Thermomechanical effects in embedded passive materials
Source abstract
Abstract
Thermomechanical fatigue was measured using electron-beam moire (EBM) and infrared (IR) microscopy. A specimen was made using a FR-4 printed wiring board (PWB), a silver-filled conductive adhesive, and a carbon-filled conductive paste. Both filled polymeric materials are used for embedded resistor applications. We studied the behavior of these materials and, particularly, the interfaces between these materials as a function of thermal cycling. The EBM gives quantitative information on localized strains, whereas the IR microscopy gives quantitative information on changes in heat flow. The filled polymeric materials showed strains of −0.6% at −55°C and 1.4% at 125°C. The interface between the silver and carbon-filled materials increased in thermal resistance on the order of 10−6 m2·K·W−1 per thermal cycle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal properties of materials · Thermography and Photoacoustic Techniques · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. 2000 NEMI Roadmap (Herndon, VA: National Electronics Manufacturing Initiative, Inc. 2000), p. 1.
2. D. Lu, C.P. Wong, and Q.K. Tong, Proc. 49th Electronic Components and Technology Conf. (1999), p. 342.
3. Q.K. Tong, D.L. Markley, G. Fredrickson, R. Kuder, and D. Lu, Proc. 49th Electronic Components and Technology Conf. (June 1999), p. 347.
4. A.Y. Xiao, Q.K. Tong, and A.C. Savoca, Proc. 49th Electronic Components and Technology Conf. (1999), p. 88.
5. E.S. Drexler, Mater. Res. Soc. Symp. Proc. 563, 9 (1999).10.1557/PROC-563-9 ↗
6. E.S. Drexler, Proc. 1999 Int. Electronics Manufacturing Technology Symp. (1999), p. 239.
7. E.S. Drexler, J. Electron. Mater. 28, 1150 (1999).10.1007/s11664-999-0150-7 ↗
8. A.J. Slifka, J. Res. Nat. Inst. Stand. Technol. 105, 591 (2000).10.6028/jres.105.050 ↗
9. E.S. Drexler, NIST Tech. Note 1500-2, (1998).
10. E.S. Drexler, NIST Tech. Note 1500-5, (1998).
11. K. Azar and J.E. Graebner, Proc. 12th Annual IEEE Semiconductor Thermal Measurement and Management Symp. (Piscataway, NJ: IEEE, 1996), p. 169.
12. B.J. Filla, Rev. Sci. Instrum. 68, 2822 (1997).10.1063/1.1148202 ↗