Structure–Diffusion Relationship of Magnetron-Sputtered WTi Barriers Used in Indium Interconnections
Source abstract
Abstract
Tungsten-titanium (WTi) thin films are known as potential adhesion promoters and diffusion barriers. The barrier efficiency of WTi thin films against indium (In) diffusion was experimentally studied by x-ray diffraction (XRD) measurements during in situ annealing. Specific multilayered samples were designed to estimate the diffusion barrier properties using the Ni/In system. These diffusion samples were made up of a 100-nm-thick WTi layer prepared by magnetron sputtering from an alloyed target (W:Ti ≈ 70:30 at.%), sandwiched between Ni and Au/In layers. WTi film microstructures were observed to depend on the working pressure. Diffusion barrier breakdown was monitored upon annealing by the formation of intermetallic compounds (IMC) (intermixing between Ni and In). Annealing was performed at temperatures of 573 K, 623 K, and 673 K (homologous temperatures \(T/T\rm m\rm In \simeq 1.34, 1.45\), and 1.57, respectively) and under primary vacuum. The diffusion coefficients of In in WTi were determined. The correlation between WTi film microstructure and diffusion barrier efficiency was established. Better diffusion barrier performance was obtained for WTi films with dense microstructure associated with a compressive residual stress state. Hence, tuning the sputtering conditions allows significant improvement of barrier performance against diffusion through a change of the film microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. C.E.T. White and H. Okamoto, Phase Diagrams of Indium Alloys and Their Engineering Applications. Monograph Series on Alloy Phase Diagrams (Utica, NY: Indium Corporation of America, 1992).
2. J.A. Cunningham, C.R. Fuller, and C.T. Haywood, IEEE Trans. Reliab. R-19, 182 (1970).10.1109/TR.1970.5216441 ↗
3. A. Furuya and Y. Ohshita, J. Appl. Phys. 84, 4941 (1998).10.1063/1.368805 ↗
4. S.E. Babcock and K.N. Tu, J. Appl. Phys. 59, 1599 (1986).10.1063/1.336470 ↗
5. S.Q. Wang, S. Suthar, C. Hoeflich, and B.J. Burrow, J. Appl. Phys. 73, 2301 (1993).10.1063/1.353135 ↗
6. J.A. Thornton, Annu. Rev. Mater. Sci. 7, 239 (1977).10.1146/annurev.ms.07.080177.001323 ↗
7. A. Le Priol, E. Le Bourhis, P.-O. Renault, P. Muller, and H. Sik, J. Appl. Phys. 113, 213504 (2013).10.1063/1.4808240 ↗
8. A. Le Priol, L. Simonot, G. Abadias, P. Guérin, P.-O. Renault, and E. Le Bourhis, Surf. Coat. Technol. (2013). doi: 10.1016/j.surfcoat.2013.08.065 .10.1016/j.surfcoat.2013.08.065 ↗
9. C.S. Chen, C.P. Liu, H.G. Yang, and C.Y.A. Tsao, J. Vac. Sci. Technol. B 22, 1075 (2004).10.1116/1.1738669 ↗
10. J.C. Lin and C. Lee, J. Electrochem. Soc. 146, 3466 (1999).10.1149/1.1392497 ↗
11. P. Kansuwan and J.M. Rickman, J. Chem. Phys. 126, 094707 (2007).10.1063/1.2672993 ↗
12. M. Wittmer, J. Vac. Sci. Technol. A 2, 273 (1984).10.1116/1.572580 ↗
13. M. Stavrev, C. Wenzel, A. Möller, and K. Drescher, Appl. Surf. Sci. 91, 257 (1995).10.1016/0169-4332(95)00128-X ↗
14. K.C. Park, K.B. Kim, I.J.M.M. Raaijmakers, and K. Ngan, J. Appl. Phys. 80, 5674 (1996).10.1063/1.363620 ↗
15. A. Gupta, H. Wang, A. Kvit, G. Duscher, and J. Narayan, J. Appl. Phys. 93, 5210 (2003).10.1063/1.1566472 ↗
16. K. Bedu-Amissah, J.M. Rickman, H.M. Chan, and M.P. Harmer, J. Appl. Phys. 98, 063511 (2005).10.1063/1.2043257 ↗
17. G.G. Stoney, Proc. R. Soc. Lond. Ser. A 82, 172 (1909).10.1098/rspa.1909.0021 ↗
18. J.A. Thornton and D.W. Hoffman, J. Vac. Sci. Technol. 14, 164 (1977).10.1116/1.569113 ↗
19. F.M. D’Heurle, Metall. Mater. Trans. B 1, 725 (1970).10.1007/BF02811600 ↗
20. J.A. Floro, E. Chason, R.C. Cammarata, and D.J. Srolovitz, MRS Bull. 27, 19 (2002).10.1557/mrs2002.15 ↗
21. K.H. Muller, J. Appl. Phys. 62, 1796 (1987).10.1063/1.339559 ↗
22. T.J. Vink, W. Walrave, J.L.C. Daams, A.G. Dirks, M.A.J. Somers, and K.J.A. van den Aker, J. Appl. Phys. 74, 988 (1993).10.1063/1.354842 ↗
23. T. Laurila, K. Zeng, J.K. Kivilahti, J. Molarius, and I. Suni, J. Appl. Phys. 88, 3377 (2000).10.1063/1.1288692 ↗
24. V. Simić and Ž. Marinković, Thin. Solid. Films 41, 57 (1977).10.1016/0040-6090(77)90009-8 ↗
25. Y.H. Tseng, M.S. Yeh, and T.H. Chuang, J. Electron. Mater. 28, 105 (1999).10.1007/s11664-999-0226-4 ↗
26. D. Gupta, Diffusion Processes in Advanced Technological Materials (Berlin: Springer, 2005).10.1007/978-3-540-27470-4 ↗
27. Y.J. Park and C.V. Thompson, J. Appl. Phys. 82, 4277 (1997).10.1063/1.366234 ↗