journal article·2011-02Open access

Cu(In,Ga)Se2 Thin Film Preparation from a Cu(In,Ga) Metallic Alloy and Se Nanoparticles by an Intense Pulsed Light Technique

Sanjay R. Dhage, Hak-Sung Kim, H. Thomas Hahn

Journal of Electronic Materials· Volume 40· Issue 2

Abstract

The main contribution of this paper is the development of a novel process for the formation of copper indium gallium diselenide (CIGS) films. CIGS films with a thickness of 4 μm and grain size from 0.3 μm to 1 μm were prepared from a Cu(In0.7Ga0.3) (CIG) metallic alloy and Se nanoparticles by the intense pulsed light (IPL) technique. The melting of the CIG and Se nanoparticles and nucleation of CIGS occurred in a very short reaction time of 2 ms. It is believed that the Se diffuses into the CIG lattice to form the CIGS chalcopyrite crystal structure. The tetragonal chalcopyrite crystal structure was confirmed by x-ray powder diffraction (XRD), while the microstructure and composition were determined by field-emission scanning electron microscopy (FESEM), energy-dispersive x-ray spectroscopy (EDAX), and x-ray fluorescence (XRF) spectroscopy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. I. Repins, M.A. Contreras, B. Egaas, C. DeHart, J. Scharft, C.L. Perkins, B. To, and R. Noufi, Prog. Photovolt. Res. Appl. 16, 235 (2008).10.1002/pip.822 ↗
2. F.S. Hasoon, Y. Yan, H. Althani, K.M. Jones, H.R. Moutinho, J. Alleman, M.M. Al-Jassim, and R. Noufi, Thin Solid Films 387, 1 (2001).10.1016/S0040-6090(00)01724-7 ↗
3. A.N. Tiwari, M. Krejci, F.J. Haug, and H. Zogg, Prog. Photovolt. Res. Appl. 7, 393 (1999).10.1002/(SICI)1099-159X(199909/10)7:5<393::AID-PIP289>3.0.CO;2-4 ↗
4. N.G. Dhere, S.R. Ghongadi, M.B. Pandit, A.H. Jahagirdar, and D. Scheimann, Prog. Photovolt. Res. Appl. 10, 407 (2002).10.1002/pip.447 ↗
5. J.A. Thornton, D.G. Cornog, R.B. Hall, S.P. Shea, and J.D. Meakin, J. Vac. Sci. Technol. A 2, 307 (1984).10.1116/1.572589 ↗
6. A. Rockett, T.C. Lommasson, L.C.Yang, H. Talieh, P. Campos, and J.A. Thornton, Rec. IEEE Photovoltaic Special Conference, Vol. 20(2) (1988), p. 1505.10.1109/PVSC.1988.105961 ↗
7. F. Karg, V. Probst, H. Harms, J. Rimmasch, W. Riedl, J. Kotschy, J. Holz, R. Treichler, O. Eibl, A. Mitwalsky, and A. Kiendl, Rec. IEEE Photovoltaic Special Conference, Vol. 23 (1993), p. 441.
8. H. Oumous, A. Knowles, M.H. Badawi, M.J. Carter, and R. Hill, Rec. IEEE Photovoltaic Special Conference, Vol. 21(1) (1990), p. 477.10.1109/PVSC.1990.111669 ↗
9. M.E. Beck and M. Cocivera, Thin Solid Films 272, 71 (1996).10.1016/0040-6090(95)06075-8 ↗
10. V.K. Kapur, A. Bansal, P. Le, O. Asensio, and N. Shigeoka, Proc. of the 3rd World Conf. on Photovolt. Energy Conversion (Osaka, 2003), p. 465C.
11. K. Eberspacher, J. Pauls, and Serra, Mater. Res. Soc. Symp. Proc. 668, H2.5.1 (2001).10.1557/PROC-668-H2.5 ↗
12. O. Tober, J. Wienke, M. Winkler, J. Penndorf, and J. Griesche, Mater. Res. Soc. Symp. Proc. 763, 371 (2003).10.1557/PROC-763-B8.16 ↗
13. S.J. Ahn, K.H. Kim, and K.H. Yoon, Curr. Appl. Phys. 8, 766 (2008).10.1016/j.cap.2007.04.037 ↗