In Situ Monitoring of Thermally Induced Resistivity Changes in Silver Thin Films
Source abstract
Abstract
This study investigates the evolution of electrical and microstructural properties during thermal treatments of silver thin films deposited by wet chemistry on glass substrates. It aims to provide a link between the observed morphological and crystallographic changes based on in situ monitoring of the electrical resistivity evolution. The resistivity of the silver thin films was found to decrease after thermal treatments performed between 110°C and 250°C. This decrease is explained by the elimination of crystallographic defects, highlighted by the decrease of the full-width at half-maximum (FWHM) of the x-ray diffraction peaks, and by the absence of morphological changes for the same temperature interval. After thermal treatments above 250°C, further changes in FWHM and in resistivity are negligible. However, a change in microstructure appears through the formation of voids. Such void formation combined with the increase in the {111}/{200} ratio in samples annealed at temperatures above 250°C is explained by the onset of agglomera- tion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Theoretical and Computational Physics · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. H.C. Kim, T.L. Alford, and D.R. Allee, Appl. Phys. Lett. 81, 4287–4289 (2002).10.1063/1.1525070 ↗
2. K.S. Gadre and T.L. Alford, J. Appl. Phys. 93, 919–923 (2003).10.1063/1.1530362 ↗
3. M. Hauder, J. Gstöttner, W. Hansch, and D. Schmitt-Landsiedel, Appl. Phys. Lett. 78, 838–840 (2001).10.1063/1.1345801 ↗
4. Y. Zoo, H. Han, and T.L. Alford, J. Appl. Phys. 102, 083548 (2007).10.1063/1.2800998 ↗
5. K. Sivaramakrishnan, A.T. Ngo, S. Iyer, and T.L. Alford, J. Appl. Phys. 105, 063525 (2009).10.1063/1.3100043 ↗
6. H.C. Kim, N.D. Theodore, and T.L. Alford, J. Appl. Phys. 95, 5180–5188 (2004).10.1063/1.1682685 ↗
7. B. Schweig, Mirrors: A Guide to the Manufacture of Mirrors and Reflecting Surfaces (London: Pelham, 1973).
8. J.F. Whitfield, Electrical Craft Principles, Vol. 1, 4th ed. (London: The Institution of Electrical Engineers, 1995), pp. 42–45.
9. L. Gao, P. Härter, Ch Linsmeier, J. Gstöttner, R. Emling, and D. Schmitt-Landsiedel, Mater. Sci. Semicond. Process. 7, 331–335 (2004).10.1016/j.mssp.2004.09.128 ↗
10. A. Niskanen, T. Hatanpää, K. Arstila, M. Leskelä, and M. Ritala, Chem. Vap. Depos. 13, 408–413 (2007).10.1002/cvde.200606519 ↗
11. M. Kariniemi, J. Niinisto, T. Hatanpää, M. Kemel, T. Sajavaara, M. Ritala, and M. Leskelä, Chem. Mater. 23, 2901–2907 (2011).10.1021/cm200402j ↗
12. H.E. Swanson, E. Tatge, Natl. Bur. Stand. (US) Circ., 1, 23 (1953).
13. S. Strehle, J.W. Bartha, and K. Wetzig, Thin Solid Films 517, 3320–3325 (2009).10.1016/j.tsf.2008.11.146 ↗
14. D. Astruc, Nanoparticles and Catalysis (Weinheim: Wiley Online Library, 2008), p. 205.10.1002/9783527621323 ↗
15. C.V. Thompson, Annu. Rev. Mater. Sci. 30, 159–190 (2000).
16. S.K. Sharma and J. Spitz, Thin Solid Films 65, 339–350 (1980).10.1016/0040-6090(80)90244-8 ↗
17. S.K. Sharma and J. Spitz, J. Mater. Sci. Lett. 16, 535–536 (1981).
18. D.J. Srolovitz and M.G. Goldiner, JOM 47, 31–36 (1995).10.1007/BF03221433 ↗
19. L.I. Maissel and R. Glang, Handbook of Thin Film Technology (Maissel, NY: McGraw-Hill, 1970).
20. L.E. Murr, Interfacial Phenomena in Metals and Alloys (Reading, MA: Addison-Wesley, 1975).
21. T.L. Alford, L. Chen, and K.S. Gadre, Thin Solid Films 429, 248–254 (2003).10.1016/S0040-6090(03)00034-8 ↗
22. H. Han, Y. Zoo, J.W. Mayer, and T.L. Alford, J. Appl. Phys. 102, 036101 (2007).10.1063/1.2761822 ↗
23. K. Sugawara, M. Kawamura, Y. Abe, and K. Sasaki, Microelectron. Eng. 84, 2476–2480 (2007).10.1016/j.mee.2007.05.050 ↗
24. K. Sugawara, Y. Minamide, M. Kawamura, Y. Abe, and K. Sasaki, Vaccum 83, 610–613 (2008).10.1016/j.vacuum.2008.04.029 ↗