Thermal and mechanical separations of silicon layers from hydrogen pattern-implanted wafers
Source abstract
Abstract
A silicon layer was successfully transferred from a hydrogen pattern-implanted wafer to another by a thermal or mechanical cleavage process. The first wafer was masked with various patterns of 2.3 micron-thick poly-silicon, and was implanted at a hydrogen dose of 4,5, or 8 1016 cm−2 with an energy of 150 keV or 180 KeV. After etching off the implantation mask, the wafer was bonded to a thermally grown oxide wafer face-to-face by low-temperature direct bonding. The bonded pair was then either heated (thermally) or bent (mechanically) until hydrogen-induced silicon layer cleavage occurred, resulting in the silicon layer transfer from the implanted wafer to the other. In this experiment, it was demonstrated that mechanical cleavage can overcome the fractional implantation area limination of thermal cleavage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and devices · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. B.H. Lee, G.J. Bae, K.W. Lee, G. Cha, W.D. Kim, S.I. Lee, T. Barge, A.J. Auberton-Herve, and J.M. Lamure,1996 IEEE Int. SOI Conf. Proc., 114 (1996).
2. B.E. Roberds, E.J. Whang, A. Rudolph, and B.S. Doyle,1998 IEEE Int. SOI Conf. Proc., 109 (1998).
3. C.H. Yun, D. Park, Y.K. Choi, and N.W. Cheung,Proc. 13th Int. Conf. Ion Implantation Technology, in press (2000).
4. C.H. Yun, A.B. Wengrow, N.W. Cheung, Y. Zheng, R.J. Welty, Z.F. Guan, K.V. Smith, P.M. Asbeck, E.T. Yu, and S.S. Lau,Appl. Phys. Lett. 73, 2772 (1998).10.1063/1.122586 ↗
5. C.H. Yun and N.W. Cheung,1999 IEEE Int. SOI Conf. Proc., 129 (1999).
6. S.N. Farrens, J.R. Dekker, J.K. Smith, and B.E. Roberds,J. Electrochem. Soc. 142, 3949 (1995).10.1149/1.2048440 ↗
7. P. Amirfeiz, S. Bengtsson, M. Bergh, E. Zanghellini, and L. Börjesson,J. Electrochem. Soc. 147, 2693 (2000).10.1149/1.1393591 ↗
8. C.D. Beachem,Fracture: An Advanced Treatise I, ed. H. Liebowitz (New York: Academic, 1968), p. 243.
9. G. Michot,Cryst. Prop. Prep. 17–18, 55 (1988).
10. J.A. Hauch, “Dynamic Fracture in Brittle Materials” (Ph.D. dissertation, University of Texas at Austin, 1998), p. 105.
11. Q.Y. Tong, T.H. Lee, K. Gutjahr, S. Hopfe, and U. Gösele,Appl. Phys. Lett. 70, 1390 (1997).10.1063/1.118586 ↗
12. M.K. Weldon, V.E. Marsico, Y.J. Chabal, A. Agarwal, D.J. Eaglesham, J. Sapjeta, W.L. Brown, D.C. Jacobson, Y. Caudano, S.B. Christman, and E.E. Chaban,J. Vac. Sci. Technol. B 15, 1065 (1997).10.1116/1.589416 ↗
13. M. Bruel,Mater Res. Innovat. 3, 9 (1999).10.1007/s100190050119 ↗
14. R.W. Hertzberg,Deformational and Fracture Mechanics of Engineering Materials (New York: Wiley, 1996), p. 273.
15. W.G. En, I.J. Malik, M.A. Bryan, S. Farrens, F.J. Henley, N.W. Cheung, and C. Chan,1998 IEEE Int. SOI Conf. Proc., 163 (1998).
16. K. Henttinen, I. Suni, and S.S. Lau,Appl. Phys. Lett. 76, 2370 (2000).10.1063/1.126349 ↗