journal article·2025-12-23Open access

Study on the structural, ferroelectric, and optical properties of KNN ferroelectric ceramics doped with Cu

J. Estrella-Nuñez, K. M. Moya-Canul, J. J. Serralta-Macias, D. Olguín, J. Martín Yáñez-Limón

Abstract

Abstract In this work, the influence of Cu doping (0, 0.5, and 1.0 mol% Cu) on the structural, ferroelectric, dielectric, and optical properties of the K0.5Na0.5NbO3 (KNN) electroceramic system was investigated. Bulk samples were synthesized via the conventional ceramic method, calcined at 900 °C for 4 h, pressed uniaxially at 385 MPa, and sintered at 1100 °C for two different time intervals:1 and 3 h. The XRD patterns of the calcined powders confirmed the formation of the perovskite structure, and the SEM micrographs of the sintered samples revealed grain sizes between 1 and 2 μm. Hysteresis loops (polarization vs. applied electric field) revealed ferroelectric behavior in the pure KNN and KNN1%Cu samples; in contrast, KNN0.5%Cu showed a pinched hysteresis loop, characteristic of antiferroelectric or aging behavior. Dielectric function as a function of temperature allows identifying the reported temperatures of the crystalline phase transitions of KNN, orthorhombic–tetragonal, and tetragonal–cubic, which occur at approximately 200 °C and 420 °C respectively; the highest temperature corresponds to the Curie temperature, where a transition to the paraelectric phase occurs. First-principles calculations were realized to determine the band structure and density of states for pristine and Cu-doped KNN. The calculated energy gap, E g , was compared with that measured experimentally, where we found an appreciable reduction in E g , with Cu doping from 3.13 eV for pure KNN to 1.75 eV for KNN with 1% Cu.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A. Bain, P. Chand, Ferroelectrics: Principles and Applications (Wiley-VCH, Weinheim Germany, 2017), pp. 195–23310.1002/9783527805310.ch5 ↗
2. G. Haertling, Ferroelectric ceramics: history and technology. J. Am. Ceram. Soc. 82, 797 (1999). https://doi.org/10.1111/j.1151-2916.1999.tb01840.x10.1111/j.1151-2916.1999.tb01840.x ↗
3. H. Zhang, W. Tian, Q. Zhang, W. Ma, P. Fan, D. Salamon, S. Zhang, B. Nan, H. Tan, Z. Ye, A review on the development of Lead-free ferroelectric Energy-Storage ceramics and multilayer capacitors. J. Mater. Chem. C 8, 16648 (2020). https://doi.org/10.1039/D0TC04381H10.1039/D0TC04381H ↗
4. J. Ge, D. Remiens, X. Dong, Y. Chen, J. Costecalde, F. Gao, F. Cao, G. Wang, Enhancement of energy storage in epitaxial PbZrO3 antiferroelectric films using strain engineering. Appl. Phys. Lett. 105, 112908 (2014). https://doi.org/10.1063/1.489615610.1063/1.4896156 ↗
5. X. Hao, J. Zhai, L.B. Kong, Z. Xu, A comprehensive review on the progress of lead zirconate-based antiferroelectric materials. Prog. Mater. Sci. 63, 1 (2014). https://doi.org/10.1016/j.pmatsci.2014.01.00210.1016/j.pmatsci.2014.01.002 ↗
6. V.S. Kujur, R. Gaur, V. Gupta, S. Singh, Significantly enhanced UV-light-driven photocatalytic performance of ferroelectric (K0.5Na0.5)NbO3: effect of corona-poling and particle size. J. Phys. Chem. Solids. 167, 110751 (2022). https://doi.org/10.1016/j.jpcs.2022.11075110.1016/j.jpcs.2022.110751 ↗
7. A. Blázquez-Castro, A. García-Cabañes, M. Carrascos, Biological applications of ferroelectric materials. Appl. Phys. Rev. 5, 041101 (2018). https://doi.org/10.1063/1.504447210.1063/1.5044472 ↗
8. S. Pal, N.V. Sarath, K.S. Priya, P. Murugavel, A review on ferroelectric systems for next generation photovoltaic applications. J. Phys. D: Appl. Phys. 55, 283001 (2022). https://doi.org/10.1088/1361-6463/ac52f410.1088/1361-6463/ac52f4 ↗
9. K. Shibata, R. Wang, T. Tou, J. Koruza, Applications of lead-free piezoelectric materials. MRS Bull. 43, 612 (2018). https://doi.org/10.1557/mrs.2018.18010.1557/mrs.2018.180 ↗
10. J. 1 Koruza, H. Liu, M. Höfling, M.H. Zhang, P. Veber, (K,Na)NbO3-based piezoelectric single crystals: growth methods, properties, and applications. J. Mat. Res. 35, 990 (2020). https://doi.org/10.1557/jmr.2019.39110.1557/jmr.2019.391 ↗
11. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya, M. Nakamura, Lead-free piezoceramics. Nature. 432, 84–87 (2004). https://doi.org/10.1038/nature0302810.1038/nature03028 ↗
12. D. Lin, K. Kwok, H. Chan, Double hysteresis loop in K0.5Na0.5NbO3 Cu-doped lead-free piezoelectric ceramics. Appl. Phys. Lett. 90, 232903 (2007). https://doi.org/10.1063/1.274608710.1063/1.2746087 ↗
13. R. López-Juárez, F. González, M.E. Villafuerte-Castrejón, (2011). Lead-Free Ferroelectric Ceramics with Perovskite Structure, Ferroelectrics - Material Aspects, ed by Mickaël Lallart (ISBN: 978-953-307-332-3, InTech, Croatia, (2011), p. 305
14. Y. Liao, D. Wang, H. Wang, L. Zhou, Q. Zheng, D. Lin, Modulation of defects and electrical behaviors of Cu-doped KNN ceramics by fluorine–oxygen substitution. Dalton Trans. 49, 1311 (2020). https://doi.org/10.1039/C9DT04133H10.1039/C9DT04133H ↗
15. S. Ke, H. Huang, H. Fan, L. Zhou, Y. Wai, Antiferroelectric-like properties and enhanced polarization of Cu-doped K0.5Na0.5NbO3 piezoelectric ceramics. Appl. Phys. Lett. 101, 082901 (2012). https://doi.org/10.1063/1.474721210.1063/1.4747212 ↗
16. E.M. Alkoy an, M. Papila, Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics. Ceramics International. 3, 1921 (2010) https://doi.org/10.1016/j.ceramint.2010.03.01810.1016/j.ceramint.2010.03.018 ↗
17. D.J. Singh, Ground-state properties of lanthanum: treatment of extended-core States. Phys. Rev. B 43, 6388 (1991). https://doi.org/10.1103/PhysRevB.43.638810.1103/PhysRevB.43.6388 ↗
18. M. Ernzerhofa, G.E. Scuseria, Assessment of the Perdew–Burke–Ernzerhof exchange-correlation functional. J. Chem. Phys. 110, 5029 (1999). https://doi.org/10.1063/1.47840110.1063/1.478401 ↗
19. H.J. Monkhorst, J.D. Pack, Special points for Brillouin-zone integrations. Phys. Rev. B 13, 5188 (1976). https://doi.org/10.1103/PhysRevB.13.518810.1103/PhysRevB.13.5188 ↗
20. A. Živkovic, A. Roldan, N.H. de Leeuw, Density functional theory study explaining the underperformance of copper oxides as photovoltaic absorbers. Phys. Rev. B 99, 035154 (2019). https://doi.org/10.1103/PhysRevB.99.03515410.1103/PhysRevB.99.035154 ↗
21. R.D. Shannon, Revised effective ionic radii systematic studies of interatomic distances in halides and chalcogenides. Acta Cryst. A32, 751 (1976). https://doi.org/10.1107/S056773947600155110.1107/S0567739476001551 ↗
22. A.K. Bera, and S. M. Yusuf. Functional Perovskites: Structure-Properties Correlations. Chap No. 2 in Perovskites and Other Framework Structure Crystalline Materials: Volume 5(1) ed by P. Saint-Grégoire and M.B SmirnovColl. Acad. (2021) p.39 Origin of ferromagnetism in Cu-doped ZnO. Scientific reports. 9, 2461 (2019) https://doi.org/10.1038/s41598-019-39660-x10.1038/s41598-019-39660-x ↗
23. C.A. Paz de Araujo, J.D. Cuchiaro, L.D. McMillan, M.C. Scott, J.F. Scott, Fatigue-free ferroelectric capacitors with platinum electrodes. Nature. 374, 627–629 (1995). https://doi.org/10.1038/374627a010.1038/374627a0 ↗
24. M. Bousquet, J.-R. Duclère, E. Orhan, A. Boulle, C. Bachelet, C. Champeaux, Optical properties of an epitaxial Na0.5Bi0.5TiO3 thin film grown by laser ablation: experimental approach and density functional theory calculations. J. Appl. Phys. 107, 104–107 (2010). https://doi.org/10.1063/1.340009510.1063/1.3400095 ↗
25. S. Piskunov, E. Heifets, R.I. Eglitis, G. Borstel, Bulk properties and electronic structure of SrTiO3, BaTiO3, PbTiO3 perovskites: an ab-initio HF/DFT study. Comput. Mater. Sci. 29, 165 (2004). https://doi.org/10.1016/j.commatsci.2003.08.03610.1016/j.commatsci.2003.08.036 ↗
26. S.Y. Liu, S. Liu, D.J. Li, Y. Shen, H. Dang, Y. Liu, W. Xue, S. Wang, Structure, phase transition, and electronic properties of K1– xNaxNbO3 solid solutions from First-Principles theory. J. Am. Ceram. Soc. 97, 4019 (2014). https://doi.org/10.1111/jace.1318810.1111/jace.13188 ↗
27. D. Yang, L.L. Wei, X.L. Chao, Z.P. Yang, X.Y. Zhou, First-Principles calculation of the effects of Li-doping on the structure and piezoelectricity of (K0.5Na0.5)NbO3 Lead-free ceramics. Phys. Chem. Chem. Phys. 18, 7702–7706 (2016). https://doi.org/10.1039/C5CP06629H10.1039/C5CP06629H ↗
28. S. Duhalde, M.F. Vignolo, F. Golmar, C. Chiliotte, C.E. Rodríguez Torres, L.A. Errico, A.F. Cabrera, M. Rentería, F.H. Sánchez, Weissmann appearance of room-temperature ferromagnetism in Cu-doped TiO2 – d films. Phy Rev. B 72, 161313 (2005). https://doi.org/10.1103/PhysRevB.72.16131310.1103/PhysRevB.72.161313 ↗
29. N. Ali, B. Singh, Z. Ahmed Khan, A. R. Vijaya, K. Tarafder and S. Ghosh, Origin of ferromagnetism in Cu-doped ZnO. Scientific Reports 9, 2461 (2019). https://doi.org/10.1038/s41598-019-39660-x10.1038/s41598-019-39660-x ↗
30. J. Ryu, J.J. Choi, B.D. Hahn, D.S. Park, W.H. Yoon, K.Y. Kim, Sintering and piezoelectric properties of KNN ceramics doped with KZT. IEEE Trans. Ultrason. Ferroelectr. Freq. Control. 54, 2510 (2007). https://doi.org/10.1109/TUFFC.2007.56910.1109/TUFFC.2007.569 ↗
31. M. Matsubara, T. Yamaguchi, K. Kikuta, S.I. Hirano, Sintering and piezoelectric properties of potassium sodium niobate ceramics with newly developed sintering aid. Jpn J. Appl. Phys. 44, 258 (2005). https://doi.org/10.1143/JJAP.44.25810.1143/JJAP.44.258 ↗
32. M. Wegrzyn, Sodium potassium niobate based piezoelectric ceramics, Ph. D. Thesis, University of Manchester, (2012)
33. C. Montero-Tavera, M.D. Durruthy-Rodríguez, F.D. Cortés-Vega, J.M. Yañez-Limón, Study of the structural, ferroelectric, dielectric, and pyroelectric properties of the K0.5Na0.5NbO3 system doped with Li+, La3+, and Ti4+. J. Adv. Ceram. 9, 329 (2020). https://doi.org/10.1007/s40145-020-0372-y10.1007/s40145-020-0372-y ↗
34. E. Hollenstein, M. Davis, D. Damjanovic, N. Setter, Piezoelectric properties of Li- and Ta-modified (K0.5Na0.5)NbO3 ceramics. Appl. Phys. Lett. 87, 182905 (2005). https://doi.org/10.1063/1.212338710.1063/1.2123387 ↗
35. L. Jin, F. Li, S. Zhang, Decoding the fingerprint of ferroelectric loops: comprehension of the material properties and structures. J. Am. Ceram. Soc. 97, 1 (2014). https://doi.org/10.1111/jace.1277310.1111/jace.12773 ↗
36. P. Fu, Z. Xu, R. Chu, W. Li, G. Zang, J. Hao, Piezoelectric, ferroelectric and dielectric properties of La2O3-doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics. Mater. Des. 31, 796 (2010). https://doi.org/10.1016/j.matdes.2009.07.05610.1016/j.matdes.2009.07.056 ↗
37. E. Li, H. Kakemoto, S. Wada, T. Tsurumi, Enhancement of Qm by co-doping of Li and Cu to potassium sodium niobate lead-free ceramics. IEEE Trans. Ultrason. Ferroelectr. Freq. Control. 55, 980 (2008). https://doi.org/10.1109/TUFFC.2008.74310.1109/TUFFC.2008.743 ↗
38. P. Manca, A Relation Between The Binding Energy And The Band-Gap Energy In Semiconductors Of Diamond Or Zinc-Blende Structure J. Phys. Chem. Solids Pergamon Press. 20, Nos. 314, pp. 268–273 (1961)10.1016/0022-3697(61)90013-0 ↗