journal article·2022-12

Recent progress in electrospun Al2O3 nanofibers: Component design, structure regulation and performance optimization

Hualei Liu, Xiaoyan Liu, Jianyong Yu, Yi-Tao Liu, Bin Ding

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · ZnO doping and properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Fully transparent nanocomposite coating with an amorphous alumina matrix and exceptional wear and scratch resistance10.1002/adfm.201600213 ↗
2. Dehydrogenation mechanisms of methyl-cyclohexane on γ-Al2O3 supported Pt13: impact of cluster ductility10.1016/j.jcat.2018.12.004 ↗
3. CO and CO2 methanation over Ni catalysts supported on alumina with different crystalline phases10.1007/s11814-017-0257-0 ↗
4. High-surface-area corundum by mechanochemically induced phase transformation of boehmite10.1126/science.aaw9377 ↗
5. Mesostructured forms of the transition phases η- and χ-Al2O310.1002/ange.200802278 ↗
6. Location of the spinel vacancies in γ-Al2O310.1002/anie.201901497 ↗
7. Highly efficient Pt catalyst on newly designed CeO2-ZrO2-Al2O3 support for catalytic removal of pollutants from vehicle exhaust10.1016/j.cej.2021.131855 ↗
8. Beyond ordered materials: understanding catalytic sites on amorphous solids10.1021/acscatal.7b01767 ↗
9. Enhanced metathesis activity and stability of methyltrioxorhenium on a mostly amorphous alumina: role of the local grafting environment10.1021/jacs.8b08630 ↗
10. Highly ductile amorphous oxide at room temperature and high strain rate10.1126/science.aav1254 ↗
11. Propane combustion over Pt/Al2O3 catalysts with different crystalline structures of alumina10.1007/s11814-015-0062-6 ↗
12. Binary γ-Al2O3-α-Ga2O3 as supports of NiW catalysts for hydrocarbon sulfur removal10.1016/j.apcatb.2015.08.028 ↗
13. Mapping the oxygen structure of γ-Al2O3 by high-field solid-state NMR spectroscopy10.1038/s41467-020-17470-4 ↗
14. Amorphous alumina nanoparticles: structure, surface energy, and thermodynamic phase stability10.1021/jp405820g ↗
15. Morphology-controlled synthesis of nanocrystalline η-Al2O3 thin films, powders, microbeads, and nanofibers with tunable pore sizes from preformed oligomeric oxo-hydroxo building blocks10.1021/cm202692q ↗
16. Photocurrents in crystal-amorphous hybrid stannous oxide/alumina binary nanofibers10.1111/jace.16504 ↗
17. Preparation and characterization of Ni/Al2O3 for carbon nanofiber fabrication from CO2 hydrogenation10.1016/j.cattod.2020.06.008 ↗
18. An alumina mat with a nano microstructure prepared by centrifugal spinning method10.1016/j.jnoncrysol.2006.02.068 ↗
19. Biotemplated lightweight γ‑alumina aerogels10.1021/acs.chemmater.7b04800 ↗
20. Fabrication of α-alumina fibers by sol-gel and electrospinning of aluminum nitrate precursor solutions10.1016/j.rinp.2018.11.068 ↗
21. Effect of impregnation solutions on the synthesis of Ni-Cu/Al2O3 catalyst to obtain carbon nanofibers10.1088/2053-1591/aadeb2 ↗
22. Influence of spinning parameters on synthesis of alumina fibres by centrifugal spinning10.1016/j.ceramint.2018.03.239 ↗
23. Promoted electrocatalytic nitrogen fixation in Fe-Ni layered double hydroxide arrays coupled to carbon nanofibers: the role of phosphorus doping10.1002/anie.202005579 ↗
24. Electrospun nanofibers: new concepts, materials, and applications10.1021/acs.accounts.7b00218 ↗
25. Scalable manufacturing and applications of nanofibers10.1016/j.mattod.2019.04.018 ↗
26. Interlocked dual-network and superelastic electrospun fibrous sponges for efficient low-frequency noise absorption10.1002/sstr.202000004 ↗
27. Ultralight and resilient Al2O3 nanotube aerogels with low thermal conductivity10.1111/jace.15301 ↗
28. Preparation of low cost alumina nanofibers via electrospinning of aluminium chloride hydroxide/poly(vinyl alcohol) solution10.1016/j.ceramint.2012.07.062 ↗
29. Homogeneous and flexible mullite nanofibers fabricated by electrospinning through diphasic mullite sol-gel route10.1007/s10853-018-2667-8 ↗
30. Morphology, microstructure and mechanical properties of electrospun alumina nanofibers prepared using different polymer templates: a comparative study10.1016/j.jallcom.2020.154502 ↗
31. Excellent energy storage density and efficiency in blend polymer-based composites by design of core-shell structured inorganic fibers and sandwich structured films10.1016/j.compositesb.2019.107429 ↗
32. Fabrication of electrospun Al2O3 fibers with CaO-SiO2 additive10.1016/j.matlet.2012.09.077 ↗
33. Electrospinning preparation and characterization of alumina nanofibers with high aspect ratio10.1016/j.ceramint.2015.04.157 ↗
34. Novel flexible self-standing Pt/Al2O3 nanofibrous membranes: synthesis and multifunctionality for environmental remediation10.1021/acsami.8b07637 ↗
35. Electrospun alumina fibers doped with ferric and magnesium oxides10.2298/SOS1801077M ↗
36. Fabrication of Co/Al2O3 composite nanofiber via electrospinning with tunable magnetic properties10.1007/s12221-020-1409-0 ↗
37. Studies on electrospun alumina nanofibers for the removal of chromium(VI) and fluoride toxic ions from an aqueous system10.1021/ie301586j ↗
38. Al2O3 Coatings on zinc for anti-corrosion in alkaline solution by electrospinning10.3390/coatings9110692 ↗
39. Nanofibrous alumina structures fabricated using high-yield alternating current electrospinning10.1016/j.ceramint.2016.08.003 ↗
40. Development of Al2O3 electrospun fibers prepared by conventional sintering method or plasma assisted surface calcination10.1016/j.apsusc.2016.11.162 ↗
41. Electrospun mullite nanofibers derived from diphasic mullite sol10.1111/jace.14917 ↗
42. Preparation of continuous alumina nanofibers via electrospinning of PAN/DMF solution10.1016/j.matlet.2012.01.077 ↗
43. Microstructure and elastic modulus of electrospun Al2O3-SiO2-B2O3 composite nanofibers with mullite-type structure prepared at elevated temperatures10.1016/j.jeurceramsoc.2017.08.007 ↗
44. High-energy-density polymer nanocomposites composed of newly structured one-dimensional BaTiO3@Al2O3 nanofibers10.1021/acsami.6b13663 ↗
45. Microstructural differences between electrospun alumina borate nanofibers prepared by solutions with different PVP contents10.1016/j.ceramint.2017.04.163 ↗
46. Fabrication and characterization of electrospun ZrO2/Al2O3 nanofibers10.1016/j.ceramint.2017.08.059 ↗
47. A facile preparation of flexible alumina/carbon composite nanofibers film10.4028/www.scientific.net/JNanoR.35.115 ↗
48. Fabrication of flexible and amphiphobic alumina mats by electrospinning10.1007/s10971-016-4160-7 ↗
49. Electrospinning preparation and microstructure characterization of homogeneous diphasic mullite ceramic nanofibers10.1016/j.ceramint.2020.01.263 ↗
50. Flexible and robust YAG-Al2O3 composite nanofibrous membranes enabled by a hybrid nanocrystalline-amorphous structure10.1016/j.jeurceramsoc.2020.01.056 ↗
51. The synthesis of novel Co-Al2O3 nanofibrous membranes with efficient activation of peroxymonosulfate for bisphenol A degradation10.1039/C8EN00366A ↗
52. Preparation and characterization of Al2O3/SiO2 composite nanofibers by using electrostatic spinning method10.1080/15533174.2015.1137023 ↗
53. Alumina nanofibers obtained from poly(Vinyl Alcohol)/boehmite nanocomposites10.1002/app.33319 ↗
54. Alumina nanofibers obtained via electrospinning of pseudo-boehmite sol/PVP solution10.1007/s10971-014-3276-x ↗
55. Electrospun ceramic fibers: composition, structure and the fate of precursors10.1016/j.apsusc.2007.12.068 ↗
56. Ultra-small sepiolite fiber toughened alumina aerogel with enhanced thermal stability and machinability10.1007/s10934-020-00929-6 ↗
57. Synthesis of a highly dispersed Ni/Al2O3 catalyst with enhanced catalytic performance for CO2 reforming of methane by an electrospinning method10.1016/j.ijhydene.2016.07.151 ↗
58. Al2O3 nanofibers prepared from aluminum Di(sec-butoxide)acetoacetic ester chelate exhibits high surface area and acidity10.1016/j.jcat.2021.11.019 ↗
59. Preparation of flexible ultrafine Al2O3 fiber mats via the solution blowing method10.1016/j.ceramint.2014.08.085 ↗
60. Insulating and robust ceramic nanorod aerogels with high-temperature resistance over 1400 °C10.1021/acsami.1c02501 ↗
61. Tailoring nanoporous-engineered sponge fiber molecular sieves with ternary-nested architecture for precise molecular separation10.1021/acsnano.1c04575 ↗
62. Molecular cage-mediated radial gradient porous sponge nanofiber for selective adsorption of a mustard gas simulant10.1021/acsami.1c09849 ↗
63. Facile construction of hierarchical porous ultrafine alumina fibers (HPAFs) and its application for dye adsorption10.1016/j.micromeso.2020.110544 ↗
64. Fabrication of porous hollow γ-Al2O3 nanofibers by facile electrospinning and its application for water remediation10.1016/j.micromeso.2015.05.026 ↗
65. Electrospinning synthesis of porous Al2O3 nanofibers by pluronic P123 triblock copolymer surfactant and properties of uranium(VI)-sorption10.1016/j.matchemphys.2016.04.017 ↗
66. Insights into the pore-forming effect of polyvinyl butyral (PVB) as the polymer template to synthesize mesoporous alumina nanofibers via electrospinning10.1016/j.ceramint.2019.12.107 ↗
67. Influence of calcination temperature on the surface area of submicron-sized Al2O3 electrospun fibers10.1007/s00339-016-9690-x ↗
68. Core-shell PMIA@PVdF-HFP/Al2O3 nanofiber mats in situ coaxial electrospun on LiFePO4 electrode as matrices for gel electrolytes10.1021/acsami.0c20854 ↗
69. YAG/Al2O3/ZrO2 composite fibers of core-shell structure prepared by electrospinning10.1080/21870764.2021.1936762 ↗
70. Magnetic nanotubes obtained from atomic layer deposition coated electrospun nanofibers10.1116/1.5058706 ↗
71. Enhanced thermal conductivity of carboxyl nitrile butadiene rubber composites with low-cost poly(catechol/polyamine) modified Al2O3 via biomimetic method
72. Electrospinning of silica sub-microtubes mats with platinum nanoparticles for NO catalytic reduction10.1016/j.apcatb.2014.02.047 ↗
73. Unusual hollow Al2O3 nanofibers with loofah-like skins: intriguing catalyst supports for thermal stabilization of Pt nanocrystals10.1021/acsami.7b04196 ↗
74. Preparation of continuous porous alumina nanofibers with hollow structure by single capillary electrospinning10.1016/j.colsurfa.2013.07.023 ↗
75. Continuous hollow alumina gel fibers by direct electrospinning of an alkoxide-based precursor10.1016/j.cej.2007.09.013 ↗
76. Elaboration of porous alumina nanofibers by electrospinning and molecular layer deposition for organic pollutant removal
77. Optimizing sandwich-structured composites based on the structure of the filler and the polymer matrix: toward high energy storage properties10.1039/C9RA06256D ↗
78. Synthesis and formation mechanism of TiO2/Al2O3 nanobelts by electrospinning10.1134/S0036024413090306 ↗
79. Flexible self-supported metal-organic framework mats with exceptionally high porosity for enhanced separation and catalysis10.1039/C7TA08210J ↗
80. Fabrication of flexible α-alumina fibers composed of nanosheets10.1002/ejic.201200292 ↗
81. Self-assembly of perovskite crystals anchored Al2O3-La2O3 nanofibrous membranes with robust flexibility and luminescence
82. Lamellar-like electrospun mesoporous Ti-Al-O nanofibers10.3390/ma12020252 ↗
83. In situ synthesis of biomimetic silica nanofibrous aerogels with temperature-invariant10.1002/anie.202001679 ↗
84. Interweaved cellular structured ceramic nanofibrous aerogels with superior bendability and compressibility10.1002/adfm.202005928 ↗
85. Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality10.1038/ncomms6802 ↗
86. Ultralight and fire-resistant ceramic nanofibrous aerogels with temperature-invariant superelasticity10.1126/sciadv.aas8925 ↗
87. Flexible Al2O3/ZrO2 nanofibrous membranes for thermal insulation10.1039/D1CE01512E ↗
88. Elastic and highly fatigue resistant ZrO2-SiO2 nanofibrous aerogel with low energy dissipation for thermal insulation
89. All-ceramic and elastic aerogels with nanofibrous-granular binary synergistic structure for thermal superinsulation10.1021/acsnano.1c09668 ↗
90. Conductive and elastic TiO2 nanofibrous aerogels: A new concept toward self-supported electrocatalysts with superior activity and durability10.1002/anie.202010110 ↗
91. Pt/TiO2-x nanofibrous aerogel for effective nitrogen reduction: A simple strategy for simultaneous Pt formation and TiO2-x vacancy engineering10.1016/j.cclet.2021.08.069 ↗
92. A facile methodology for the production of in situ inorganic nanowire hydrogels/aerogels10.1021/nl404392j ↗
93. General preparation and shaping of multifunctional nanowire aerogels for pressure-gas-photo-sensing10.1007/s42765-021-00076-w ↗
94. Synthesis of high porosity and high adsorption performance BNNRs aerogels with long straight and their application for water cleaning10.1016/j.diamond.2021.108649 ↗
95. Multifunctional and highly compressive cross-linker-free sponge based on reduced graphene oxide and boron nitride nanosheets10.1016/j.cej.2017.07.115 ↗
96. Instantaneous self-assembly of three-dimensional silica fibers in electrospinning: Insights into fiber deposition behavior10.1016/j.matlet.2017.05.128 ↗
97. Ultralight polypyrrole crosslinked nanofiber aerogel for highly sensitive piezoresistive sensor10.1016/j.cej.2021.131650 ↗
98. Flexible ceramic nanofibrous sponges with hierarchically entangled graphene networks enable noise absorption10.1038/s41467-021-26890-9 ↗
99. Ultralight, thermal insulating, and high-temperature-resistant mullite-based nanofibrous aerogels10.1016/j.cej.2018.12.018 ↗
100. Lightweight and thermally insulating aluminum borate nanofibrous porous ceramics10.1016/j.ceramint.2021.04.104 ↗