journal article·2009-11

Wetting Properties and Interfacial Reactions of Mechanically Alloyed Cu5Zn8-Bearing Pb-Free Solders on a Copper Substrate

Inyu Jung, Moon Gi Cho, Hyuck Mo Lee

Journal of Electronic Materials· Volume 38· Issue 11
Publisher page

Abstract

For enhanced wetting properties of Zn-doped solder alloys, this paper proposes Cu 5 Zn 8 -bearing solders. A mechanical alloying process with controlled milling time and rotational speed was used to successfully fabricate Cu 5 Zn 8 -bearing powders with a diameter of 50 μm to 70 μm. Their composition was identified by inductively coupled plasma atomic emission spectroscopy. After the powders were made into a paste with a rosin-activated type of flux, the wetting angles of the Cu 5 Zn 8 -bearing paste solders on a Cu substrate were compared with the wetting angles of bulk solder alloys with the same amount of Cu and Zn alloying elements. The reason for the enhanced wetting properties of Cu 5 Zn 8 -bearing solders is explained by thermodynamic calculations and differential scanning calorimetry experiments. In addition, the interfacial reactions and the shear strength with Cu substrates are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. W.K. Choi, J.H. Kim, S.W. Jeong, and H.M. Lee, J. Mater. Res. 17, 43 (2002).10.1557/JMR.2002.0009 ↗
2. S.-K. Seo, S.K. Kang, D.-Y. Shih, and H.M. Lee, J. Electron. Mater. 38, 257 (2008).10.1007/s11664-008-0545-x ↗
3. J. Bath, C. Handwerker, and E. Bradley, Circ. Assemb. 11, 31 (2000).
4. S.K. Kang, W.K. Choi, M.J. Yim, and D.-Y. Shih, J. Electron. Mater. 31, 1292 (2002).10.1007/s11664-002-0023-9 ↗
5. M.G. Cho, S.-K. Seo, and H.M. Lee, J. Alloy Compd. 474, 510 (2009).10.1016/j.jallcom.2008.06.141 ↗
6. S.W. Jeong, J.H. Kim, and H.M. Lee, J. Electron. Mater. 35, 1530 (2004).10.1007/s11664-004-0095-9 ↗
7. I. de Sousa, D.W. Henderson, L. Patry, S.K. Kang, and D.-Y. Shih, Proceedings of 56th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2006), pp.␣1454–1461.
8. M.G. Cho, S.K. Kang, D.-Y. Shih, and H.M. Lee, J. Electron. Mater. 36, 1501 (2007).10.1007/s11664-007-0254-x ↗
9. I.E. Anderson, J. Mater. Sci Mater. Electron. 18, 55 (2007).10.1007/s10854-006-9011-9 ↗
10. D.H. Kim, M.G. Cho, S.-K. Seo, and H.M. Lee, J. Electron. Mater. 38, 39 (2009).10.1007/s11664-008-0529-x ↗
11. W.K. Choi, S.W. Yoon, and H.M. Lee, Mater. Trans. 42, 783 (2001).10.2320/matertrans.42.783 ↗
12. K.S. Kim, S.H. Huh, and K. Suganuma, Microelectron. Reliab. 43, 259 (2002).10.1016/S0026-2714(02)00239-1 ↗
13. H. Wang, F. Wang, F. Gao, X. Ma, and Y. Qian, J. Alloy Comp. 433, 302 (2007).10.1016/j.jallcom.2006.06.076 ↗
14. D.Q. Yu, H.P. Xie, and L. Wang, J. Alloy Comp. 385, 119 (2004).10.1016/j.jallcom.2004.04.129 ↗
15. H.-Y. Lee and J.-G. Duh, J. Electron. Mater. 35, 494 (2006).10.1007/BF02690537 ↗
16. C.M.S. Wu, M.L. Huang, J.K.L. Lai, and Y.C. Chan, J.␣Electon. Mater. 29, 1015 (2000).10.1007/s11664-000-0166-5 ↗
17. S.-T. Kao and J.-G. Duh, J. Electron. Mater. 33, 1445 (2004).10.1007/s11664-004-0085-y ↗
18. B. Sundman, B. Jansson, and J.O. Andersson, CALPHAD 9, 153 (1985).10.1016/0364-5916(85)90021-5 ↗
19. T. Jantzen and P.J. Spencer, CALPHAD 22, 417 (1998).10.1016/S0364-5916(98)00040-6 ↗
20. S.-W. Chen and C.-C. Huang, Chem. Eng. Sci. 50, 417 (1995).10.1016/0009-2509(94)00244-L ↗
21. S.-W. Chen, C.-C. Lin, and C.-M. Chen, Metall. Mater. Trans. A 29, 1965 (1998).10.1007/s11661-998-0022-4 ↗