TCAD simulation of ion implantation test for controlling quality of GaAs substrates used for fabricating implanted devices
Source abstract
Abstract
The quality of GaAs substrate material for manufacturing ion implanted devices is routinely determined by an ion implantation test. The test involves measuring an electrical quantity, such as sheet resistance, after implanting Si into the substrate. This work employs GaAs TCAD simulation to address the range of validity of the implantation test and the pitfalls associated with it. The results show that the electrical measurements are capable of discerning typical variation in the carbon concentration in the substrate. But, the surface or interface charge on GaAs, which may result from processing involved in wafer preparation, is also important. Therefore, while the implantation test in most cases is adequate to control the quality of the substrate, the test is susceptible to misinterpretation owing to the variations arising from the process involved in wafer preparation for the test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. SEMI M14-89, 199 (1995).
2. P.F. Golden, Semi-Insulating III-V Materials, ed. A.G. Milnes and C.J. Miner, (London: IOP, 1990), p. 373.
3. M.R. Brozel, J. De Physique IV, Colloque C1, supplement au J. De. Physique III 5, 63 (1995).
4. F. Orito, K. Watanabe, Y. Yamada, O. Yamamoto, and F. Yajima, GaAs IC Symp. Proc. (Piscataway, NJ: IEEE, 1990), p. 321.
5. E.R. Weber and M. Kaminska, Semi-Insulating III-V Materials, ed. G. Grossmann and L. Ledebo, (London: IOP, 1988), p. 111.
6. D.E. Holmes, R.T. Chen, K.R. Elliot, C.G. Kirkpatrick, and P.W. Yu, IEEE Trans. Microwave Theory and Tech. MTT-30, 949 (1982).10.1109/TMTT.1982.1131182 ↗
7. R.C. Newman, Semicond. Sci. Technol. 9, 1749 (1994).10.1088/0268-1242/9/10/001 ↗
8. M. Ichimura, A. Usami, and T. Wada, Modelling Simul. Mater. Sci. Eng. 1, 529 (1993).10.1088/0965-0393/1/4/014 ↗
9. G.M. Blom and J.M. Woodall, J. Electron. Mater. 17 391 (1988).10.1007/BF02652124 ↗
10. R.K. Willardson, Semi-Insulating III-V Materials, ed. D.C. Look and J.S. Blakemore (London: IOP, 1984), p. 96.
11. M.D. Deal, S.E. Hansen, and T.W. Sigmon, IEEE Trans. on Computer Aided Design 8, 939 (1989).10.1109/43.35546 ↗
12. FLASH Module, ATHENA User’s Manual (Santa Clara, CA: Silvaco Internationa, April 1997).
13. R. Anholt and T.W. Sigmon, IEEE Trans. on Computer Aided Design 8, 350 (1989).10.1109/43.29589 ↗
14. R. Anholt, GATES Background Book, (Minneapolis, MN: Gateway Modelling Inc.), p. 11.
15. R. Anholt, P. Balasingam, S.Y. Chou, T.W. Sigmon, and M. Deal, J. Appl. Phys. 64, 3429 (1988).10.1063/1.341475 ↗
16. J.Y.F. Tang and J.L. Freeouf, J. Vac. Sci. Tech. B 2, 459 (1984).10.1116/1.582895 ↗
17. K. Horio and Y. Fuseya, IEEE Trans. Elect. Devices 41, 1340 (1994).10.1109/16.297727 ↗
18. ATLAS User’s Manual (Santa Clara, CA: Silvaco International, April 1997).
19. S.M. Sze, Phys. of Semicond. Dev (New York: John Wiley, 1981), p. 29.
20. Deepak and N. Lakshminarayana (Paper presented at the Tenth Int. Conf. on Rapidly Quenched and Metastable Materials, Bangalore, India, 23–27 August 1999).
21. R. Anholt and T.W. Sigmon, J. Electron. Mater. 17, 5 (1987).10.1007/BF02652224 ↗
22. R. Anholt (Paper presented at the MANTECH Symp., 1988); also in GATES Background Book (Minneapolis, MN: Gateway Modelling Inc.), p. 8.
23. S.K. Brierley, T.E. Anderson, and A.K. Grabinski, Semi-Insulating III-V Materials, ed. G. Grossmann and L. Ledebo (London: IOP, 1988), p. 21.
24. S. Miyazawa and K. Wada, Appl. Phys. Lett. 48, 905 (1986).10.1063/1.97018 ↗
25. R. Anholt and T.W. Sigmon, IEEE Electron Device Lett. 8, 16 (1987).10.1109/EDL.1987.26535 ↗