journal article·2010-03

Reflow Phenomenon Analysis of Large Scale Integrated Cu Interconnections in Via Holes by Viscoelastic Deformation Simulation

Takashi Onishi, Masao Mizuno, Tetsuya Yoshikawa, Jun Munemasa, Takao Inoue, Aki Miyagaki, Hisashi Nakamoto, Takayuki Onoda

Journal of Electronic Materials· Volume 39· Issue 3
Publisher page

Abstract

The reflow phenomenon of Cu interconnections deposited over via holes was analyzed by viscoelastic deformation simulation using a finite-element method to clarify the embedding mechanism of Cu interconnections into via holes in a novel dual-damascene fabrication technology, which combined sputter deposition and high-pressure annealing. Cu is considered to be a viscoelastic body, and the stress distribution and deformation behavior of Cu interconnections were calculated. As a result, the deformation behavior of the Cu interconnections exhibited close agreement between the calculated and the observed values. From our series of results, we inferred that Cu interconnections are embedded into via holes by the creep deformation mechanism defined in this study during the high-pressure annealing process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. P. Singer, Semicond. Int. 1997, 67 (1997).
2. P. Gwynne, IBM Research No. 4 1997, 17–22 (1997).
3. A.E. Braun, Semicond. Int. 1999, 58 (1999).
4. B. Li, T.D. Sullivan, T.C. Lee, and D. Badami, Microelectron. Reliab. 44, 365 (2004).10.1016/j.microrel.2003.11.004 ↗
5. K. Abe, Y. Harada, M. Yoshimaru, and H. Onoda, J. Vac. Sci. Technol., B: Microelectron. Nanometer—Process., Meas., Phenom. 22, 721 (2004).10.1116/1.1676618 ↗
6. T.C. Wang, T.E. Hsieh, M.T. Wang, D.S. Su, C.H. Chang, Y.L. Wang, and J.Y. Lee, J. Electrochem. Soc. 152, G45 (2005).10.1149/1.1828419 ↗
7. M.H. Lin, Y.L. Lin, K.P. Chang, K.C. Su, and T. Wang, Jpn. J. Appl. Phys. 45, 700 (2006).10.1143/JJAP.45.700 ↗
8. H. Tsuchikawa, Y. Mizushima, T. Nakamura, T. Suzuki, and H. Nakajima, Jpn. J. Appl. Phys. 45, 714 (2006).10.1143/JJAP.45.714 ↗
9. T. Fujikawa, K. Suzuki, T. Masui, and T. Onishi, Advanced Metallization Conference 1999, ed. M.E. Gross, T. Gessner, N. Kobayashi, and Y. Yasuda (Warrendale, PA: Materials Research Society, 1999), pp. 105–108.
10. K. Suzuki, T. Masui, T. Fujikawa, Y. Taguchi, and T. Kondo, Advanced Metallization Conference 1999, ed. M.E. Gross, T. Gessner, N. Kobayashi, and Y. Yasuda (Warrendale, PA: Materials Research Society, 1999), pp. 155–160.
11. T. Fujikawa, T. Onishi, and T. Sato, Jpn. J. Appl. Phys. 40, 2191 (2001).10.1143/JJAP.40.2191 ↗
12. T. Onishi, H. Fujii, J. Munemasa, and T. Yoshikawa, Advanced Metallization Conference Asian Session 2001, ed. A.J. McKerrow, Y. Shacham-Diamond, S. Zaima, and T. Ohba (Warrendale, PA: Materials Research Society, 2001), pp. 245–250.
13. T. Onishi and T. Yoshikawa, Mater. Trans. 43, 1605 (2002).10.2320/matertrans.43.1605 ↗
14. T. Onishi, H. Fujii, T. Yoshikawa, J. Munemasa, T. Inoue, and A. Miyagaki, Thin Solid Films 425, 265 (2003).10.1016/S0040-6090(02)01120-3 ↗
15. H.J. Frost and M.F. Ashby, Deformation Mechanism Maps (New York: Pergamon Press, 1982), pp. 20–29.
16. M.D. Thouless, J. Gupta, and J.M.E. Harper, J. Mater. Res. 8, 1845 (1993).10.1557/JMR.1993.1845 ↗