Influence of Ca Substitution on Piezoelectric Properties of Ba1−x Ca x TiO3
Source abstract
Abstract
Ca has been partially substituted for Ba in the structure of BaTiO3 to investigate the influence on its dielectric relaxation time and piezoelectric properties. Ba1−xCaxTiO3 samples with x = 0.120, 0.140, 0.142, 0.144, 0.146, 0.148, 0.150, 0.152, and 0.160 were fabricated by the solid-state reaction method. The phase composition of the samples was identified by x-ray diffraction analysis. The impedance versus frequency characteristic in a range from 100 Hz to 2.5 MHz was measured at room temperature for all samples in both disk and cylinder shape. The results showed that Ca substitution considerably affected the piezoelectric properties of the fabricated samples. The piezoelectric properties were improved and optimized for x = 0.148, for which the relaxation time reached its minimal value. The relationship between the dielectric relaxation time and piezoelectric properties was found to be associated with structural phase competition as identified by high-resolution transmission electron microscopy analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. R.K. Patel, P. Kumar, C. Prakash, and D.K. Agrawal, Ceram. Int. 38, 1585 (2012).10.1016/j.ceramint.2011.09.045 ↗
2. R. Tazaki, D. Fu, M. Itoh, M. Daimon, and S. Koshihara, J. Phys. Condens. Matter 21, 215903 (2009).10.1088/0953-8984/21/21/215903 ↗
3. T. Karaki, S. Maruyama, R. Chikazawa, and M. Adachi, Ferroelectrics 439, 83 (2012).10.1080/00150193.2012.741933 ↗
4. L. Simon-Seveyrat, A. Hajjaji, Y. Emziane, B. Guiffard, and D. Guyomar, Ceram. Int. 33, 35 (2007).10.1016/j.ceramint.2005.07.019 ↗
5. A.V. Polotai, A.V. Ragulya, and C.A. Randall, Ferroelectrics 288, 93 (2003).10.1080/00150190390211972 ↗
6. S. O’Brien, L. Brus, and C.B. Murray, J. Am. Chem. Soc. 123, 12085 (2001).10.1021/ja011414a ↗
7. A.V. Polotai, A.V. Ragulya, T.V. Tomila, and C.A. Randall, Ferroelectrics 298, 243 (2004).10.1080/00150190490423624 ↗
8. C.A. Randall, J. Chem. Soc. Jpn. 109, S2 (2001).
9. M.H. Frey, Z. Xu, P. Han, and D.A. Payne, Ferroelectrics 206, 337 (1998).10.1080/00150199808009168 ↗
10. M. Tanaka and Y. Makino, Ferroelectr. Lett. 24, 13 (1998).10.1080/07315179808204451 ↗
11. D. McCauley, R.E. Newnham, and C.A. Randall, J. Am. Ceram. Soc. 81, 979 (1998).10.1111/j.1151-2916.1998.tb02435.x ↗
12. Y. Fukai, Ferroelectrics 203, 227 (1997).10.1080/00150199708012849 ↗
13. L. Mitoserin, C. Harnagea, P. Nanni, A. Testino, M.T. Buscaglia, V. Buscaglia, M. Viviani, Z. Zhao, and M. Nygren, Appl. Phys. Lett. 84, 2418 (2004).10.1063/1.1695201 ↗
14. N. Ma, B.P. Zhang, W.G. Yang, and D. Guo, J. Eur. Ceram. Soc. 32, 1059 (2012).10.1016/j.jeurceramsoc.2011.11.014 ↗
15. P. Zheng, J.L. Zhang, Y.Q. Tan, and C.L. Wang, Acta Mater. 60, 5022 (2012).10.1016/j.actamat.2012.06.015 ↗
16. S. Shao, J. Zhang, Z. Zhang, P. Zheng, M. Zhao, J. Liand, and C. Wang, J. Phys. D Appl. Phys. 41, 125408 (2008).10.1088/0022-3727/41/12/125408 ↗
17. T. Karaki, K. Yan, T. Miyamoto, and M. Adachi, Jpn. J. Appl. Phys. 46, L97 (2007).10.1143/JJAP.46.L97 ↗
18. H.V. Le, V.Kh. Nguyen, and V.Ch. Truong, Mater. Trans. 56, 1374 (2015).10.2320/matertrans.MA201543 ↗