journal article·2010-10

Void Growth Behavior in ULSI Cu Interconnections by Grain-Boundary Diffusion Simulation

Takashi Onishi, Masao Mizuno, Tetsuya Yoshikawa, Jun Munemasa, Takao Inoue, Aki Miyagaki, Hisashi Nakamoto

Journal of Electronic Materials· Volume 39· Issue 10
Publisher page

Abstract

The behavior of void growth in ultra-large-scale integration Cu interconnections has been investigated by grain-boundary diffusion simulation to confirm the effectiveness of the high-pressure reflow process for suppressing stress-induced voiding. Void growth was simulated by combining stress analysis and atomic flux analysis. The former was calculated by the finite-element method (FEM), and the latter was calculated by an unusual FEM in which grain boundaries were defined as elements. From the results of void growth analysis, we found that voids tend to disappear during the isochronal annealing step and that the void shrinkage rate can be increased by two to three times by applying pressure of 150 MPa compared with normal-pressure annealing. From the simulation results, it can be conjectured that the high-pressure reflow process is effective for eliminating voids in via holes of Cu interconnections.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. P. Singer, Semiconductor International November 1997 (1997), pp. 67–70.
2. P. Gwynne, IBM Research No. 4, 1997 (1997), pp. 17–22.
3. A.E. Braun, Semiconductor International April 1999 (1999), pp. 58–66.
4. B. Li, T.D. Sullivan, T.C. Lee, and D. Badami, Microelectron. Reliab. 44, 365 (2004).10.1016/j.microrel.2003.11.004 ↗
5. K. Abe, Y. Harada, M. Yoshimaru, and H. Onoda, J. Vac. Sci. Technol. B 22, 721 (2004).10.1116/1.1676618 ↗
6. T.C. Wang, T.E. Hsieh, M.T. Wang, D.S. Su, C.H. Chang, Y.L. Wang, and J.Y. Lee, J. Electrochem. Soc. 152, G45 (2005).10.1149/1.1828419 ↗
7. M.H. Lin, Y.L. Lin, K.P. Chang, K.C. Su, and T. Wang, Jpn. J. Appl. Phys. 45, 700 (2006).10.1143/JJAP.45.700 ↗
8. H. Tsuchikawa, Y. Mizushima, T. Nakamura, T. Suzuki, and H. Nakajima, Jpn. J. Appl. Phys. 45, 714 (2006).10.1143/JJAP.45.714 ↗
9. T. Ohshima, K. Hinode, H. Yamaguchi, H. Aoki, K. Torii, T. Saito, K. Ishikawa, J. Noguchi, M. Fukui, T. Nakamura, S. Uno, K. Tsugane, J. Murata, K. Kikushima, H. Sekisaka, E. Murakami, K. Okuyama, and T. Iwasaki, Proceedings of the 2002 IEEE International Electron Devices Meeting (San Francisco, 2002), pp. 757–760.
10. K. Yoshida, T. Fujimaki, K. Miyamoto, T. Honma, H. Kaneko, H. Nakazawa, and M. Morita, Proceedings of the 2002 IEEE International Electron Devices Meeting (San Francisco, 2002), pp. 753–756.
11. M. Ueki, M. Hiroi, N. Ikarashi, T. Onoda, N. Furutake, M. Yoshiki, and Y. Hayashi, Proceedings of the 2002 IEEE International Electron Devices Meeting (San Francisco, 2002), pp. 749–752.
12. E.T. Ogawa, J.W. McPherson, J.A. Rosal, K.J. Dickersn, T.C. Chiu, L.Y. Tsung, M.K. Jain, T.D. Bonifield, J.C. Ondrusek, and W.R. McKee, Proceedings of the IEEE 40th Annual International Reliability Physics Symposium (Dallas, TX, 2002), pp. 312–321.
13. M. Moriyama, S. Konishi, S. Tsukimoto, and M. Murakami, Mater. Trans. 45, 3172 (2004).10.2320/matertrans.45.3172 ↗
14. S. Konishi, M. Moriyama, and M. Murakami, Mater. Trans. 43, 1624 (2002).10.2320/matertrans.43.1624 ↗
15. A. Sekiguchi, J. Koike, S. Kamiya, M. Saka, and K. Maruyama, Appl. Phys. Lett. 79, 1264 (2001).10.1063/1.1399021 ↗
16. A. Hobbs, S. Murakami, T. Hosoda, S. Ohtsuka, M. Miyajima, S. Sugatani, and T. Makamura, Mater. Trans. 43, 1629 (2002).10.2320/matertrans.43.1629 ↗
17. T. Fujikawa, K. Suzuki, T. Masui, and T. Onishi, Advanced Metallization Conference, 1999, ed. M.E. Gross, T. Gessner, N. Kobayashi, and Y. Yasuda (Warrendale, PA: Materials Research Society, 1999), pp. 105–108.
18. K. Suzuki, T. Masui, T. Fujikawa, Y. Taguchi, and T. Kondo, Advanced Metallization Conference, 1999, ed. M.E. Gross, T. Gessner, N. Kobayashi, and Y. Yasuda (Warrendale, PA: Materials Research Society, 1999), pp. 155–160.
19. T. Fujikawa, T. Onishi, and T. Sato, Jpn. J. Appl. Phys. 40, 2191 (2001).10.1143/JJAP.40.2191 ↗
20. T. Onishi, H. Fujii, J. Munemasa, and T. Yoshikawa, Advanced Metallization Conference Asian Session 2001, ed. A.J. McKerrow, Y. Shacham-Diamond, S. Zaima, and T. Ohba (Warrendale, PA: Materials Research Society, 2001), pp. 245–250.
21. T. Onishi and T. Yoshikawa, Mater. Trans. 43, 1605 (2002).10.2320/matertrans.43.1605 ↗
22. T. Onishi, H. Fujii, T. Yoshikawa, J. Munemasa, T. Inoue, and A. Miyagaki, Thin Solid Films 425, 265 (2003).10.1016/S0040-6090(02)01120-3 ↗
23. P.G. Shewmon, Diffusion in Solids (New York: McGraw-Hill, 1963).
24. C. Herring, J. Appl. Phys. 21, 437 (1950).10.1063/1.1699681 ↗
25. A.C.F. Cooks, Appl. Solid Mech. 3, 30 (1989).
26. A.C.F. Cooks and A.A. Searle, Mech. Mater. 12, 279 (1991).10.1016/0167-6636(91)90024-T ↗