journal article·2020-06

Tensile toughening of powder-injection-molded β Ti-Nb-Zr biomaterials by adjusting TiC particle distribution from aligned to dispersed pattern

Peng Xu, Florian Pyczak, Ming Yan, Wolfgang Limberg, Regine Willumeit-Römer, Thomas Ebel

Publisher page

Abstract

Abstract The powder metallurgically produced β titanium alloys have long been plagued by high impurity contamination. One of them is the carbon contamination of binder-based powder technologies that originates from the sintering atmosphere, the debinding process and the starting powders. In general, a normal carbon residual of binder-based powder technologies is capable of incurring the formation of aligned TiCx particles along prior β grain boundaries (GB-TiCx) in most classes of β titanium. Premature intergranular fracture of materials invariably ensues during plastic deformation, which hinders their commercialization in structural applications. A novel toughening strategy by regulating TiCx precipitation evolution and resultantly adjusting particle distribution is suggested. In this study, biotolerant metastable β Ti-Nb-Zr alloys containing 0.05 wt% standard carbon residual and consequently 0.5 vol% in situ synthesized TiCx particles were fabricated via powder injection molding. Synchrotron radiation identified that two separate TiCx precipitation-type reactions occurred at β phase region and α/β region. In a narrow temperature range between these two precipitation reactions, dissolution of carbides is observed just below α/β transus. Yttrium addition can postpone TiCx precipitation. On the basis of those mechanisms, adjusting TiCx particle distribution is proposed for the first time, specifically a combination of yttrium addition (Y) and carbide spheroidization reprecipitation annealing (CSRA). As a result, aligned GB-TiCx particles were adjusted to dispersed intragranular TiCx particles. An apparent toughening effect (≈113% increment reaching ef = 8.3%) was achieved after TiCx redistribution, while non-optimally aligned TiCx pattern seriously limited tensile toughness of materials by two negative crack propagation modes. Here, the mechanisms of TiCx redistribution behavior and its toughening are elucidated systematically.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. The beta titanium alloys10.1007/BF03259693 ↗
2. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
3. Toughness and strength of microstructurally controlled titanium alloys10.2355/isijinternational.31.848 ↗
4. Multifunctional alloys obtained via a dislocation-free plastic deformation mechanism10.1126/science.1081957 ↗
5. Ti based biomaterials, the ultimate choice for orthopaedic implants–a review10.1016/j.pmatsci.2008.06.004 ↗
6. The use of titanium for medical applications in the USA10.1016/0921-5093(96)10243-4 ↗
7. Titanium alloys in total joint replacement—a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
8. Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V10.1016/S0142-9612(97)00235-4 ↗
9. Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium10.1016/S0142-9612(00)00275-1 ↗
10. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
11. Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti–29Nb–13Ta–4.6 Zr10.1016/S0142-9612(03)00069-3 ↗
12. Biocompatibility of β-stabilizing elements of titanium alloys
13. Comparison of metal release from various metallic biomaterials in vitro10.1016/j.biomaterials.2004.02.005 ↗
14. Bone bonding bioactivity of Ti metal and Ti–Zr–Nb–Ta alloys with Ca ions incorporated on their surfaces by simple chemical and heat treatments10.1016/j.actbio.2010.09.026 ↗
15. Phase transformation and mechanical properties of the Ti50Zr30Nb10Ta10 alloy with low modulus and biocompatible10.1016/j.jallcom.2004.08.099 ↗
16. Martensitic transformation, shape memory effect and superelasticity of Ti–Nb binary alloys10.1016/j.actamat.2006.01.019 ↗
17. Deformation-induced ω phase in modified Ti–29Nb–13Ta–4.6 Zr alloy by Cr addition10.1016/j.actbio.2013.04.032 ↗
18. Heaney · 2012
19. Development and design of binder systems for titanium metal injection molding: An overview10.1007/s11661-012-1485-x ↗
20. Ebel · 2015 · 337
21. Powder metallurgy of titanium–past, present, and future10.1080/09506608.2017.1366003 ↗
22. Interstitial elements in titanium powder metallurgy: sources and control10.1179/174329011X13045076771759 ↗
23. Progress in titanium metal powder injection molding10.3390/ma6083641 ↗
24. Metal injection moulding of titanium and titanium alloys: challenges and recent development10.1016/j.powtec.2017.06.053 ↗
25. Atomic radii in crystals10.1063/1.1725697 ↗
26. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys10.1179/1743290114Y.0000000108 ↗
27. Alloys of titanium with carbon, oxygen, and nitrogen10.1007/BF03399142 ↗
28. Effect of interstitial solutes on the strength and ductility of titanium10.1016/0079-6425(81)90001-3 ↗
29. Energetics of interstitial oxygen in β-TiX (X = transition elements) alloys using first principles methods10.1016/j.jallcom.2013.03.140 ↗
30. Processing-structure-property aspects of particulate-and whisker-reinforced titanium matrix composites10.1016/j.compscitech.2007.07.016 ↗
31. Improvement in mechanical strength of low-cost β-type Ti–Mn alloys fabricated by metal injection molding through cold rolling10.1016/j.jallcom.2015.12.200 ↗
32. Reduction of the embrittlement effect of binder contamination in MIM processing of Ti alloys10.1080/00325899.2017.1291085 ↗
33. Impacts of trace carbon on the microstructure of as-sintered biomedical Ti–15Mo alloy and reassessment of the maximum carbon limit10.1016/j.actbio.2013.10.034 ↗
34. Effects of selected metallic and interstitial elements on the microstructure and mechanical properties of beta titanium alloys for orthopedic applications
35. Microstructural assessment of Ti6A14V-TiC metal-matrix composite10.1016/0001-6160(89)90224-1 ↗
36. Evidence for stable stoichiometric Ti2C at the interface in TiC particulate reinforced Ti alloy composites10.1016/S1359-6454(99)00453-X ↗
37. Role of alloying elements in microstructures of beta titanium alloys with carbon additions10.1179/026708303225005999 ↗
38. High temperature neutron diffraction study of the order-disorder transition in TiC1−x10.1016/0001-6160(82)90093-1 ↗
39. Neutron diffraction studies on titanium‐carbon and zirconium‐carbon alloys10.1002/pssb.19670200260 ↗
40. Mechanical Properties of Fine‐Grained Substoichiomebic Titanium Carbide10.1111/j.1151-2916.1983.tb10098.x ↗
41. Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial10.1016/j.jallcom.2015.04.039 ↗
42. Metallurgical and mechanical properties of Ti–24Nb–4Zr–8Sn alloy fabricated by metal injection molding10.1016/j.jallcom.2014.07.168 ↗
43. On the fracture toughness of advanced materials10.1002/adma.200803322 ↗
44. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
45. New titanium alloy feedstock for high performance metal injection molding parts
46. Equal channel angular pressing of metal matrix composites: effect on particle distribution and fracture toughness10.1016/j.actamat.2005.07.010 ↗
47. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements10.1016/S1359-6454(02)00510-4 ↗
48. Mechanical properties of a newly additive manufactured implant material based on Ti-42Nb10.3390/ma11010124 ↗
49. Increased osteoblast functions on undoped and yttrium-doped nanocrystalline hydroxyapatite coatings on titanium10.1016/j.biomaterials.2005.10.041 ↗
50. Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines10.1016/j.actbio.2009.09.024 ↗
51. First-principles studies on alloying and simplified thermodynamic aqueous chemical stability of calcium-, zinc-, aluminum-, yttrium-and iron-doped magnesium alloys10.1016/j.actbio.2009.08.016 ↗
52. Qian · 2015
53. Titanium carbide precipitation in Ti-22Nb alloy fabricated by metal injection moulding10.1179/0032589914Z.000000000153 ↗
54. Effects of Mo addition on the mechanical properties and microstructures of Ti-Mn alloys fabricated by metal injection molding for biomedical applications10.2320/matertrans.M2016286 ↗
55. Metal Injection Moulding of Ti-6Al-4V with Yttrium addition
56. Pearson · 1964
57. Ogden · 1955
58. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
59. Beta Ti alloys with low Young's modulus10.2320/matertrans.45.2776 ↗
60. Phase stability change with Zr content in β-type Ti–Nb alloys10.1016/j.scriptamat.2007.08.003 ↗
61. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
62. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
63. 1992
64. Carbide evolution and its potential reduction methods in Ti-22Nb based alloys prepared by metal injection moulding10.1016/j.matlet.2017.01.145 ↗
65. Microstructural characterization of as-sintered titanium and titanium alloys
66. On variant distribution and coarsening behavior of the α phase in a metastable β titanium alloy10.1016/j.actamat.2016.01.023 ↗
67. Nucleation and variant selection of secondary α plates in a β Ti alloy10.1016/j.actamat.2008.08.016 ↗
68. Microstructure and mechanical behavior of metal injection molded Ti–Nb binary alloys as biomedical material10.1016/j.jmbbm.2013.08.013 ↗
69. In situ scanning electron microscopy observations of tensile deformation in a boron-modified Ti–6Al–4V alloy10.1016/j.scriptamat.2006.05.008 ↗
70. Strengthening behavior of in situ-synthesized (TiC–TiB)/Ti composites by powder metallurgy and hot extrusion10.1016/j.matdes.2016.01.092 ↗
71. Piggott · 2002
72. Load transfer in short fibre reinforced metal matrix composites10.1016/j.actamat.2007.06.003 ↗
73. Ashby · 1971 · 137
74. Deformation of Plastically Non-Homogeneous Alloys
75. Tensile deformation and fracture behaviour of a titanium-alloy metal-matrix composite10.1016/S1359-835X(96)00136-4 ↗
76. Application of fracture mechanics to yielding materials10.1098/rspa.1965.0087 ↗
77. F. Burdekin, M. Dawes, Conf. on Partica Appl. of Fracture Mech, to Press, Vessel Tech, 1971.
78. Notched bar tests, fracture mechanics and the brittle strengths of welded structures
79. Impurity (Fe, Cl, and P)-induced grain boundary and secondary phases in commercially pure titanium (CP-Ti)10.1007/s11661-013-1720-0 ↗
80. Mechanisms of fatigue-crack propagation in ductile and brittle solids10.1023/A:1018655917051 ↗
81. Processing of Ti-15V-3Al-3Sn-3Cr by metal injection moulding
82. Mechanical properties, in vitro corrosion resistance and biocompatibility of metal injection molded Ti-12Mo alloy for dental applications10.1016/j.jmbbm.2018.08.038 ↗
83. Powder injection moulding of low modulus Ti-13Nb-13Zr for implant application
84. Low elastic modulus Ti–17Nb processed by powder injection moulding and post-sintering heat treatments10.1179/0032589914Z.000000000209 ↗
85. Effect of Sintering Conditions on Microstructures and Mechanical Properties of Ti-29Nb-13Ta-4.6 Zr Alloy Fabricated by MIM Process, European Congress and Exhibition on Powder Metallurgy
86. Leyens · 2003