Scanning electron microscopy study of the cross section of intermetallic compound in the solder ball on the plastic ball grid array package following reliability tests
Source abstract
Abstract
The 63Sn-37Pb solder ball (φ=300 µm) was attached to gold-nickel-plated plastic ball grid array (PBGA) substrates, with gold and nickel thicknesses of 0.6 µm and 7 µm, respectively. The thickness of the intermetallic compound (IMC) in solder balls was measured following each instance of infrared (IR) reflow (90 sec at 230 °C), level II preconditioning, a pressure cooking test (for 96 h or 168 h), and a temperature cycle test (with 500 or 1,000 cycles). Scanning electron microscopy (SEM) was used to identify the cross-section sites of the solder balls following testing. Following all the reliability tests, the IMC demonstrated that an IMC thickness exceeding 5 µm will reduce the solder ball shear strength owing to diffusion of Ni into the solder balls.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. J.J. Liu, H. Berg, Y. Wen, S. Mulgaonker, R. Bowlby, and A. Mawer, Mater. Chem. Phys. 40, 236 (1995).10.1016/0254-0584(95)80004-2 ↗
2. S.H. Fan, Y.C. Chan, C.W. Tang, and J.K.L. Lai, IEEE Electric Compon. Technol. Conf. (Piscataway, NJ: IEEE, 2000), pp. 1652–1657.
3. Y.K. Tsui, S.W. Ricky, and X. Huang, IEEE Int. Symp. on Electronic Materials and Packaging (Piscataway, NJ: IEEE, 2002), pp. 478–481.
4. T. Miyazaki and K. Terashima, IEEE Int. Electronics Manufacturing Technology Symp. (Piscataway, NJ: IEEE, 1994), pp. 333–340.10.1109/IEMT.1994.404727 ↗
5. A.R. Syed, IEEE Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1996), pp. 1211–1216.
6. S.H. Fan, Y.C. Chan, X.C. Zou, and Z.Q. Yu, IEEE/CPMT Electronics Packaging Technology Conf. (Piscataway, NJ: IEEE, 1998), pp. 264–268.
7. Y. Tian, C. Wang, C.K. Pater, and Deming, IEEE Int. Symp. on Electronic Materials and Packaging (Piscataway, NJ: IEEE, 2002), pp. 167–172.
8. T.E. Wong, F.W. Palmieri, and H.S. Fenger, IEEE Int. Society Conf. on Thermal Phenomena (Piscataway, NJ: IEEE, 2002), pp. 961–966.
9. Z. Liji, W. Li, X. Xiaoming, and W. Kempe, IEEE Trans. Electron. Packaging Manufacturing 25, 284 (2002).10.1109/TEPM.2002.807720 ↗
10. L. Yang, J.B. Bernstein, and K.C. Leong, IEEE Trans. Electron. Packaging Manufacturing 25, 91 (2002).10.1109/TEPM.2002.1021633 ↗
11. Y. Sawada, A. Yamaguchi, S. Oka, and H. Fujioka, IEEE Trans. Compon. Packaging Technologies 25, 73 (2002).10.1109/6144.991178 ↗
12. S.H. Fan, Y.C. Chan, C.W. Tang, and J.K.L. Lai, IEEE Trans. Adv. Packaging 24, 486 (2001).10.1109/6040.982834 ↗
13. C.E. Ho, S.Y. Tsai, and C.R. Kao, IEEE Trans. Adv. Packaging, 24, 493 (2001).10.1109/6040.982835 ↗
14. Sherman Bank, Reflow Soldering to Gold, Electronic Packaging & Production June, 69 (1995).
15. S.C. Hung, P.J. Zheng, S.C. Lee, and J.J. Lee, IEEE, p. 7 (1999).
16. Yeh-Fang Duann and Jen-Hung Chiang (unpublished data, 2003).
17. Yeh-Fang Duann and Jen-Hung Chiang (unpublished data, 2004).
18. P.J. Kay and C.A. Mackay, Trans. Inst. Met. Finish 57, 169 (1979).10.1080/00202967.1979.11870510 ↗
19. P.A. Kramer, J. Glazer, and J.W. Morris Jr., Metall. Mater. Trans. A 25A, 1249 (1994).10.1007/BF02652299 ↗
20. C.E. Ho, R. Zheng, G.L. Luo, A.H. Lin, and C.R. Kao, J. Electron. Mater., 29, 1175 (2000).10.1007/s11664-000-0010-y ↗
21. A.M. Minor and J.W. Morris Jr., Metall. Mater. Trans. A 31A, 798 (2000).10.1007/s11661-000-0022-5 ↗
22. A.M. Minor and J.W. Morris Jr., J. Electron. Mater., 29, 1170 (2000).10.1007/s11664-000-0009-4 ↗