journal article·2002-10

Recrystallization and intermetallic formation in Au/Al and Au/Zn bimetallic films

Anil K. Chinthakindi, Dhananjay Bhusari, Brian P. Dusch, Paul A. Kohl

Journal of Electronic Materials· Volume 31· Issue 10
Publisher page

Abstract

Bimetallic thin films are of interest for use in microelectromechanical systems (MEMS) for the fabrication of sensors and actuators. The coefficient of thermal expansion (CTE) mismatch between the two metal films of the bimetallic structure can be used to attain the desired level of deflection or actuation in the MEMS device. Gold/aluminum and gold/zinc films have desirable properties for use in bimetallic films because of their differences in CTE. The stress-temperature behavior of these bimetal configurations has been studied. The effect of deposition technique and recrystallization of the metal films on the total stress and strain of the bimetallic films has been investigated. It has been shown that the formation of intermetallic compounds between the metal layers changes the mechanical properties of composite films. The intermetallic compounds are often undesirable because of their uncontrolled composition and poor mechanical properties. The degree of formation of the intermetallic compounds in the gold/aluminum bimetallic films can be reduced by use of a diffusion barrier between the two metals. It is shown that aluminum oxide is an effective diffusion barrier, and it can be easily fabricated. Stress-strain measurements and chemical depth profiling of the bimetallic films with the diffusion barrier have been used to quantify the reduction in the formation of the intermetallic compounds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. V. Vaganov, N. Belov, S.R. In’t Hout, S. Terry, P.J. Hesketh, H. Hughes, and W.E. Bailey, Proc. Symp. of Microstructures and Microfabricated Systems IV, ed. P.J. Hesketh et al. (Pennington, NJ: Electrochem. Soc., 1998), pp. 102–111.
2. Y. Yang, Z. Zhou, X. Ye, and X. Jiang, Micro-Electro-Mechanical Systems (MEMS), 1996 Int. Mechanical Engineering Congr. and Exp. (1996), pp. 351–354.
3. A.C. Lapadatu, D. de Bruyker, D. Jakobsen, and R. Puers, Sensors Actuators A (Phys.) A82, 69 (2000).10.1016/S0924-4247(99)00311-8 ↗
4. Q. Zou, U. Sridhar, and R. Lin, Sensors Actuators A (Phys.) A78, 212 (1999).10.1016/S0924-4247(99)00236-8 ↗
5. Microelectronic Material Database, Center for Information and Numerical Data Analysis and Synthesis (CIN-DAS), Purdue University, West Lafayette, IN.
6. Metals Handbook, 9th ed. (New York: American Society of Metals, 1979), pp. 671–680.
7. T.C. Hodge, S.A. Bidstrup, and P.A. Kohl, IEEE Trans. Comp., Packaging Manufacturing Technol. 20, 241 (1997).10.1109/95.588580 ↗
8. J.T. Pan and S. Poon, MRS Proc. 154, 26 (1989).
9. M.A. Moske, J.E. Lewis, and P.S. Ho, Proc. Annual Tech. Conf. Soc. Plastic Eng. 1731 (1991).
10. P.A. Flinn, J. Mater. Res. 6, 1498 (1991).10.1557/JMR.1991.1498 ↗
11. T.C. Hodge, N.R. Grove, B. Sinno, S.A. Bidstrup, and P.A. Kohl, J. Microcircuits Electron. Packaging 20, 12 (1997).
12. P.A. Flinn, D.S. Gardner, and W.D. Nix, IEEE Trans. Electron. Dev. ED-34, 689 (1987).10.1109/T-ED.1987.22981 ↗
13. P.A. Kohl, Modern Electroplating, ed. M. Schlesinger and M. Paniov (New York: Wiley & Sons, 2000).
14. G. Majni, C. Nobili, G. Ottaviani, M. Costato, and E. Galli, J. Appl. Phys. 52, 4074 (1981).
15. J.M. Vandenberg and R.A. Hamm, J. Vac. Sci. Technol. 19, 80 (1981).10.1116/1.571021 ↗
16. Z. Marinkovic and V. Simic, Thin Solid Films 75, 229 (1981).10.1016/0040-6090(81)90400-4 ↗
17. G.G. Stoney, Proc. R. Soc. A82, 172 (1909).10.1098/rspa.1909.0021 ↗
18. N.B. Pilling and R.E. Bedworth, J. Inst. Met. 29, 529 (1923).