journal article·2014-12

An Electroless-Ag Reflector Developed for High-Brightness White LEDs

W.C. Liu, T. Y. Chung, Y. H. Chen, C. Y. Hsiao, C. P. Lin, C. Y. Liu

Journal of Electronic Materials· Volume 43· Issue 12
Publisher page

Abstract

This study was conducted to investigate the reflectivity and the reflectivity stability of the electroless (Ag) metallization of reflectors used in high-brightness white GaN light-emitting diode packages. Two main reflector metallization schemes were studied: (1) electroless-Ag/electroless-pure-Pd/electroless-Ni plating and (2) electroless-Ag/electroless-Pd(P)/electroless-Ni plating. The reflectivity achieved using all reflector-metallization schemes was >85% in the visible range. However, in the electroless-Ag/electroless-pure-Pd/electroless-Ni reflector, reflectivity exhibited substantial thermal degradation; this was because of two principal factors: (1) the change in the surface morphology of the electroless-Ag surface grains; and (2) the alloying effect on the Ag layer exerted by the interdiffusion occurring with the underlying Pd layer. In this study, P was added to the Pd layer, and the thermal degradation of the annealed electroless-Ag/electroless-Pd(P)/electroless-Ni reflector was measured to be less than that of the electroless-Ag/electroless-pure-Pd/electroless-Ni reflector. The P content retarded the interdiffusion between the Ag and Pd(P) layers and preserved the faceted surface of the electroless-Ag layer, which enhanced the stability of the reflectivity of the electroless-Ag reflector. Furthermore, increasing the thickness of the electroless-Ag layer reduced the amount of Pd diffusing through the Ag layer, which helped retain the reflectivity of the Ag surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. J.K. Kim, H. Luo, E.F. Schubert, J. Cho, C. Sone, and Y. Park, Jpn. J. Appl. Phys. 44, L649 (2005).10.1143/JJAP.44.L649 ↗
2. H. Honma, Electrochim. Acta 47, 75 (2001).10.1016/S0013-4686(01)00591-6 ↗
3. P. Snugovsky, P. Arrowsmith, and M. Romansky, J. Electron. Mater. 30, 1262 (2001).10.1007/s11664-001-0159-z ↗
4. K. Zeng, R. Stierman, D. Abbott, and M. Murtuza, JOM 58, 75 (2006).10.1007/s11837-006-0187-5 ↗
5. K. Suganuma and K.S. Kim, JOM 60, 61 (2008).10.1007/s11837-008-0074-3 ↗
6. T.T. Mattila and K.J. Kivilahti, J. Electron. Mater 34, 969 (2005).10.1007/s11664-005-0084-7 ↗
7. B.K. Kim, S.J. Lee, J.Y. Kim, K.Y. Ji, Y.J. Yoon, M.Y. Kim, S.H. Park, and J.S. Yoo, J. Electron. Mater. 37, 527 (2008).10.1007/s11664-007-0360-9 ↗
8. A.J.G. Strandjord, S. Popelar, and C. Jauernig, Microelectron. Reliab. 42, 265 (2002).10.1016/S0026-2714(01)00236-0 ↗
9. C.T. Lu, H.W. Tseng, C.H. Chang, T.S. Huang, and C.Y. Liu, Appl. Phys. Lett. 96, 232103 (2010).10.1063/1.3449119 ↗