journal article·2017-06

Cu-Induced Dielectric Breakdown of Porous Low-Dielectric-Constant Film

Yi-Lung Cheng, Chih-Yen Lee, Yao-Liang Huang, Chung-Ren Sun, Wen-Hsi Lee, Giin-Shan Chen, Jau-Shiung Fang, Bach Thang Phan

Journal of Electronic Materials· Volume 46· Issue 6
Publisher page

Abstract

Dielectric breakdown induced by Cu ion migration in porous low-k dielectric films has been investigated in alternating-polarity bias conditions using a metal–insulator–metal capacitor with Cu top metal electrode. The experimental results indicated that Cu ions migrated into the dielectric film under stress with positive polarity, leading to weaker dielectric strength and shorter time to failure (TTF). In the alternating-polarity test, the measured TTFs increased with decreasing stressing frequency, implying backward migration of Cu ions during reverse-bias stress. Additionally, compared with a direct-current stress condition, the measured TTFs were higher as the frequency was decreased to 10−2 Hz. The electric-field acceleration factor for porous low-k dielectric film breakdown in the alternating-polarity test was also found to increase. This Cu backward migration effect is effective when the stressing time under negative polarity is longer than 0.1 s.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Ferroelectric and Negative Capacitance Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A. Grill, Annu. Rev. Mater. Res. 39, 49 (2009).10.1146/annurev-matsci-082908-145305 ↗
2. C.K. Choi, H.S. Lee, R. Navamathavan, J.K. Woo, and C.Y. Kim, Thin Solid Films 78, 6474 (2010).10.1016/j.tsf.2010.02.050 ↗
3. J. Yuan, C. Ye, Z. Xing, Y. Xu, and Z. Ning, Microelectron. Eng. 86, 2119 (2009).10.1016/j.mee.2009.02.023 ↗
4. F. Chen and M.A. Shinosky, Microelectron. Reliab. 54, 529 (2014).10.1016/j.microrel.2013.12.020 ↗
5. I. Fisher and M. Eizenberg, Thin Solid Films 516, 4111 (2008).10.1016/j.tsf.2007.10.011 ↗
6. B.J. Tang, K. Croes, Y. Barbarin, Y.Q. Wang, R. Degraeve, Y. Li, M. Toledano-Luque, T. Kauerauf, J. Bommels, Zs. Tokei, and I. De Wolf, Microelectron. Reliab. 54, 1675 (2014).10.1016/j.microrel.2014.07.089 ↗
7. F. Chen, O. Bravo, D. Harmon, M. Shinosky, and J. Aitken, Microelectron. Reliab. 48, 1375 (2008).10.1016/j.microrel.2008.06.037 ↗
8. P. Belsky, R. Streiter, H. Wolf, S.E. Schulz, O. Aubel, and T. Gessner, Microelectron. Eng. 92, 107 (2012).10.1016/j.mee.2011.04.070 ↗
9. F. Chen, O. Bravo, K. Chanda, P. Mclaughlin, T. Sullivan, J. Gill, J. Lioyd, R. Kontra, and J. Aitken, in Proceedings of International Reliability Physics Symposium (2006), pp. 46–53.
10. S.Y. Jung, B.J. Kim, N.Y. Lee, B.M. Kim, S.J. Yeom, N.J. Kwak, and Y.C. Joo, Microelectron. Eng. 89, 58 (2012).10.1016/j.mee.2011.01.070 ↗
11. H. Miyazaki, D. Kodama, and N. Suzumura, in Proceedings of International Reliability Physics Symposium (2008), pp. 150–157.
12. K.C. Aw and K. Ibrahim, Thin Solid Films 434, 178 (2003).10.1016/S0040-6090(03)00430-9 ↗
13. B.Y. Tsui, K.L. Fang, and S.D. Lee, IEEE Trans. Electron Dev. 48, 2375 (2001).10.1109/16.954480 ↗
14. H. Cui, I.B. Bhat, S.P. Murarka, H. Lu, W.J. Hsia, and W. Catabay, J. Vac. Sci. Technol. B 20, 1987 (1997).10.1116/1.1503779 ↗
15. J.W. McPherson, Microelectron. Reliab. 52, 1753 (2012).10.1016/j.microrel.2012.06.007 ↗
16. E.T. Ogawa, J. Kim, G.S. Haase, H.C. Mogul, and J.W. McPherson, in Proceedings of International Reliability Physics Symposium (2012), pp. 166–172.