journal article·2007-02-08

Characteristics of the Interfacial Microstructure of Chip-on-Plastic Joints under Thermal Cycling and Aging Treatment

Zhi Gang Chen, Young-Ho Kim

Journal of Electronic Materials· Volume 36· Issue 1
Publisher page

Abstract

This study presents the change of contact resistance and microstructure evolution of chip-on-plastic (COP) joints during the thermal cycling (T/C) test and aging treatment. Results showed that the average contact resistance of COP joints decreased in the early stage of the T/C test as well as during aging treatment. It was observed that after 1,000 h of aging, the (Cu, Au)3Sn phase was completely consumed and transformed into (Cu, Au)6Sn5. The dependence of the growth of interfacial intermetallic compounds (IMCs) on the time of T/C and aging was investigated. The IMC growth had parabolic kinetics with time. The time exponent n under the condition of T/C was approximately 0.5, which indicated that the IMC growth was diffusion controlled. However, the fitting results on the aging treatment showed that n was only about 0.37. The reason for this finding is considered to be due to the fact that after 250 h, the Cu in some areas was depleted; thus, the diffusion in these areas was restrained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Joshi R. (1998) Microelectron J 29:34310.1016/S0026-2692(97)00071-2 ↗
2. Lee C., Yeo A. (2003) Electronic Packaging and Technology Conf. Piscataway, NJ IEEE, pp. 369–375
3. Yim M.J., Paik K.W. (1998) IEEE Trans Comp Packaging Manufacturing Technol Part A 21:22610.1109/95.705468 ↗
4. Teh L.K., Wong C.C., Mhaisalkar S., Ong K., Teo P.S., Wong E.H. (2004) J. Electron. Mater. 33:27110.1007/s11664-004-0132-8 ↗
5. Teh L.K., Anto E., Wong C.C., Mhaisalkar S.G., Wong E.H., Teo P.S., Chen Z. (2004) Thin Solid Films 462–463:44610.1016/j.tsf.2004.05.077 ↗
6. So Alex C.K., Chan Y.C. (1996) Electronic Components and Technology Conf. Piscataway, NJ IEEE, pp. 1164–1171
7. Ma X., Wang F.J., Qian Y.Y., Yoshida F. (2003) Mater. Lett. 57:336110.1016/S0167-577X(03)00075-2 ↗
8. Lee H.-T., Chen M.-H. (2002) Mater. Sci. Eng. A333:24
9. Zakel E., Villian J., Reichl H. (1996) IEEE Trans. Comp. Packaging Manufacturing Technol. Part B 19:13810.1109/96.486496 ↗
10. Mei Z., Ahmad M., Hu M., Ramakrishna G. (2005) Electronic Components and Technology Conf. Piscataway, NJ IEEE, pp. 415–420
11. Zeng K.J., Stierman R., Chiu T.-C., Edwards D. (2005) J. Appl. Phys. 97:2450810.1063/1.1839637 ↗
12. E. Zakel, G. Azdasht, and H. Reichl, Int. Electronic Manufacturing Technology Symp. (1993), pp. 322–32910.1109/IEMT.1993.639790 ↗
13. Zakel E., Reichil H. (1992) Electronic Components and Technology Conf. Piscataway, NJ IEEE, pp. 360–371
14. Pang H.L.J., Tan K.H., Shi X.Q., Wang Z.P. (2001) Mater. Sci. Eng. Part A 307:4210.1016/S0921-5093(00)01958-4 ↗
15. Xu L., Pang J.H.L., Prakash K.H., Low T.H. (2005) IEEE Trans. Comp. Packaging Technol. 28:40810.1109/TCAPT.2005.853593 ↗
16. Kristiansen H., Liu J. (1998) IEEE Trans. Comp., Packaging Manufacturing Technol. Part A 21:20810.1109/95.705466 ↗
17. Lee R.E. (1993) Scanning Electron Microscopy and X-ray Microanalysis. Englewood Cliffs, NJ Prentice-Hall, pp. 6
18. C.E. Birchenall, Physical Metallurgy (New York: McGraw-Hill, 1959), p. 216
19. Klein Wassink R.J. (1989) Soldering in Electronics. Ayr, Scotland Electrochemical Pub. Ltd., pp. 149
20. Pratt R.E., Stromswold E.I., Quesnel D. (1996) IEEE Trans. Comp., Packaging, Manufacturing Technol. Part A 19:13410.1109/95.486625 ↗
21. Grivas D., Frear D., Quan L., Morris Jr. J.W. (1986) J. Electron. Mater. 15:35510.1007/BF02661885 ↗
22. Lee S.H., Roh H.R., Chen Z.G., Kim Y.H. (2005) J. Electron. Mater. 34:446
23. Fields R.J., Low S.R., Lucey Jr. G.K. (1992) Metal Science Joining. Warrendale, PA TMS, pp. 165–173