The Use of Nanoclays to Modify the Morphology and Photoluminescence of Electrospun Poly(9-vinylcarbazole)/Poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] Blend Fibers
Source abstract
Abstract
The morphology and photoluminescence properties of electrospun poly(9-vinylcarbazole) (PVK)/poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) blend fibers, which were loaded with either halloysite clay nanotubes (HNTs) or an organically modified montmorillonite (OMMT) clay, were studied by scanning electron microscopy, transmission electron microscopy, and fluorescence spectroscopy. A concentration range of 0–30 wt.% was used for the clays, while the MEH-PPV concentration was fixed at 0.5 wt.%. Both clays, especially the OMMT clay, increased the phase separation of the components in the electrospun PVK/MEH-PPV blend fibers. This was attributed to their selective localization on the polymer phases. The HNTs and OMMT clay also increased energy transfer to the lowest energy states of MEH-PPV generated during electrospinning, and modified the amount of the partially overlapping conformation of carbazole groups (p-PVK) that constrained the aggregation of the PVK chains. These changes resulted in an increased emission from p-PVK, which varied depending on the type and concentration of the clay.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A. Camposeo, F. Di Benedetto, R. Cingolani, and D. Pisignano, Appl. Phys. Lett. 94, 043109 (2009).10.1063/1.3064139 ↗
2. H.C. Chen, C.T. Wang, C.L. Liu, Y.C. Liu, and W.C. Chen, J. Polym. Sci. B47, 463 (2009).10.1002/polb.21651 ↗
3. D. Wu, Y. Zhang, M. Zhang, and M. Yu, Biomacromolecules 10, 417 (2009).10.1021/bm801183f ↗
4. A. Karim, J.F. Douglas, G. Nisato, D.W. Liu, and E.J. Amis, Macromolecules 32, 5917 (1999).10.1021/ma990439f ↗
5. Y.S. Lipatov, A.E. Nesterov, T.D. Ignatova, and D.A. Nesterov, Polymer 43, 875 (2002).10.1016/S0032-3861(01)00632-2 ↗
6. T. Lin, Z. Zhu, T. Chen, and B. Guo, J. Appl. Polym. Sci. 129, 47 (2013).10.1002/app.38700 ↗
7. G. Filippone, N.T. Dintcheva, F.P. La Mantia, and D. Acierno, Polymer 51, 3956 (2010).10.1016/j.polymer.2010.06.044 ↗
8. D. Lin, A. Boshetti-de-Fierro, M. Alexandre, C. Abetz, H. Böttcher, V. Abetz, H. Böttcher, L. Urbanczyk, C. Jérôme, and C.C. Han, Compos. Sci. Technol. 71, 1893 (2011).10.1016/j.compscitech.2011.09.003 ↗
9. E. Moghbelli, H.J. Sue, and S. Jain, Polymer 51, 4231 (2010).10.1016/j.polymer.2010.05.025 ↗
10. J.S. Hong, H. Namkung, K.H. Ahn, S.L. Lee, and C. Kim, Polymer 47, 3967 (2006).10.1016/j.polymer.2006.03.077 ↗
11. H. Cho, S.Y. Min, and T.W. Lee, Macromol. Mater. Eng. 298, 475 (2013).10.1002/mame.201200364 ↗
12. V. Vohra, U. Giovanella, R. Tubino, H. Murata, and C.H. Botta, ACS Nano 5, 5572 (2011).10.1021/nn201029c ↗
13. B. Sundaray, V. Subramanian, T.S. Natarajana, R.Z. Xiang, C.C. Chang, and W.S. Fann, Appl. Phys. Lett. 84, 1222 (2004).10.1063/1.1647685 ↗
14. Q.P. Pham, U. Sharma, and A.G. Mikos, Tissue Eng. 12, 1197 (2006).10.1089/ten.2006.12.1197 ↗
15. K.H. Yoon, S.B. Park, and B.D. Yang, Mater. Chem. Phys. 87, 39 (2004).10.1016/j.matchemphys.2004.03.008 ↗
16. C. Wang, E. Yan, Z. Huang, Q. Zhao, and Y. Xin, Macromol. Rapid Commun. 28, 205 (2007).10.1002/marc.200600626 ↗
17. S.A. Carter, J.C. Scott, and P.J. Brock, Appl. Phys. Lett. 71, 1145 (1997).10.1063/1.119848 ↗
18. C. Ton-That, M.R. Phillips, and T.P. Nguyen, J. Lumin. 128, 2031 (2008).10.1016/j.jlumin.2008.07.004 ↗
19. T.W. Lee, O.O. Park, J.J. Kim, J.M. Hong, and Y.C. Kim, Chem. Mater. 13, 2217 (2001).10.1021/cm010201h ↗
20. C.O. Oriakhi, X. Zhang, and M.M. Lerner, Appl. Clay Sci. 15, 109 (1999).10.1016/S0169-1317(99)00018-6 ↗
21. C. Jing, L. Chen, Y. Shi, and X. Jin, Eur. Polym. J. 41, 2388 (2005).10.1016/j.eurpolymj.2005.05.007 ↗
22. T.Q. Nguyen, J. Wu, V. Doan, B.J. Schwartz, and S.H. Tolbert, Science 288, 652 (2000).10.1126/science.288.5466.652 ↗
23. H. Fong, I. Chun, and D.H. Reneker, Polymer 40, 4585 (1999).10.1016/S0032-3861(99)00068-3 ↗
24. T. Ye, J. Chen, and D. Ma, Phys. Chem. Chem. Phys. 12, 15410 (2010).10.1039/c0cp00461h ↗
25. J. Ren, Y. Huangh, Y. Liu, and X. Tang, Polym. Test 24, 316 (2005).10.1016/j.polymertesting.2004.11.004 ↗
26. L. Qian, D. Bera, and P.H. Holloway, Appl. Phys. Lett. 92, 053303 (2008).10.1063/1.2840157 ↗
27. R. Traiphol, N. Charoenthai, T. Srikhirin, T. Kerdcharoen, T. Osotchan, and T. Maturos, Polymer 48, 813 (2007).10.1016/j.polymer.2006.12.003 ↗
28. G. Padmanaban and S. Ramakrishnan, J. Am. Chem. Soc. 122, 2244 (2000).10.1021/ja9932481 ↗
29. T.Q. Nguyen, I.B. Martini, J. Liu, and B.J. Schwartz, J. Phys. Chem. B 104, 237 (2000).10.1021/jp993190c ↗