journal article·2004-06

Wafer bonding of (211) Cd0.96Zn0.04Te on (001) silicon

C. Miclaus, G. Malouf, S. M. Johnson, D. R. Rhiger, M. S. Goorsky

Journal of Electronic Materials· Volume 33· Issue 6
Publisher page

Abstract

We have successfully bonded (211) cadmium zinc telluride (CZT) substrates onto (001) Si substrates for subsequent epitaxial-layer deposition of mercury cadmium telluride device layers. Silicon-nitride intermediate layers were employed as they provide both low surface roughness, which is necessary for bonding, and low absorption in the 1–10-µm range. Prior to bonding, the SiN layers were activated using oxygen plasma. Transmission infrared (IR) imaging showed >70% bonded area of a 10 mm×10 mm CdZnTe substrate onto a Si substrate. After the initial bond, the structure was exposed to a low-temperature anneal (150°C) for extended periods of time (22 h) to increase the bond strength. This process was sufficient to produce a CdZnTe on silicon structure that was able to withstand subsequent chemical-mechanical polishing (CMP) of the CZT substrate. We also investigated CMP of the transferred CdZnTe to improve the surface for subsequent epitaxial deposition. A Br/ethylene glycol/methanol solution produced the lowest damage levels, as determined by triple axis x-ray diffraction (TAD) while a standard silica/NaOH treatment produced a surface with <0.5-nm root mean square (RMS) roughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Semiconductor Quantum Structures and Devices · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A.J. Auberton-Herve, T. Barge, F. Metral, and M. Bruel, Proc. 8th Int. Symp. on Silicon Materials Science and Technology (Pennington, NJ: Electrochemical Society, 1998), pp. 1341–1360.
2. T. Yohehara and K. Sakaguchi, Jsap. Int. 4, 10 (2001).
3. T.J. de Lyon et al., J. Electron. Mater. 27, 550 (1998).10.1007/s11664-998-0014-6 ↗
4. H. Shtrikman, M. Oron, A. Raizman, and G. Cinader, J. Electron. Mater. 17, 105 (1988).10.1007/BF02652138 ↗
5. R. Sporken, S. Sivananthan, K.K. Mahavadi, G. Monfroy, M. Boukerche, and J.P. Faurie, Appl. Phys. Lett. 55, 1879 (1989).10.1063/1.102159 ↗
6. S. Rujirawat, P.S. Wijewarnasuriya, Y.P. Chen, and F. Aqariden, Mater. Res. Soc. Symp. Proc. 450, 281 (1997).10.1557/PROC-450-281 ↗
7. T.J. de Lyon, J.E. Jensen, M.D. Gorwitz, C.A. Cockrum, S.M. Johnson, and G.M. Venzor, J. Electron. Mater. 28, 705 (1999).10.1007/s11664-999-0058-2 ↗
8. Specification list, Nikko Materials, Chandler, AZ, http://www.nikkomaterials.com
9. S. Hayashi, D. Bruno, R. Sandhu, and M.S. Goorsky, J. Electron. Mater. 32, 877 (2003).10.1007/s11664-003-0204-1 ↗
10. M. Bruel, B. Aspar, and A.J. Auberton-Herve, Jpn. J. Appl. Phys. Part 1 36, 1636 (1997).10.1143/JJAP.36.1636 ↗
11. S.W. Bedell and W.A. Lanford, J. Appl. Phys. 90, 1138 (2001).10.1063/1.1380409 ↗
12. S.L. Riedinger, D.W. Snyder, E.I. Ko, and P.J. Sides, Mater. Sci. Eng. B15, L9 (1992).10.1016/0921-5107(92)90056-F ↗
13. K. Bowen and B. Tanner, High Resolution X-Ray Diffractometry Topography (London: Taylor and Francis, 1998), pp. 18–19.10.1201/b12575 ↗
14. S. Hayashi, D. Bruno, R. Sandhu, and M.S. Goorsky, J. Phys. D. Appl. Phys. 36, A236 (2003).10.1088/0022-3727/36/10A/349 ↗
15. K. Williams, private communication (2003).
16. V. Dragoi, P. Lindner, S. Farrens, and C. Schaefer, European Semi. 25, 31 (2003).