journal article·2014-02

Distortion of Anisotropic Hyperelastic Solids Under Pure Pressure Loading: Compressibility, Incompressibility and Near-Incompressibility

Thomas J. Pence

Journal of Elasticity· Volume 114· Issue 2
Publisher page

Abstract

The purpose of this note is to examine distortion during pure pressure loading for anisotropic hyperelastic solids. We contrast the corresponding issues in compressible and incompressible hyperelasticity, and then use these results to examine nearly incompressible materials. An anisotropic compressible hyperelastic solid will generally exhibit both volume change and distortion under hydrostatic pressure loading. In contrast, an incompressible hyperelastic solid—both isotropic and anisotropic—exhibits no change to its current state of deformation as the hydrostatic pressure is varied. Nearly incompressible hyperelastic materials are compressible, but approach an incompressible response in an appropriate limit. We examine this limiting process in the context of transverse isotropy. The issue arises as to how to implement a nearly incompressible version of a given truly incompressible material model. Here we examine how certain implementations eliminate distortion under pure pressure loading and why alternative implementations do not eliminate the distortion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Elasticity and Wave Propagation · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Baek, S., Pence, T.J.: Emergence and disappearance of fiber kinking surfaces in transversely isotropic hyperelastic materials. Z. Angew. Math. Phys. 61, 745–772 (2010)10.1007/s00033-009-0029-8 ↗
2. Blatz, P.J., Ko, W.L.: Application of finite elasticity to the deformation of rubbery materials. Trans. Soc. Rheol. 6, 223–251 (1962)10.1122/1.548937 ↗
3. Bonet, J., Wood, R.D.: Nonlinear Continuum Mechanics for Finite Element Analysis. Cambridge University Press, Cambridge (1997)
4. Carlson, D.E., Fried, E., Tortorelli, D.A.: Geometrically-based consequences of internal constraints. J. Elast. 70, 101–109 (2003)10.1023/B:ELAS.0000005582.52534.2d ↗
5. Ericksen, J.L., Rivlin, R.S.: Large elastic deformations of homogeneous anisotropic materials. J. Ration. Mech. Anal. 3, 281–301 (1954)
6. Flory, P.: Thermodynamic relations for high elastic materials. Trans. Faraday Soc. 57, 829–938 (1961)10.1039/tf9615700829 ↗
7. Guo, Z.Y., Peng, X.Q., Moran, B.: Mechanical response of neo-Hookean fiber reinforced nonlinearly elastic solids. Int. J. Solids Struct. 44, 1949–1969 (2007)10.1016/j.ijsolstr.2006.08.018 ↗
8. Hibbit, Karlsson & Sorensen, Inc.: ABAQUS/Explicit User’s Manuel, vol. 1. Hibbit, Karlsson & Sorensen, Providence (1998)
9. Holzapfel, G.A.: Nonlinear Solid Mechanics: A Continuum Approach for Engineering. Wiley, Chichester (2000)
10. Horgan, C.O.: Equilibrium solutions for compressible elastic materials. In: Fu, Y.B., Ogden, R.W. (eds.) Nonlinear Elasticity—Theory and Applications. London Mathematical Society Lecture Note Series, vol. 283. Cambridge University Press, Cambridge (2001), Chap. 4
11. Kassianidis, F., Merodio, J., Ogden, R.W., Pence, T.J.: Azimuthal shear of a transversely isotropic elastic solid. Math. Mech. Solids 13, 690–724 (2008)10.1177/1081286507079830 ↗
12. Merodio, J., Ogden, R.W.: Mechanical response of fiber-reinforced incompressible non-linearly elastic solids. Int. J. Non-Linear Mech. 40, 213–227 (2005)10.1016/j.ijnonlinmec.2004.05.003 ↗
13. Merodio, J., Saccomandi, G., Sgura, I.: The rectilinear shear of fiber-reinforced incompressible non-linearly elastic solids. Int. J. Non-Linear Mech. 42, 342–354 (2007)10.1016/j.ijnonlinmec.2006.11.002 ↗
14. Ogden, R.W.: Large deformation isotropic elasticity: on the correlation of theory and experiment for compressible rubberlike solids. Proc. R. Soc. Lond. Ser. A, Math. Phys. Sci. 328, 567–583 (1972)10.1098/rspa.1972.0096 ↗
15. Ogden, R.W.: Non-Linear Elastic Deformations. Ellis-Harwood, Chichester (1984). Dover reissue (1997)
16. Pence, T.J., Wineman, A.S.: On some connections between equivalent single material and mixture theory models for fiber reinforced hyperelastic materials. Int. J. Non-Linear Mech. 47, 285–292 (2012)10.1016/j.ijnonlinmec.2011.06.011 ↗
17. Qiu, G.Y., Pence, T.J.: Remarks on the behavior of simple directionally reinforced incompressible nonlinearly elastic solids. J. Elast. 49, 1–30 (1997)10.1023/A:1007410321319 ↗
18. Rubin, M.B., Jabareen, M.: Physically based invariants for nonlinear elastic orthotropic materials. J. Elast. 90, 1–18 (2008)10.1007/s10659-007-9119-z ↗
19. Rubin, M.B., Jabareen, M.: Further developments of physically based invariants for nonlinear elastic orthotropic solids. J. Elast. 103, 289–294 (2011)10.1007/s10659-010-9276-3 ↗
20. Simo, J.C., Miehe, C.: Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation. Comput. Methods Appl. Mech. Eng. 98, 41–104 (1992)10.1016/0045-7825(92)90170-O ↗
21. Truesdell, C., Noll, W.: The Non-Linear Field Theories of Mechanics, 2nd edn. Springer, Berlin (1992)10.1007/978-3-662-13183-1 ↗