journal article·2009-07

Preparation and Thermoelectric Properties of Ag0.5In0.5−x Pb5Sn4Te10

Y. Yan, X. Tang, H. Liu, Q. Zhang

Journal of Electronic Materials· Volume 38· Issue 7
Publisher page

Abstract

A series of compounds with composition Ag0.5In0.5−xPb5Sn4Te10 (x = 0.05 to 0.20) were prepared by slowly cooling the melts of the corresponding elements, and the effect of In content on the thermoelectric transport properties of these compounds has been investigated. Results indicate that the compounds’ electronic structure is sensitive to In content, and that the carrier concentration of these compounds at room temperature increases from 4.86 × 1018 cm−3 to 3.85 × 1021 cm−3 as x increases from 0.05 to 0.20. For these compounds, electrical conductivity decreases and Seebeck coefficient increases with increasing In content. Ag0.05In0.03Pb0.5Sn0.4Te10 shows very low lattice thermal conductivity, and has a maximum dimensionless figure of merit ZT of 1.2 at 800 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Y. Vorobiev, J. Gonzalez-Hernandez, P. Vorobiev, and L. Bulat, Sol. Energy, 80, 170 (2006) doi: 10.1016/j.solener.2005.04.02210.1016/j.solener.2005.04.022 ↗
2. R. Funahashi, T. Mihara, M. Mikami, and S. Urata, Materials and Technologies for Direct Thermal-to-Electric Energy Conversion Symposium, Vol. 886 (2006), p. 493
3. G.S. Nolas, J.L. Cohn, G.A. Slack, and S.B. Schujman, Appl. Phys. Lett., 73, 178 (1998) doi: 10.1063/1.12174710.1063/1.121747 ↗
4. B.C. Sales, D. Mandrus, and R.K. Williams, Science, 272, 1325 (1996) doi: 10.1126/science.272.5266.132510.1126/science.272.5266.1325 ↗
5. X. Tang, W. Xie, H. Li, W. Zhao, Q. Zhang, and M. Niino, Appl. Phys. Lett., 90, 012102 (2007) doi: 10.1063/1.242500710.1063/1.2425007 ↗
6. Z. He, C. Stiewe, D. Platzek, G. Karpinski, E. Muller, S. Li, M. Toprak, and M. Muhammed, Nanotechnology, 18, 235602 (2007) doi: 10.1088/0957-4484/18/23/23560210.1088/0957-4484/18/23/235602 ↗
7. X.Y. Zhao, X. Shi, L.D. Chen, W.Q. Zhang, S.Q. Bai, Y.Z. Pei, X.Y. Li, and T. Goto, Appl. Phys. Lett., 89, 092121 (2006) doi: 10.1063/1.234524910.1063/1.2345249 ↗
8. K.F. Hsu, S. Loo, F. Guo, W. Chen, J.S. Dyck, C. Uher, T. Hogan, E.K. Polychroniadis, and M.G. Kanatzidis, Science, 303, 818 (2004) doi: 10.1126/science.109296310.1126/science.1092963 ↗
9. E. Quarez, K.F. Hsu, R. Pcionek, N. Frangis, E.K. Polychroniadis, and M.G. Kanatzidis, J. Am. Chem. Soc., 127, 9177 (2005) doi: 10.1021/ja051653o10.1021/ja051653o ↗
10. P.F.P. Poudeu, J. D’Angelo, A.D. Downey, J.L. Short, T.P. Hogan, and M.G. Kanatzidis, Angew. Chem. Int. Edit., 45, 3835 (2006) doi: 10.1002/anie.20060086510.1002/anie.200600865 ↗
11. M.K. Han, K. Hoang, H.J. Kong, R. Pcionek, C. Uher, K.M. Paraskevopoulos, S.D. Mahanti, and M.G. Kanatzidis, Chem. Mater., 20, 3512 (2008) doi: 10.1021/cm703661g10.1021/cm703661g ↗
12. J. Androulakis, K.F. Hsu, R. Pcionek, H. Kong, C. Uher, J.J. Dangelo, A. Downey, T. Hogan, and M.G. Kanatzidis, Adv. Mater., 18, 1170 (2006) doi: 10.1002/adma.20050277010.1002/adma.200502770 ↗
13. M. Orihashi, Y. Noda, L.D. Chen, T. Goto, and T. Hirai, J. Phys. Chem. Solids., 61, 919 (2000) doi: 10.1016/S0022-3697(99)00384-410.1016/S0022-3697(99)00384-4 ↗
14. B.C. Sales, D. Mandrus, B. C. Chakoumakos, V. Keppens and J. R. Thompson, Phys. Rev. B, 56, 15081 (1997) doi: 10.1103/PhysRevB.56.1508110.1103/PhysRevB.56.15081 ↗