Effect of annealing on the morphology and optoelectrical characteristics of ZnO thin films grown by plasma-assisted molecular beam epitaxy
Source abstract
Abstract
The dependence of characteristics of plasma-assisted molecular beam epitaxy-grown ZnO thin films on different postgrowth annealing conditions was investigated. It was found that, under oxygen atmosphere, annealing temperature can profoundly affect the morphological, electrical, and optical properties of ZnO thin films. In particular, the surface morphology changed from a relatively smooth surface before annealing to various island morphologies after annealing above 800°C for samples grown directly on sapphire without a buffer layer. It is speculated that intrinsic stress due to lattice mismatch drives the island formation and the high temperature provides the energy needed for this surface rearrangement. Single-field Hall-effect measurement showed that the carrier concentration improved by an order of magnitude and the mobility increased from about 30 cm2/Vs to ∼70 cm2/Vs by annealing at 750°C. Variable-field Hall effect shows that a model with two carriers, one a degenerate low-mobility electron and the other a higher mobility non-degenerate electron, is needed to explain the transport properties of the thin film. Analysis indicates that annealing at 750°C decreased the carrier concentration and increased the mobility for the high-mobility carrier. Annealing also led to a significant improvement in photoluminescence, with temperatures of ∼750–850°C yielding the best results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. D.M. Bagnall, Y.F. Chen, Z. Zhu, T. Yao, S. Koyama, M.Y. Shen, and T. Goto, Appl. Phys. Lett. 70, 2230 (1997).10.1063/1.118824 ↗
2. D.M. Bagnall, Y.F. Chen, Z. Zhu, T. Yao, M.Y. Shen, and T. Goto, Appl. Phys. Lett. 73, 1038 (1998).10.1063/1.122077 ↗
3. M. Huang et al., Science 292, 5523 (2001).10.1126/science.1060367 ↗
4. B. Yao, Y. Chan, and N. Wang, Appl. Phys. Lett. 81, 757 (2002).10.1063/1.1495878 ↗
5. A. Tsukazaki et al., Nat. Mater. 4, 42 (2005).10.1038/nmat1284 ↗
6. H.W. Kim and N.H. Kim, Mater. Sci.Semicond. Process. 7, 1 (2004).10.1016/j.mssp.2003.12.001 ↗
7. R. Hong, J. Huang, H. He, Z. Fan, and J. Shao, Appl. Surf. Sci. 242, 346 (2005).10.1016/j.apsusc.2004.08.037 ↗
8. K. Ogata, K. Sakurai, S.Z. Fujita, S. Fujita, and K. Matsushige, J. Cryst. Growth 214/215, 312 (2000).10.1016/S0022-0248(00)00099-3 ↗
9. C. Morhain et al., Phys. Status Solidi (b) 241, 631 (2004).10.1002/pssb.200304284 ↗
10. J. Lim, K. Shin, H.W. Kim, and C. Lee, Mater. Sci. Enb. B 107, 301 (2004).10.1016/j.mseb.2003.12.006 ↗
11. H. Ko, M. Han, Y. Park, Y. Yu, B. Kim, S. Kim, and J. Kim, J. Cryst. Growth 269, 493 (2004).10.1016/j.jcrysgro.2004.05.096 ↗
12. A. Setiawan, H.J. Ko, and T. Yao, Mater. Sci. Semicond. Process. 6, 371 (2003).10.1016/j.mssp.2003.05.002 ↗
13. C. Swartz, R. Tompkins, T. Myers, D. Look, and J. Sizelove, J. Electron. Mater. 33, 412 (2004).10.1007/s11664-004-0193-8 ↗
14. B. Meyer et al., Phys. Status Solidi (b) 241, 231 (2004).10.1002/pssb.200301962 ↗
15. Y.S. Jung, O. Kononenko, J. Kim, and W. Choi, J. Cryst. Growth 274, 418 (2005).10.1016/j.jcrysgro.2004.10.016 ↗
16. H. Lu, W. Schaff, L. Eastman, and C. Stutz, Appl. Phys. Lett. 82, 1736 (2003).10.1063/1.1562340 ↗
17. U. Ozgur, Y. Alivov, C. Liu, A. Teke, M. Reshchikov, S. Dogan, V. Avrutin, S. Cho, and H. Morkoc, J. Appl. Phys. 98, 041301 (2005).10.1063/1.1992666 ↗