Assessment of Tight Pixel Geometry Influence on Surface Chemistry of Hg1−X Cd X Te Focal Plane Array by Time of Flight–Secondary Ion Mass Spectroscopy: Novel Analytical Methods
Source abstract
Abstract
Factors such as lateral control of surface chemistry, reproducible etch depths and widths, and elimination of cross-contamination are vital to achieving world-class Hg1-X Cd X Te focal plane infrared detector arrays. Raytheon Vision Systems (RVS) has made significant progress toward a greater understanding of these factors. The current investigation applies time of flight–secondary ion mass spectroscopy (TOF-SIMS) to assess the manner in which Hg1-X Cd X Te surface chemistry is influenced by three different critical physical-chemical factors: (1) process chemistry, including baseline and four alternatives; (2) patterned photoresist format; and (3) etch geometry, including aspect ratio, trench depth, trench width, and unit cell spacing. The first of two patterned photoresist formats consisted of an array having 15-μm unit cells with 5-μm-wide and either 3.5-μm- or 6-μm-deep trenches. The second format consisted of a special diagnostic array of parallel dry-etched stripes having various permutations of trench depths (6 μm and 10 μm), trench widths (3 μm and 5 μm), and trench-to-trench separations (3 μm, 5 μm, and 20 μm). The surface chemistry results relative to etch-depth/width ratios, exposed Hg1−X Cd X Te area (etch widths), and trench separation distances show that these parameters have a measurable influence on cross-contaminant abundance and type and on the relative ranking of the process cleaning efficacies. Novel analytical methods for using TOF-SIMS data to qualitatively assess cleaning efficacy, geometry-dependent surface species distributions, the polar/hydrophilic and nonpolar/hydrophobic nature of the processed surface, and the dependence of cleaning efficacy on surface chemistry are also discussed. These methods are intended for use in a variety of studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Advanced Semiconductor Detectors and Materials · Mercury impact and mitigation studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Arthur T. Hubbard, The Handbook of Surface Imaging and Visualization (Boca Raton, FL: CRC Press, 1995)
2. R.N. Savage, Solid State Technol. (2003)
3. N. Veisfeld, J.D. Geller, J. Vac. Sci. Technol. 6, 2077 (1988)10.1116/1.575188 ↗
4. D. Sidawi, R&D Mag. 46, 40 (2004)
5. R. Olshove, G. Garwood, I. Mowat, J. Bangs, M. Liguori, J. Electron. Mater. 34, 851 (2005)10.1007/s11664-005-0031-7 ↗
6. R. Olshove, G. Garwood, J. Bangs, M. Liguori (Paper presented at Proc. 2005 MSS Specialty Group on Materials, Charleston, NC, Feb. 2005)
7. R. Olshove, G. Garwood, E. Pettijohn, R. Emerson, F. Lua, E. Olson, J. Bangs, J. Electron. Mater. 35, 1185 (2006)10.1007/s11664-006-0239-1 ↗
8. P. Fiorani, G. Murgutti, G. Mariani, S. Matarazzo, and G. Moccia (Paper presented at SPIE Conf. on In-Line Characterization Techniques for Performance and Yield Enhancement in Microelectronic Manufacturing, Santa Clara, CA, 1998)
9. S.D. Hossain-Pas, M.F. Pas, M.A. Douglas, Electrochem. Soc. Proc. 95 (Pennington, NJ: Electrochemical Society, 1998)
10. J.C. Vickerman, in TOF-SIMS, Surface Analysis by Mass Spectroscopy, eds. J.C. Vickerman, D. Briggs (Chichester, West Sussex, United Kingdom: IM Publications, 2001)