journal article·2012-06

Development of a Measurement Method for the Thermal Conductivity of a Thick Film Prepared by a Screen-Printing Technique

Ju Hyung We, Heon Bok Lee, Sun Jin Gim, Gyung Soo Kim, Kukjoo Kim, Kyung Cheol Choi, Onejae Sul, Byung Jin Cho

Journal of Electronic Materials· Volume 41· Issue 6
Publisher page

Abstract

We propose a method that allows us to evaluate the thermal conductivity of a conductive material that has thickness on the order of microns. The key feature of the proposed method is use of a complete thermoelectric device with electrodes and a substrate, while conventional methods measure the temperature gradient of thermoelectric materials directly without electrodes. The measured thermal conductivity of a ZnSb film annealed at 380°C in N2 ambient for 16 min to 26 min is 1.2 W/m K to 1.4 W/m K. The measurement shows that thermoelectric film prepared by a screen-printing technique has lower thermal conductivity than bulk material (2.2 W/m K to 2.4 W/m K) because the screen-printing technique generates high porosity in the film. The lower measured thermal conductivity of the porous films compared with bulk material supports the reliability of the proposed measurement method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗
2. J.P. Heremans, V. Jovovic, E.S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, S. Yamanaka, and G.J. Snyder, Science 321, 554 (2008).10.1126/science.1159725 ↗
3. D.M. Rowe and G. Min, J. Power Sources 73, 193 (1998).10.1016/S0378-7753(97)02801-2 ↗
4. J.P. Fleurial, G.J. Snyder, J.A. Herman, P.H. Giauque, W.M. Phillips, M.A. Ryan, P. Shakkottai, E.A. Kolawa, and M.A. Nicolet, Proc. ICT’99 (1999), p. 294.
5. W. Shin, K. Imai, N. Izu, and N. Murayama, Jpn. J. Appl. Phys. 40, 1232 (2001).10.1143/JJAP.40.L1232 ↗
6. H.-B. Lee, H.J. Yang, J.H. We, K. Kim, K.C. Choi, and B.J. Cho, J. Electron. Mater. 40, 615 (2001).10.1007/s11664-010-1481-0 ↗
7. T.C. Harman, J. Appl. Phys. 29, 1373 (1958).10.1063/1.1723445 ↗
8. W.J. Parker, R.J. Jenkins, C.P. Butler, and G.L. Abbott, J. Appl. Phys. 32, 1679 (1961).10.1063/1.1728417 ↗
9. K.E. Goodson, O.W. Kading, M. Rosler, and R. Zachai, J. Appl. Phys. 77, 1385 (1995).10.1063/1.358950 ↗
10. D.G. Cahill and R.O. Pohl, Phys. Rev. B: Condens. Matter. 35, 4067 (1987).10.1103/PhysRevB.35.4067 ↗
11. R.E. Trease and R.L. Dietz, Solid-State Technol. 15, 39 (1972).10.1016/0038-1101(72)90065-2 ↗
12. L.F. Miller, Solid-State Technol. 17, 54 (1974).
13. L.T. Zhang, M. Tsutsui, K. Ito, and M. Yamaguchi, J. Alloys Compd. 358, 252 (2003).10.1016/S0925-8388(03)00074-4 ↗