journal article·2009-07

Preliminary Study of Single Phase Preparation and Doping Effect of β-Zn4Sb3

Takashi Ueda, Kazuhiro Hasezaki

Journal of Electronic Materials· Volume 38· Issue 7
Publisher page

Abstract

Single phase β-Zn 4 Sb 3 was prepared by the application of a two-stage heat treatment, and impurity elements were doped. The undoped and doped samples were prepared by direct melting followed by two-stage heat treatment at 450°C and 400°C after solidification of the samples in sealed quartz ampoules. Impurity doping of the samples was performed by the addition of 1 at.% of Se, In, Pb, Te, or Bi. The resulting samples were characterized by x-ray diffraction (XRD), differential thermal analysis (DTA), optical microscopy, and electron probe microanalysis, and their Seebeck coefficients were determined at room temperature. The undoped samples were determined by XRD and DTA to comprise single phase β-Zn 4 Sb 3 , while the doped samples were composed of multiple phases. From the measurements of the Seebeck coefficient, all samples were found to be p-type and all were found to have almost the same values. These results indicate that β-Zn 4 Sb 3 has limited solubility for these impurity elements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Semiconductor materials and interfaces · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. T. Caillat, J.-P. Flurial, and A. Borshchevsky, J. Phys. Chem. Solids 58, 1119 (1997). doi: 10.1016/S0022-3697(96)00228-410.1016/S0022-3697(96)00228-4 ↗
2. T.J. Zhu, X.B. Zhao, M. Yan, S.H. Hu, T. Li, and B.C. Chou, Mater. Lett. 46, 44 (2000). doi: 10.1016/S0167-577X(00)00140-310.1016/S0167-577X(00)00140-3 ↗
3. M. Tapiero, S. Tarabichi, J.G. Gies, C. Noguet, J.P. Zielinger, M. Joucla, J.L. Loison, and M. Robino, Sol. Energy Mater. 12, 257 (1985). doi: 10.1016/0165-1633(85)90051-610.1016/0165-1633(85)90051-6 ↗
4. A. Ioffe, Semiconductor Thermoelectrics and Thermoelectric Cooling, Infosearch, London, (1957).
5. M. Tsutsui, L.T. Zhang, K. Ito, and M. Yamagu, Intermetallics 12, 809 (2004). doi: 10.1016/j.intermet.2004.02.03010.1016/j.intermet.2004.02.030 ↗
6. J. Nylén, S. Lidin, M. Andersson, H. Liu, N. Newman, and U. Häussermann, J. Solid State Chem. 180, 2603 (2007). doi: 10.1016/j.jssc.2007.07.01310.1016/j.jssc.2007.07.013 ↗
7. B L. Pedersen, H. Birkedal, E. Nishibori, A. Bentien, M. Sakata, M. Nygren, P.T. Frederiksen, and B.B. Iversen, Chem. Mater. 19, 6304 (2007). doi: 10.1021/cm702247b10.1021/cm702247b ↗
8. B.L. Pedersen, and B.B. Iversen, Appl. Phys. Lett. 89, 242108 (2006). doi: 10.1063/1.240461210.1063/1.2404612 ↗
9. B.L. Pedersen, H. Birkedal, B.B. Iversen, M. Nygren, and P.T. Frederiksen, Appl. Phys. Lett. 92, 161907 (2008). doi: 10.1063/1.2916705 .10.1063/1.2916705 ↗
10. Y.A. Ugai, T.A. Marshakova, V.Y. Shevchenko, and N.P. Demina, Inorg. Mater. 5, 1180 (1969).
11. L.A. Zabdyr, Comput. Coupling Diagr. Thermochem. 17, 269 (1993).10.1016/0364-5916(93)90005-V ↗