journal article·2014-11

Effects of Carbon Coating on Microstructure and Dielectric Properties of CaCu3Ti4O12

Mao-Hua Wang, Xiao-Yu Ma, Bo Zhang, Fu Zhou

Journal of Electronic Materials· Volume 43· Issue 11
Publisher page

Abstract

CaCu3Ti4O12 (CCTO) powders coated with carbon were synthesized by using a high-energy ball milling method. The obtained samples were characterized by x-ray diffraction, transmission electron microscopy and scanning electron microscopy. The carbon-coated CCTO particles had a rough surface, which resulted from the growth of the carbon coating on the CCTO particles. It was found that the CCTO phase was observed as the major phase and no reaction occurred between the carbon and CCTO during the sintering process. The grain size of the CCTO ceramics decreased with the increase in carbon content, which indicated that carbon inhibits grain growth of CCTO ceramics. Specially, the dielectric constant decreased with the increase in carbon content. And CCTO1 ceramic (mass ratio of CCTO: carbon = 10:1) showed a lower dielectric constant (3.74 × 104), with the dielectric loss value (0.04) much lower than that of CCTO at 20°C (10 k Hz).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M.A. Subramanian, L. Dong, N. Duan, B.A. Reisner, and A.W. Sleight, J. Solid State Chem. 151, 323 (2000).10.1006/jssc.2000.8703 ↗
2. C. Masingboon, P. Thongbai, and S. Maensiri, J. Adv. Sci. Technol. 45, 2345 (2006).10.4028/www.scientific.net/AST.45.2345 ↗
3. T.B. Adams, D.C. Sinclair, and A.R. West, J. Am. Ceram. Soc. 89, 2833 (2006).10.1111/j.1551-2916.2006.01184.x ↗
4. L.C. Chang, D.Y. Lee, C.C. Ho, and B.S. Chiou, Thin Solid Films 516, 454 (2007).10.1016/j.tsf.2007.07.009 ↗
5. J. Li, A.W. Sleight, and M.A. Subramanian, J. Solid State Commun. 135, 260 (2005).10.1016/j.ssc.2005.04.028 ↗
6. S. Jin, H. Xia, Y. Zhang, J. Guo, and J. Xu, Mater. Lett. 61, 1404 (2007).10.1016/j.matlet.2006.07.041 ↗
7. T.B. Adams, D.C. Sinclair, and A.R. West, Adv. Mater. 14, 1321 (2002).10.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO;2-P ↗
8. S. Kwon, C.C. Huang, M.A. Subramanian, and D.P. Cann, J. Alloys Compd. 473, 433 (2009).10.1016/j.jallcom.2008.06.015 ↗
9. A.R. West, T.B. Adams, F.D. Morrison, and D.C. Sinclair, J. Eur. Ceram. Soc. 24, 1439 (2004).10.1016/S0955-2219(03)00510-7 ↗
10. T.B. Adams, D.C. Sinclair, and A.R. West, J. Am. Ceram. Soc. 89, 3129 (2006).10.1111/j.1551-2916.2006.01184.x ↗
11. R. Schmidt, M.C. Stennett, N.C. Hyatt, J. Pokorny, P.G. Jesús, M. Li, and D.C. Sinclair, J. Eur. Ceram. Soc. 32, 3313 (2012).10.1016/j.jeurceramsoc.2012.03.040 ↗
12. K.T. Jacob, G. Rajitha, G.M. Kale, A. Watson, and Z. Wang, J Alloys Compd. 488, 35 (2009).10.1016/j.jallcom.2009.09.010 ↗
13. L.J. Liu, H.Q. Fan, P.Y. Fang, and X.L. Chen, Mater. Res. Bull. 43, 1800 (2008).10.1016/j.materresbull.2007.07.012 ↗
14. S. Jesurani, S. Kanagesan, R. Velmurugan, C. Thirupathi, M. Sivakumar, and T. Kalaivani, Mater. Lett. 65, 3305 (2011).10.1016/j.matlet.2011.06.107 ↗
15. J.C. Zhao, J. Liu, and G. Ma, Ceram. Int. 38, 1221 (2012).10.1016/j.ceramint.2011.08.052 ↗
16. J.J. Schneider, Adv. Mater. 13, 529 (2001).10.1002/1521-4095(200104)13:7<529::AID-ADMA529>3.0.CO;2-X ↗
17. L.M. Marzan, M. Giersig, and P. Mulvaney, Langmuir 12, 4329 (1996).10.1021/la9601871 ↗
18. W.C. Chan and S. Nie, Science 281, 2016 (1998).10.1126/science.281.5385.2016 ↗
19. C.H. Xu, J. Mater. Sci. 40, 4419 (2005).10.1007/s10853-005-3826-2 ↗
20. V. Chabretou, C.H. Allibert, and J.M. Missiaen, J. Mater. Sci. 38, 2581 (2003).10.1023/A:1024418131674 ↗
21. I. Borgh, P. Hedström, A. Borgenstam, J. Ågren, and J. Odqvist, Int. J. Refract. Met. H 42, 30 (2014).10.1016/j.ijrmhm.2013.10.004 ↗
22. V. Chabretou, O. Lavergne, J.M. Missiaen, and C.H. Allibert, Met. Mater. 5, 205 (1999).10.1007/BF03026054 ↗
23. H. Erkalfa, Z. Misirli, and T. Baykara, J. Mater. Process. Technol. 62, 108 (1996).10.1016/0924-0136(95)02203-1 ↗
24. B. Milsom, G. Viola, Z.P. Gao, F. Inam, T. Peijs, and M.J. Reece, J. Eur. Ceram. Soc. 32, 4149 (2012).10.1016/j.jeurceramsoc.2012.07.028 ↗
25. W. Luan, L. Gao, and J. Guo, Ceram. Int. 25, 727 (1999).10.1016/S0272-8842(99)00009-7 ↗
26. A. Moisala, Q. Li, I.A. Kinloch, and A.H. Windle, Compos. Sci. Technol. 66, 1285 (2006).10.1016/j.compscitech.2005.10.016 ↗
27. X.T. Wang, N.P. Padture, and H. Tanaka, Nat. Mater. 3, 539 (2004).10.1038/nmat1161 ↗
28. S.W. Kwon and D.H. Yoon, Ceram. Int. 33, 1357 (2007).10.1016/j.ceramint.2006.05.008 ↗
29. L. Marchin, S. Guillemet-Fritsch, B. Durand, A.A. Levchenko, A. Navrotsky, and T. Lebey, J. Am. Ceram. Soc. 91, 485 (2008).10.1111/j.1551-2916.2007.02174.x ↗