Porous Ba0.85Ca0.15Zr0.1Ti0.9O3 Ceramics for Pyroelectric Applications
Source abstract
Abstract
Porous Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ferroelectric ceramics were fabricated using a solid-state reaction consisting of BCZT and poly(methyl methacrylate)(PMMA) (2%, 4%, 8% and 10% by wt.%) as a pore former. By increasing the PMMA content from 0% to 10%, porosity increased from 8% to 29%. It was found that the dielectric constant (er) decreased and the dielectric loss (tanδ) increased with increasing porosity. At 29% porosity, er of the BCZT was found to decrease more, from 3481 to 1117 at 5 kHz and at room temperature. The dielectric constant and volume-specific heat capacity decreased with the increase in porosity which ultimately improved the pyroelectric figure-of-merits (FOMs). Further, the pyroelectric FOMs were estimated and found to be improved at optimum porosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. S.T. Lau, C.H. Cheng, S.H. Choy, D.M. Lin, K.W. Kwok, and H.L.W. Chan, J. Appl. Phys. 103, 104105 (2008).10.1063/1.2927252 ↗
2. S. Bauer and B. Ploss, J. Appl. Phys. 68, 6361 (1990).10.1063/1.346882 ↗
3. R.W. Whatmore, Rep. Prog. Phys. 49, 1335 (1986).10.1088/0034-4885/49/12/002 ↗
4. S. Patel, A. Chauhan, and R. Vaish, Int. J. Appl. Ceram. Technol. 12, 899 (2015).10.1111/ijac.12418 ↗
5. K.S. Srikanth, S. Patel, S. Steiner, and R. Vaish, Scr. Mater 146, 146 (2018).10.1016/j.scriptamat.2017.11.027 ↗
6. S. Patel, D. Sharma, A. Singh, and R. Vaish, J. Materiomics 2, 75 (2016).10.1016/j.jmat.2016.01.002 ↗
7. R. Vaish, Int. J. Appl. Ceram. Technol. 10, 682 (2013).10.1111/j.1744-7402.2012.02765.x ↗
8. G. Zhang, S. Jiang, Y. Zhang, and T. Xie, Curr. Appl. Phys. 9, 1434 (2009).10.1016/j.cap.2009.03.019 ↗
9. Y. Zeng, F. Yao, G. Zhang, S. Liu, S. Jiang, Y. Yu, J. He, L. Zhang, and J. Yi, Ceram. Int. 39, 3709 (2013).10.1016/j.ceramint.2012.10.204 ↗
10. G. Zhang, M. Li, H. Li, Q. Wang, and S. Jiang, Energy Technol. 6, 791 (2018). https://doi.org/10.1002/ente.201700622 .10.1002/ente.201700622 ↗
11. T. Yu, G. Zhang, Y. Yu, Y. Zeng, and S. Jiang, Sens. Actuators A 223, 159 (2015).10.1016/j.sna.2015.01.008 ↗
12. S. Kar-Narayan and N.D. Mathur, J. Phys. D. 43, 032002 (2010).10.1088/0022-3727/43/3/032002 ↗
13. M. Ožbolt, A. Kitanovski, J. Tušek, and A. Poredoš, Int. J. Refrig. 40, 174 (2014).10.1016/j.ijrefrig.2013.11.007 ↗
14. M. Valant, Prog. Mater Sci. 57, 980 (2012).10.1016/j.pmatsci.2012.02.001 ↗
15. B. Charlot, D. Coudouel, F. Very, P. Combette, and A. Giani, Sens. Actuators Phys. 225, 103 (2015).10.1016/j.sna.2015.02.011 ↗
16. M. Vaish, M. Sharma, R. Vaish, and V.S. Chauhan, Integr. Ferroelectr. 167, 90 (2015).10.1080/10584587.2015.1106876 ↗
17. S.B. Lang, Phys. Today 58, 31 (2005).10.1063/1.2062916 ↗
18. G.Z. Zhang, S.L. Jiang, Y.K. Zeng, Y.Y. Zhang, Q.F. Zhang, and Y. Yu, J. Am. Ceram. Soc. 92, 3132 (2009).10.1111/j.1551-2916.2009.03355.x ↗
19. K.S. Srikanth, V.P. Singh, and R. Vaish, J. Eur. Ceram. Soc. 37, 3943 (2017).10.1016/j.jeurceramsoc.2017.05.015 ↗
20. S. Patel, A. Chauhan, S. Kundu, N.A. Madhar, B. Ilahi, R. Vaish, and K.B.R. Varma, AIP Adv. 5, 087145 (2015).10.1063/1.4929328 ↗
21. S. Patel, A. Chauhan, and R. Vaish, Solid State Sci. 52, 10 (2016).10.1016/j.solidstatesciences.2015.11.014 ↗
22. K.S. Srikanth, S. Patel, S. Steiner, and R. Vaish, Appl. Phys. Lett. 110, 232901 (2017).10.1063/1.4984798 ↗
23. K.S. Srikanth and R. Vaish, J. Eur. Ceram. Soc. 37, 3927 (2017).10.1016/j.jeurceramsoc.2017.04.058 ↗
24. S. Patel, A. Chauhan, S. Kundu, N.A. Madhar, B. Ilahi, R. Vaish, and K.B.R. Varma, AIP Adv. 5, 087145 (2015).10.1063/1.4929328 ↗
25. S.L. Jiang, P. Liu, X.S. Zhang, L. Zhang, Q. Li, J.L. Yao, Y.K. Zeng, Q. Wang, and G.Z. Zhang, J. Alloys Compd. 636, 93 (2015).10.1016/j.jallcom.2015.02.153 ↗
26. Y.Y. Zhang, G.S. Wang, T. Zeng, R.H. Liang, and X.L. Dong, J. Am. Ceram. Soc. 90, 1327 (2007).10.1111/j.1551-2916.2007.01526.x ↗
27. B.P. Kumar, H.H. Kumar, and D.K. Kharat, Mat Sci Eng B-Solid 127, 130 (2006).10.1016/j.mseb.2005.10.003 ↗
28. K.S. Srikanth, V.P. Singh, and R. Vaish, Int. J. Appl. Ceram. Technol. 15, 140 (2018).
29. T. Ohji and M. Fukushima, Int. Mater. Rev. 57, 115 (2012).10.1179/1743280411Y.0000000006 ↗
30. J. Roscow, Y. Zhang, J. Taylor, and C.R. Bowen, Eur. Phys. J Spec. Top. 224, 2949 (2015).10.1140/epjst/e2015-02600-y ↗
31. H.L. Zhang, J.F. Li, and B.P. Zhang, Acta Mater. 55, 171 (2007).10.1016/j.actamat.2006.07.032 ↗
32. T. Zeng, X.L. Dong, C.L. Mao, Z.Y. Zhou, and H. Yang, J. Eur. Ceram. Soc. 27, 2025 (2007).10.1016/j.jeurceramsoc.2006.05.102 ↗
33. G. Suyal and N. Setter, J. Eur. Ceram. Soc. 24, 247 (2004).10.1016/S0955-2219(03)00239-5 ↗
34. Q. Zhang, S. Corkovic, C.P. Shaw, Z. Huang, and R.W. Whatmore, Thin Solid Films 488, 258 (2005).10.1016/j.tsf.2005.04.034 ↗
35. S. Kumamoto, K. Mizumura, Y. Kurihara, H. Ohhashi, and K. Okuno, Jpn. J. Appl. Phys. 30, 2292 (1991).10.1143/JJAP.30.2292 ↗
36. S.B. Lang and D. Das-Gupta, Handbook of Advanced Electronic and Photonic Materials and Devices (San Diego: Academic Press, 2001), p. 235.
37. S. Yao, W. Ren, H. Ji, X. Wu, P. Shi, D. Xue, X. Ren, and Z.G. Ye, J. Phys. D Appl. Phys. 45, 195301 (2012).10.1088/0022-3727/45/19/195301 ↗
38. G. Zhang, S. Jiang, Y. Zeng, Y. Zhang, Q. Zhang, and Y. Yu, J. Appl. Phys. 106, 034110 (2009).10.1063/1.3183921 ↗
39. P. Yu, Y.D. Ji, N. Neumann, S.G. Lee, H. Luo, and M. Es-Souni, IEEE Trans. Ultrason. Ferr. 59, 1983 (2012).10.1109/TUFFC.2012.2417 ↗
40. Y.X. Tang and H.S. Luo, J. Phys. D Appl. Phys. 42, 075406 (2009).
41. G. Singh, V.S. Tiwari, and P.K. Gupta, Appl. Phys. Lett. 103, 202903 (2013).10.1063/1.4829635 ↗
42. C.R. Bowen, J. Taylor, E. LeBoulbar, D. Zabek, A. Chauhan, and R. Vaish, Energ. Environ. Sci. 7, 3836 (2014).
43. R. Sun, J. Wang, F. Wang, T. Feng, Y. Li, Z. Chi, X. Zhao, and H. Luo, J. Appl. Phys. 115, 074101 (2014).10.1063/1.4866327 ↗
44. L. Xing, C. Zhihui, W. Dun, F. Bijun, D. Jianning, Z. Xiangyong, X. Haiqing, and L. Haosu, Jpn. J. Appl. Phys. 54, 071501 (2015).10.7567/JJAP.54.071501 ↗
45. C.R. Bowen, J. Taylor, E. Le Boulbar, D. Zabek, and V.Y. Topolov, Mater. Lett. 138, 243 (2015).10.1016/j.matlet.2014.10.004 ↗
46. J. Zhang, X. Dong, F. Cao, S. Guo, and G. Wang, Appl. Phys. Lett. 102, 102908 (2013).10.1063/1.4795795 ↗
47. X. Liu, D. Wu, Z. Chen, B. Fang, J. Ding, X. Zhao, and H. Luo, Adv. Appl. Ceram. 114, 436 (2015).10.1179/1743676115Y.0000000015 ↗
48. Y. Zhang, Y. Bao, D. Zhang, and C.R. Bowen, J. Am. Ceram. Soc. 98, 2980 (2015).10.1111/jace.13797 ↗
49. H. Zhang, S. Jiang, and K. Kajiyoshi, J. Am. Ceram. Soc. 93, 1957 (2010).10.1111/j.1551-2916.2010.03651.x ↗
50. A. Seifert, P. Muralt, and N. Setter, Appl. Phys. Lett. 72, 2409 (1998).10.1063/1.121391 ↗
51. A. Seifert, L. Sagalowicz, P. Muralt, and N. Setter, J. Mater. Res. 14, 2012 (1999).10.1557/JMR.1999.0272 ↗