journal article·2001-12

Effect of via etching process and postclean treatment on via electrical performance

Chiew Nyuk Ho, Yeow Kheng Lim, Higelin Gerald, Wang Ling Goh, Man Siu Tse, Alex See

Journal of Electronic Materials· Volume 30· Issue 12
Publisher page

Abstract

The effects of the via etching process as well as the postclean treatment (PCT) on the electrical performance of vias were studied. Stress-migration (SM) tests were carried out to investigate the effect of temperature. Both the thermal and electrical factors were assessed in the wafer-level conventional electromigration (EM) tests. Our results showed that the removal of the TiN antireflection coating (ARC) layer during via etch results in lower initial via resistance, higher resistance to SM, and longer EM lifetime. On the other hand, with additional PCT, the initial via resistance and SM resistance became worse. The CxFy residues1 induced by the PCT step remain at the bottom of the via and degrade the interface properties. However, the EM lifetime seems to be unaffected by these residues. The better EM performance might be related to the removal of the TiOxNy layer by the PCT step.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and devices · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. C.N. Ho, G. Higelin, C.H. Low, A. See, L. Chan, and D.H.C. Chua (Paper presented at 196th Joint International Meeting of the Electrochemical Society, 1999).
2. F. Fracassi, R. d'Agostino, R. Lamendola, and I. Mangieri, J. Vac. Sci. Technol. A 13(2)., 1995, pp. 335–342.10.1116/1.579419 ↗
3. C.A. Martin and J.W. McPherson, VMIC Conf. (1989), pp. 168–175.
4. J.R. Lloyd, Mater. Res. Soc. Symp. Proc. 391, 231 (1995).10.1557/PROC-391-231 ↗
5. L.M. Ting, G. Dixit, M. Jain, K.A. Littau, H. Tran, M. Chang, and A. Sinha, Mater. Res. Soc. Symp. Proc. 391, 453 (1995).10.1557/PROC-391-453 ↗
6. L. J. Belliott, T. Spooner, J.H. Rose, and R. Shuman, Mater. Res. Soc. Symp. Proc. 391, 459 (1995).10.1557/PROC-391-459 ↗
7. C.D. Graas, H.A. Le, J.W. McPherson, and R.H. Havemann, IEEE-Int. Symp. on Reliability Physics (IRPS) (1994), pp. 173–177.
8. Y.H. Lee, K. Wu, N. Mickie, I.J. Ma, and S. Hui, Via Delamination—A Novel Electromigration Failure Mechanism (IEEE/IRPS, 1997), pp. 206–210.10.1109/RELPHY.1997.584261 ↗
9. http://www.dupont.com/cgi-bin/corp/proddbx.cgi
10. C.D. Graas, H.A. Le, and T.A. Rost, Correlations between Initial Via Resistance and Reliability Performance (IEEE/IRPS, 1997), pp. 44–48.10.1109/RELPHY.1997.584233 ↗
11. Low Wye Boon (EEE Master's thesis, Nanyang Technological University, 2000).
12. M. Small, D. Crook, E. Nikkel, and D. Buck, Analysis of Stress-Driven Delamination in Contact Vias (SPIE, 1995), vol. 2874, pp. 248–259.
13. Y. Inoue, S. Tanimoto, K. Tsujimura, T. Yamashita, Y. Ibara, Y. Yamashita, and K. Yoneda, J. Electrochem. Soc. 141, 1056 (1994).10.1149/1.2054840 ↗
14. J.A. Walls, IEEE Electron Dev. Lett. 16 430 (1995).10.1109/55.464807 ↗