journal article·2014-11

Abrasive-Free Chemical Mechanical Polishing of Hard Disk Substrate with Cumene Hydroperoxide-H2O2 Slurry

Ting Jiang, Hong Lei

Journal of Electronic Materials· Volume 43· Issue 11
Publisher page

Abstract

With magnetic heads operating closer to hard disks, the hard disks must be ultra-smooth. The abrasive-free polishing (AFP) performance of cumene hydroperoxide (CHP) as the initiator in H2O2-based slurry for hard disk substrate was investigated in our work, and the results showed that the slurry including CHP could improve the material removal rate (MRR) and also reduce surface roughness. Electron spin-resonance spectroscopy (EPR), electrochemical measurement and Auger electron spectroscopy (AES) were conducted to investigate the acting mechanism with CHP during the polishing process. Compared with the H2O2 slurry, the EPR analysis shows that the CHP–H2O2 slurry provides a higher concentration of the HOO free radical. In addition, the AES analysis shows the oxidization reaction occurs in the external layer of the substrate surface. Furthermore, electrochemical measurements reveal that CHP can promote the electrochemical effect in AFP and lead to the increase of MRR.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S.T.S. Bukkapatnam, P.K. Rao, W.C. Lih, N. Chandrasekaran, and R. Komanduri, J. Appl. Physiol. A88, 785 (2007).
2. W. Zhang, X.C. Lu, Y.H. Liu, G.S. Pan, and J.B. Luo, J. Electrochem. Soc. 156, 176 (2009).
3. H. Lei and J.B. Luo, Wear 257, 461 (2004).10.1016/j.wear.2004.01.017 ↗
4. Z.Q. Qi and W.M. Lee, Tribol. Int. 43, 810 (2010).10.1016/j.triboint.2009.11.007 ↗
5. S. Kondo, N. Sakuma, Y. Homma, Y. Goto, N. Ohashi, H. Yamaguchi, and N. Owada, J. Electrochem. Soc. 147, 3907 (2000).10.1149/1.1393994 ↗
6. T. Okamoto, Y. Sano, K. Tachibana, and B. Van Pho, Jpn. J. Appl. Physiol. 51, 046501 (2012).10.7567/JJAP.51.046501 ↗
7. W. Zhang, X.C. Lu, Y.H. Liu, G.S. Pan, and J.B. Luo, Appl. Surf. Sci. 255, 4114 (2009).10.1016/j.apsusc.2008.10.096 ↗
8. W.T. Zhang and H. Lei, Adv. Mater. Res. 690, 3209 (2013).10.4028/www.scientific.net/AMR.690-693.3209 ↗
9. S.S. Chen, H. Lei, and R.L. Chen, Key Eng. Mater. 562, 691 (2013).10.4028/www.scientific.net/KEM.562-565.691 ↗
10. R. Zhao and H. Lei, Adv. Mater. Res. 690, 3222 (2013).10.4028/www.scientific.net/AMR.690-693.3222 ↗
11. Z.J. Wang and H. Lei, Key Eng. Mater. 562, 91 (2013).10.4028/www.scientific.net/KEM.562-565.91 ↗
12. M. Harlharaputhiran, J. Zhang, S. Ramarajan, J.J. Keleher, Y. Li, and S.V. Babu, J. Electrochem. Soc. 147, 3820 (2000).10.1149/1.1393979 ↗
13. H. Li, H. Lei, and R.L. Chen, Thin Solid Films 520, 6174 (2012).10.1016/j.tsf.2012.05.088 ↗
14. H.J. Liang, Tribol. Int. 38, 235–242 (2005).10.1016/j.triboint.2004.08.006 ↗
15. H. Lei, Chin. J. Inorg. Chem. 25, 206 (2009).
16. G. Lim, J.H. Lee, and J. Kim, et al., Wear 257, 863 (2004).10.1016/j.wear.2004.02.007 ↗
17. Y. Seo, N. Kim, and W. Lee, J. Mater. Lett. 60, 1192 (2006).10.1016/j.matlet.2005.10.113 ↗
18. Y.J. Seo, Microelectron. Eng. 84, 2769 (2007).10.1016/j.mee.2006.09.003 ↗