journal article·2013-12

Estimate Interface Shear Stress of Woven Ceramic Matrix Composites from Hysteresis Loops

Longbiao Li, Yingdong Song

Applied Composite Materials· Volume 20· Issue 6
Publisher page

Abstract

An approach to estimate the fiber/matrix interface shear stress of woven ceramic matrix composites during fatigue loading has been developed in this paper. Based on the analysis of the microstructure, the woven ceramic matrix composites were divided into four elements of 0o warp yarns, 90o weft yarns, matrix outside of the yarns and the open porosity. When matrix cracking and fiber/matrix interface debonding occur upon first loading to the peak stress, it is assumed that fiber slipping relative to matrix in the interface debonded region of the 0o warp yarns is the mainly reason for the occurrence of the hysteresis loops of woven ceramic matrix composiets during unloading and subsequent reloading. The unloading interface reverse slip length and reloading interface new slip length are determined by the interface slip mechanisms. The hysteresis loops of three different cases have been derived. The hysteresis loss energy for the strain energy lost per volume during corresponding cycle is formulated in terms of the fiber/matrix interface shear stress. By comparing the experimental hysteresis loss energy with the computational values, the fiber/matrix interface shear stress of woven ceramic matrix composites corresponding to different cycles can then be derived. The theoretical results have been compared with experimental data of two different woven ceramic composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced ceramic materials synthesis · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos. Sci. Technol. 64, 155–170 (2004). doi: 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
2. Curtin, W.A.: Stress-strain behavior of brittle matrix composites. Comprehensive composite materials, Elsevier Science Ltd 4, 47–76 (2000). doi: 10.1016/B0-08-042993-9/00088-710.1016/B0-08-042993-9/00088-7 ↗
3. Rouby, D., Reynaud, P.: Fatigue behavior related to interface modification during load cycling in ceramic-matrix fiber composites. Comps. Sci. Technol. 48, 109–118 (1993). doi: 10.1016/0266-3538(93)90126-210.1016/0266-3538(93)90126-2 ↗
4. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall mater 43, 859–875 (1995). doi: 10.1016/0956-7151(94)00304-Z10.1016/0956-7151(94)00304-Z ↗
5. Zhu, S., Mizuno, M., Kagawa, Y., Mutoh, Y.: Monotonic tension, fatigue and creep behavior of SiC-fiber-reinforced SiC-matrix composites: a review. Compos. Sci. Technol. 59, 833–851 (1999). doi: 10.1016/S0266-3538(99)00014-710.1016/S0266-3538(99)00014-7 ↗
6. Brandstetter, J., Kromp, K., Peterlik, H., Weiss, R.: Effect of surface roughness on friction in fiber-bundle pull-out tests. Compos. Sci. Technol. 65, 981–988 (2005). doi: 10.1016/j.compscitech.2004.11.00410.1016/j.compscitech.2004.11.004 ↗
7. Kuntz, M., Grathwahl, G.: Advanced evaluation of push-in data for the assessment of fiber reinforced ceramic matrix composites. Adv. Eng. Mater. 3, 371–379 (2001). doi:10.1002/1527-2648(200106)3:6<371::AID-ADEM371>3.0.CO;2-Y10.1002/1527-2648(200106)3:6<371::AID-ADEM371>3.0.CO;2-Y ↗
8. Chandra, N., Ghonem, H.: Interfacial mechanics of push-out tests: theory and experiments. Composites-Part A. Appl. Sci. Manuf. 32, 575–584 (2001). doi: 10.1016/S1359-835X(00)00051-810.1016/S1359-835X(00)00051-8 ↗
9. Mei, H., Cheng, L.F.: Comparison of the mechanical hysteresis of carbon/ceramic matrix composites with different fiber preforms. Carbon 47, 1034–1042 (2009). doi: 10.1016/j.carbon.2008.12.02510.1016/j.carbon.2008.12.025 ↗
10. Li, L.B., Song, Y.D. and Sun, Y.C.: Modeling loading/unloading hysteresis behavior of unidirectional C/SiC ceramic matrix composites. Appl. Compos. Mat. in press, (2012). doi: 10.1007/s10443-012-9294-310.1007/s10443-012-9294-3 ↗
11. Li, L.B. and Song, Y.D.: Fatigue behavior of cross-ply C/SiC ceramic matrix composites at ambient and elevated temperatures. The 7th International Conference on High Temperature Ceramic Matrix Composites, 2010, Sep. 20-22, Bayreuth, Germany. pp: 314-319.
12. Reynaud, P.: Cyclic fatigue of ceramic-matrix composites at ambient and elevated temperatures. Compos. Sci. Technol. 56, 809–814 (1996). doi: 10.1016/0266-3538(96)00025-510.1016/0266-3538(96)00025-5 ↗
13. Dalmaz, A., Reynaud, P., Rouby, D., Fantozzi, G., Abbe, F.: Mechanical behavior and damage development during cyclic fatigue at high-temperature of a 2.5D carbon/sic composite. Compos. Sci. Technol. 58, 693–699 (1998). doi: 10.1016/S0266-3538(97)00150-410.1016/S0266-3538(97)00150-4 ↗
14. Fantozzi, G., Reynaud, P.: Mechanical hysteresis in ceramic matrix composites. Mat. Sci. Eng. A 521–522, 18–23 (2009). doi: 10.1016/jmsea.2008.09.12810.1016/j.msea.2008.09.128 ↗
15. Li, L.B., Song, Y.D.: An approach to estimate interface shear stress of ceramic matrix composites from hysteresis loops. Appl. Compos. Mat. 17, 309–328 (2010). doi: 10.1007/s10443-009-9122-610.1007/s10443-009-9122-6 ↗
16. Li, L.B., Song, Y.D. and Sun, Y.C.: Estimate interface shear stres of unidirectional C/SiC ceramic matrix composites from hysteresis loops. Appl. Compos. Mat. in press, (2012). doi: 10.1007/s10443-012-9297-010.1007/s10443-012-9297-0 ↗
17. Wang, Y.Q., Zhang, L.T., Cheng, L.F., Ma, J.Q., Zhang, W.H.: Tensile performance and damage evolution of a 2.5-D C/SiC composite characterized by Acoustic Emission. Appl. Compos. Mat. 15, 183–188 (2008). doi: 10.1007/s10443-008-9066-210.1007/s10443-008-9066-2 ↗