Fabrication of Bi2Sr2CaCu2O x and Bi2Sr2Ca2Cu3O x Superconductor Thick Films by Using Cu-Free Precursors on Ni Substrates
Source abstract
Abstract
We studied the formation of Bi2Sr2CaCu2O x (Bi-2212) and Bi2Sr2Ca2Cu3O x (Bi-2223) thick films in a heat treatment process of the Ni-sheathed Bi-Sr-Ca-Cu-O (BSCCO) system. Cu was electrodeposited initially on the Ni substrates (Cu/Ni). Well-oriented Bi-2212 superconductor thick films were formed successfully on Ni tapes by liquid reaction between Cu-free precursors and Cu/Ni tapes. However, only a small amount of Bi-2223 was formed. Thick films were prepared by screen-printing with Bi2O3, SrCO3, and CaCO3 powders on Cu/Ni tapes and heat treating them. Heat treatment was performed in the temperature range of 750–850°C in a tube furnace for several minutes to hours. The phases and the microstructures of the high temperature superconductor thick films were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Electrical properties were examined by the standard four-probe method. At the heat treatment temperature, the specimens were in a partially molten state during reaction between the oxidized copper layer and the screen-printed precursors on the Cu/Ni tapes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Physics of Superconductivity and Magnetism · Superconducting Materials and Applications · HVDC Systems and Fault Protection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. A.P. Malozemoff, W. Carter, S. Fleshler, L. Fritzemeier, Q. Li, L. Masur, P. Miles, D. Parker, R. Parrella, E. Podtburg, G.N. Riley, M. Rupich, J. Scudiere, and W. Zhang, IEEE Trans. Appl. Supercond. 9, 2469 (1999).10.1109/77.784978 ↗
2. T. Shibata, M. Watanabe, C. Suzawa, S. Isojima, J. Fujikami, K. Sato, H. Ishii, S. Honjo, and Y. Iwata, IEEE Trans. Power Del. 14, 182 (1999).10.1109/61.736712 ↗
3. Y. Yamada, Appl. Phys. Series 6: Bismuth-Based High-Temperature Superconductors, ed. H. Maeda and K. Togano (New York, NY: Marcell Dekker, 1996), p. 289.
4. A. Goyal, D.P. Norton, J.D. Budai, M. Paranthaman, E.D. Specht, D.M. Kroeger, D.K. Christen, Q. He, B. Saffian, F.A. List, D.F. Lee, P.M. Martin, C.E. Klabunde, E. Hartfield, and V.K. Sikka, Appl. Phys. Lett. 69, 43 (1996).10.1063/1.117489 ↗
5. T. Miyake, M. Kume, K. Yamaguchi, D.P. Amalnerkar, and H. Minoura, Thin Solid Films 397, 84 (2001).10.1016/S0040-6090(01)01359-1 ↗
6. J.P. Celis, A. Haseeb, and J.R. Roos, Trans. Inst. Met. Finish. 70, 123 (1992).10.1080/00202967.1992.11870958 ↗
7. M.E. Benzon, P. Leisner, C.N. Panagopoulou, and V.D. Papachristos, Proc. Europ. Conf. on Metallic Composite Deposits 222 (1996).
8. S.-C. Han, T.-H. Sung, Y.-H. Han, J.-S. Lee, and S.-J. Kim, Mater. Res. Soc. Symp. Proc. 623, 411 (2000).10.1557/PROC-623-411 ↗
9. Y. Kim, S.K. Kim, Y.-A. Jeon, Y. Kim, H. Paik, Y. Kim, S.-C. Han, Y.-H. Han, N.-H. Jeong, T.-H. Sung, J.-I. Hong, and K. No, J. Electroceram. 17, 1064 (2006).
10. Y. Qi, K. Sakai, H. Murakami, and T. Ito, Appl. Surf. Sci. 169–170, 336 (2001).
11. H. Tatani, Y. Qi, S. Migita, K. Sakai, and R. Aoki, Tech. Rep. Osaka Univ. 46, 27 (1996).