A Non-Destructive Method for Evaluation of the Out of Plane Elastic Modulus of Porous and Composite Materials
Source abstract
Abstract
This paper presents an effective and reliable non-destructive method to measure the Young Modulus of porous and out of plane Young Modulus of composite materials using sound waves. First, a Finite Element Model based on Representative Volume Element (RVE) is developed to demonstrate how the elastic properties of composite material can be estimated by acoustic measurements using an impedance tube test rig. Second, the results of the experimental measurement campaign was carried out to validate the proposed method. In particular, two soft elastic foams with different density, an epoxy-carbon fibre composite and vynilester-glass fibre composite were tested. In the proposed method, a two-microphone impedance tube setup was used where the measured acoustic pressures at two upstream locations allowed the estimation of the reflection coefficient and the acoustic impedance of the tested materials. Since the acoustic impedance can be expressed as a function of the longitudinal speed of sound (assuming a plane standing wave excitation), the elastic modulus can be estimated which is associated with the speed of sound. The elastic modulus measured using the proposed method were in good agreement with the values obtained by the standard methods such as tensile tests and ultrasound time of flight measurements. The proposed method would allow in an accurate and fast manner the non-destructive evaluation of Young Modulus of porous materials and for the first time the proposed approach is applied successfully to the measurement of out of plane Young modulus of composite materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Phenomena Research · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Petersen, K.E.: Silicon as a mechanical material. Proc. IEEE. 70, 420–457 (1982)10.1109/PROC.1982.12331 ↗
2. Oliver, W.C., Pharr, G.M.: Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J. Mater. Res. 19, 3–20 (2004)10.1557/jmr.2004.19.1.3 ↗
3. Oliver, W.C., Pharr, G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992)10.1557/JMR.1992.1564 ↗
4. Lang, S.B.: Ultrasonic method for measuring elastic coefficients of bone and results on fresh and dried bovine bones. IEEE Trans. Biomed. Eng. BME-17, 101–105 (1970)10.1109/TBME.1970.4502706 ↗
5. Ashman, R., Cowin, S., Van Buskirk, W., Rice, J.: A continuous wave technique for the measurement of the elastic properties of cortical bone. J. Biomech. 17, 349–361 (1984)10.1016/0021-9290(84)90029-0 ↗
6. Rho, J.Y., Ashman, R.B., Turner, C.H.: Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. J. Biomech. 26, 111–119 (1993)10.1016/0021-9290(93)90042-D ↗
7. Jones, M.G., Stiede, P.E.: Comparison of methods for determining specific acoustic impedance. J. Acoust. Soc. Am. 101, 2694–2704 (1997)10.1121/1.418558 ↗
8. Dalmont, J.-P.: Acoustic impedance measurement, part I: a review. J. Sound Vib. 243, 427–439 (2001)10.1006/jsvi.2000.3428 ↗
9. Kumar, A., Kumar, B., Kumar, Y.: A novel method to determine the acoustic impedance of membrane material. Ultrasonics. 35, 53–56 (1997)10.1016/S0041-624X(96)00090-X ↗
10. Song, B.H., Bolton, J.S.: A transfer-matrix approach for estimating the characteristic impedance and wave numbers of limp and rigid porous materials. J. Acoust. Soc. Am. 107, 1131–1152 (2000)10.1121/1.428404 ↗
11. Doutres, O., Salissou, Y., Atalla, N., Panneton, R.: Evaluation of the acoustic and non-acoustic properties of sound absorbing materials using a three-microphone impedance tube. Appl. Acoust. 71, 506–509 (2010)10.1016/j.apacoust.2010.01.007 ↗
12. Buchaillot, L., Farnault, E., Hoummady, M., Fujita, H.: Silicon nitride thin films Young's modulus determination by an optical non destructive method. Jpn. J. Appl. Phys. 36, L794–L797 (1997)10.1143/JJAP.36.L794 ↗
13. França, D., Blouin, A.: All-optical measurement of in-plane and out-of-plane Young's modulus and Poisson's ratio in silicon wafers by means of vibration modes. Meas. Sci. Technol. 15, 859–868 (2004)10.1088/0957-0233/15/5/011 ↗
14. ASTM 1050, “Standard test method for impedance and absorption of acoustical materials using a tube, two microphones and a digital frequency analysis system”, Astm International, (2012)
15. Chung, J.Y., Blaser, D.A.: Transfer function method of measuring in-duct acoustic properties. I. Theory. J. Acoust. Soc. Am. 68, 907–913 (1980)10.1121/1.384778 ↗
16. Chung, J.Y., Blaser, D.A.: Transfer function method of measuring in-duct acoustic properties. II. Experiment. J. Acoust. Soc. Am. 68, 914–921 (1980)10.1121/1.384779 ↗
17. J. Han, D.W. Herrin, A. F. Seybert, “Accurate measurement of small absorption coefficient”, Sae International, 01–2224 (2007)10.4271/2007-01-2224 ↗
18. ISO 10534-2/2, “Acoustic-Determination of sound absorption coefficient and impedance in impedance tubes – Part 2: Transfer-function method”
19. J. David, N. Cheeke, “Fundamentals and Applications of Ultrasonic Wave”, CRC PRESS, (2002)
20. A. B. Wood, “A Textbook of Sound”, G. Bell and Sons Ltd, (1964)
21. D.T. Blackstock, “Fundamentals of Physical Acoustics”, John Wiley & Sons, (2000)
22. Sun, W., Guan, Z., Li, Z., Zhang, M., Huang, Y.: Compressive failure analysis of unidirectional carbon/epoxy composite based on micro-mechanical models. Chin. J. Aeronaut. 30, 1907–1918 (2017)10.1016/j.cja.2017.10.002 ↗
23. Chen, X.L., Liu, Y.J. Square representative volume elements for evaluating the effective material properties of carbon nanotube-based composite. Comput. Mater. Sci. 29, 1–11 (2004)10.1016/S0927-0256(03)00090-9 ↗
24. Odegard, G.M.: Costitutive modelling of piezoelectric polymer composite. Acta Mater. 52, 5315–5330 (2004)10.1016/j.actamat.2004.07.037 ↗
25. Kari, S., Berger, H., Rodriguez-Ramos, R., Gabbert, U.: Computational evaluation of effective material properties of composite reinforced by randomly distributed spherical particles. Compos. Struct. 77, 223–231 (2007)10.1016/j.compstruct.2005.07.003 ↗
26. Hollister, S.J., Kikuchi, N.: A comparison of homogenization and standard mechanics analysis for periodic porous composites. Comput. Mech. 10, 73–95 (1992)10.1007/BF00369853 ↗
27. Iorga, L., Pan, Y., Pelegri, A.: Numerical characterization of material elastic properties for random fiber composites. J. Mech. Mater. Struct. 3, 1279–1298 (2008)10.2140/jomms.2008.3.1279 ↗
28. Pelissou, C., Baccou, J., Monerie, Y., Perales, F.: Determination of the size of the representative volume element for random quasi-brittle composite. Int. J. Solids Struct. 46, 2842–2855 (2009)10.1016/j.ijsolstr.2009.03.015 ↗
29. Babu, K.P., Mohite, P.M., Upadhyay, C.S.: Development of an RVE and its stiffness predictions based on mathematical homogenization theory for short fiber composites. Int. J. Solids Struct. 130-131, 80–104 (2018)10.1016/j.ijsolstr.2017.10.011 ↗
30. Xia, Z., Zhang, Y., Ellyin, F.: A unified periodical boundary conditions for representative volume elements of composites and applications. Int. J. Solids Struct. 40, 1907–1921 (2003)10.1016/S0020-7683(03)00024-6 ↗
31. Smit, R.J.M., Brekelmans, W.A.M., Meijer, H.E.H.: Prediction of the mechanical behaviour of nonlinear heterogeneous system by multi-level finite element modelling. Comput. Methods Appl. Mech. Eng. 155, 181–192 (1998)10.1016/S0045-7825(97)00139-4 ↗
32. Segurado, J., Llorca, J.: A numerical approximation to the elastic properties of sphere-reinforced composites. Journal of the Mechanics and Physics of Solid. 50, 2107–2121 (2002)10.1016/S0022-5096(02)00021-2 ↗
33. Huet, C.: Application of variational concepts to size effects in elastic heterogeneous bodies. J. Mech. Phys. Solids. 8, 812–841 (1990)
34. Hazanov, S., Huet, C.: Order relationships for boundary condition effects in heterogeneous bodies smaller than the representative volume. J. Mech. Phys. Solids. 42, 1995–2011 (1994)10.1016/0022-5096(94)90022-1 ↗
35. K. J. Bathe, “Finite Element Procedures”, Prentice-Hall, (1996)
36. O. C. Zienkiewicz, R. E. Newton. "Coupled Vibrations of a Structure Submerged in a Compressible Fluid", Procedings of the symposium on finite element techniques, (1969)
37. Soden, P.D., Hinton, M.J., Kaddour, A.S.: Lamina Properties. Lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates. Compos. Sci. Technol. 58(7), 1011–1022 (1998)10.1016/S0266-3538(98)00078-5 ↗
38. ASTM E 494, “Standard practice for measuring ultrasonic velocity in materials”, Astm International, (2012)
39. ASTM D 3574, “Standard Test Method for Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams ”, Astm International, (2012)