Low-resistance polysilicon process in contact application for high density devices
Source abstract
Abstract
For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H2-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin Rc, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Semiconductor Devices and Circuit Design · Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. S. Wolf and R.N. Tauber, Silicon Processing for the VLSI ERA (CA: Lattice Press, 1990) Chap. 6, pp. 149–224.
2. H. Hada, T. Tatsumi, K. Miyanaga, S. Iwao, H. Mori, and K. Koyama, Electron Devices Meeting (IEDM Technical Digest, 1995), pp. 665–668.
3. M.R. Goulding, Mater. Sci. Eng. B17, 47 (1993).10.1016/0921-5107(93)90080-7 ↗
4. J. Murota, N. Nakamura, M. Kato, T. Ohmi, and N. Mikoshiba, Appl. Phys. Lett. 54, 1007 (1989).10.1063/1.100781 ↗
5. H. Kotaki, M. Nakano, Y. Takegawa, S. Kakimoto, Y. Mori, K. Mitsuhashi, J. Takagi, S. Tsuchimoto, and Y. Akagi, Electron Devices Meeting (IEDM Technical Digest, 1993), pp. 839–842.
6. T. Ito, Proc. Int. Symp. Semi. Manuf. V-3, 103 (1994).
7. J.H. Chen, T.F. Lei, T.S. Chao, T.P. Su, J. Huang, A. Tuan, and S.K. Chen, Electron. Lett. 36, 756 (2000).10.1049/el:20000580 ↗
8. R.E. Thomas, M.J. Mantini, R.A. Rudder, D.P. Malta, S.V. Hattangady, and R.J. Markunas, J. Vac. Sci. Technol. A 10, 817 (1992).10.1116/1.577678 ↗
9. H.W. Kim and R. Reif, Thin Solid Films 289, 192 (1996).10.1016/S0040-6090(96)08841-4 ↗
10. J.H. Comfort, L.M. Garverick, and R. Reif, J. Appl. Phys. 62, 3388 (1987).10.1063/1.339301 ↗
11. W. Kern and D.A. Puotinen, RCA Rev. 31, 187 (1970).
12. K. Oda and Y. Kiyota, J. Electrochem. Soc. 143, 2361 (1996).10.1149/1.1837008 ↗
13. W.S. Cheong, J.H. Jung, J.W. Park, and D.J. Ahn, Chemical Vapor Deposition 2000, ed. M.D. Allendorf and M.L. Hitchman (Pennington, NJ: The Electrochemical Society, 2000), pp. 411–418.
14. S.J. Proctor, L.W. Linholn, and J.A. Mazer, IEEE Trans. Electron Dev. 30, 1535 (1983).10.1109/T-ED.1983.21334 ↗
15. K.N. Kim, C.G. Hwang, and J.G. Lee, IEEE Trans. Electron Dev. 45, 598 (1998).10.1109/16.661221 ↗