journal article·2022-06

Exposure of thermoplastics to methanol–gasoline blends: A material compatibility study

Meenakshi Halada Nandakrishnan, Shruthi Balakrishna, Preeti Nair

Journal of Elastomers & Plastics· Volume 54· Issue 4
Publisher page

Abstract

Alcohols are increasingly being looked upon as the most viable alternative to the conventional sources of energy. Methanol is the first member of the alcohol family and can be easily synthesized from syngas. It is an attractive blend to gasoline due to its advantageous properties. There is a necessity to make sure that the infrastructure is ready to adapt these alternative fuels. Hence, the aim of this study is to assess the degradation of widely used thermoplastics in fuel tanks, pipes, and the fuel injection system, namely, polytetrafluoroethylene (PTFE), polyethyleneterephthalate (PET), and high density polyethylene (HDPE) post exposure to methanol–gasoline blends (P100, M15, and M30) for a period of 4, 10, and 30 days. The effects of the exposure were examined by comparing changes in gain/loss of mass, hardness, elongation, and tensile strength. The surface morphology changes of the polymeric coupons were characterized by scanning electron microscopy and their elemental analysis was done by energy dispersive X-ray spectroscopy. The studied materials were found to gain mass in the order HDPE > PTFE >PET. The decrease in hardness was found to be more in HDPE followed by PTFE and PET. PTFE and PET showed reduction in strength but an increase in tensile strength was observed for HDPE post exposure to fuel blend. Highest change in elongation was found in HDPE followed by PTFE and PET. The changes were found to be the least in P100 followed by M15 and maximum in M30 blends for all immersion periods.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer crystallization and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Incubation, Innovation, Research and Consultancy, Jyothy Institute of Technology, Thataguni, India

PES University, Near Electronics City, India

Funding

Department of Science and Technology, Government of India

References (25)

Show source-provided references
1. 10.1016/j.rser.2017.03.08010.1016/j.rser.2017.03.080 ↗
2. 10.1016/j.fuel.2012.09.02010.1016/j.fuel.2012.09.020 ↗
3. 10.1016/j.applthermaleng.2006.12.02410.1016/j.applthermaleng.2006.12.024 ↗
4. Hobson C · 2018
5. ASTM International · 2018
6. 10.5254/1.353862710.5254/1.3538627 ↗
7. 10.1016/j.wear.2010.12.00310.1016/j.wear.2010.12.003 ↗
8. 10.1016/j.eurpolymj.2005.02.00510.1016/j.eurpolymj.2005.02.005 ↗
9. Kass M · SAE Int J Fuels Lubricants · 13 · 137
10. 10.4271/2015-01-089410.4271/2015-01-0894 ↗
11. Dhaliwal JS · J Fuels · 2014 · 29 · 2014
12. 10.1016/j.fuel.2011.12.00310.1016/j.fuel.2011.12.003 ↗
13. 10.1016/j.fuel.2015.09.06010.1016/j.fuel.2015.09.060 ↗
14. 10.14233/ajchem.2017.2052810.14233/ajchem.2017.20528 ↗
15. 10.4028/www.scientific.net/AMR.1098.5110.4028/www.scientific.net/AMR.1098.51 ↗
16. 10.1016/j.energy.2010.12.02310.1016/j.energy.2010.12.023 ↗
17. Meenakshi HN · J Chem Technol Metall · 2020 · 55 · 2187
18. ASTM International · 2015
19. ASTM International · 2014
20. 10.1016/0010-938X(82)90097-X10.1016/0010-938X(82)90097-X ↗
21. 10.1016/j.energy.2014.02.08710.1016/j.energy.2014.02.087 ↗
22. 10.1016/j.polymdegradstab.2013.07.01710.1016/j.polymdegradstab.2013.07.017 ↗
23. Jiangfang Z · 2019 · 009524431989120
24. Gabriel LH · 1998
25. 10.1016/j.polymertesting.2021.10714110.1016/j.polymertesting.2021.107141 ↗