journal article·2012-06

Thermoelectric Properties of Pulsed Electric Current Sintered Samples of AgPb m SbSe17 (m = 16 or 17)

Chun-I Wu, Ilyia Todorov, Mercouri G. Kanatzidis, Edward Timm, Eldon D. Case, Harold Schock, Timothy P. Hogan

Journal of Electronic Materials· Volume 41· Issue 6
Publisher page

Abstract

Lead chalcogenide materials have drawn attention in recent years because of their outstanding thermoelectric properties. Bulk n-type materials of AgPbmSbTe2+m have been reported to exhibit high figure of merit, ZT, as high as 1.7 at 700 K. Recent reports have shown p-type lead selenide-based compounds with comparable ZT. The analogous material AgPbmSbSe17 shares a similar cubic rock-salt structure with PbTe-based compounds; however, it exhibits a higher melting point, and selenium is more abundant than tellurium. Using solid solution chemistry, we have fabricated cast AgPb15SbSe17 samples that show a peak power factor of approximately 17 μW/cm K2 at 450 K. Increasing the strength of such materials is commonly achieved through powder processing, which also helps to homogenize the source materials. Pulsed electric current sintering (PECS) is a hot-pressing technique that utilizes electric current through the die and sample for direct Joule heating during pressing. The mechanisms present during PECS processing have captured significant research interest and have led to some notable improvements in sample properties compared with other densification techniques. We report the thermoelectric properties of PECS samples of AgPbmSbSe17 along with sample fabrication and processing details.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. K.F. Hsu, S. Loo, F. Guo, W. Chen, J.S. Dyck, C. Uher, T. Hogan, E.K. Polychroniadis, and M.G. Kanatzidis, Science 303, 818 (2004).10.1126/science.1092963 ↗
2. H. Wang, Y. Pei, A.D. LaLonde, and G.F. Snyder, Adv. Mater. 23, 1366 (2011).10.1002/adma.201004200 ↗
3. J. Androulakis, C.H. Lin, H.J. Kong, C. Uher, C.I. Wu, T. Hogan, B.A. Cook, T. Caillat, K.M. Paraskevopoulos, and M.G. Kanatzidis, J. Am. Chem. Soc. 129, 9780 (2007).10.1021/ja071875h ↗
4. R. Venkatasubramanian, E. Siivola, T. Colpitts, and B. O’Quinn, Nature 413, 597 (6856).10.1038/35098012 ↗
5. T.C. Harman, P.J. Taylor, M.P. Walsh, and B.E. LaForge, Science 297, 2229 (2002).10.1126/science.1072886 ↗
6. Y.Y. Wang, N.S. Rogado, R.J. Cava, and N.P. Ong, Nature 423, 425 (2003).10.1038/nature01639 ↗
7. G.S. Nolas, J. Poon, and M.G. Kanatzidis, MRS Bull. 31, 199 (2006).10.1557/mrs2006.45 ↗
8. H. Böttner, G. Chen, and R. Venkatasubramanian, MRS Bull. 31, 211 (2006).10.1557/mrs2006.47 ↗
9. P. Reddy, S.Y. Jang, R.A. Segalman, and A. Majumdar, Science 315, 1568 (2007).10.1126/science.1137149 ↗
10. J.J. Urban, D.V. Talapin, E.V. Shevchenko, C.R. Kagan, and C.B. Murray, Nat. Mater. 6, 115 (2007).10.1038/nmat1826 ↗
11. H. Ohta, S. Kim, Y. Mune, T. Mizoguchi, K. Nomura, S. Ohta, T. Nomura, Y. Nakanishi, Y. Ikuhara, M. Hirano, H. Hosono, and K. Koumoto, Nat. Mater. 6, 129 (2007).10.1038/nmat1821 ↗
12. J.P. Harman, V. Jovovic, E.S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, S. Yamanaka, and G.J. Snyder, Science 321, 554 (2008).10.1126/science.1159725 ↗
13. J.R. Sootsman, D.Y. Chung, and M.G. Kanatzidis, Angew. Chem. Int. Ed. 48, 8616 (2009).10.1002/anie.200900598 ↗
14. A.L. Pilchak, F. Ren, E.D. Case, E.J. Timm, H.J. Schock, C.-I. Wu, and T.P. Hogan, Philos. Mag. 87, 4567 (2007).10.1080/14786430701566044 ↗
15. B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M.S. Dresselhaus, G. Chen, and Z. Ren, Science 320, 634 (2008).10.1126/science.1156446 ↗
16. Z. Xie, J. Yang, and Y. Huang, Mater. Lett. 37, 215 (1998).10.1016/S0167-577X(98)00094-9 ↗
17. A.M. Locci, R. Orru, G. Cao, and Z.A. Munir, J. Am. Ceram. Soc. 89, 848 (2006).10.1111/j.1551-2916.2005.00832.x ↗
18. Z.A. Munir, U. Anselmi-Tamburini, and M. Ohyanagi, J. Mater. Sci. 41, 763 (2006).10.1007/s10853-006-6555-2 ↗
19. D.M. Hullbert, A. Anders, J. Andersson, E.J. Lavernia, and A.K. Mukherjee, Scr. Mater. 60, 835 (2009).10.1016/j.scriptamat.2008.12.059 ↗
20. K. Kurosaki, T. Maekawa, H. Muta, and S. Yamanaka, J. Alloy. Compd. 397, 296 (2005).10.1016/j.jallcom.2005.01.028 ↗
21. P.-P. Shang, B.-P. Zhang, J.-F. Li, and N. Ma, Solid State Sci. 12, 1341 (2010).10.1016/j.solidstatesciences.2010.05.005 ↗
22. C.B. Lioutas, N. Frangis, I. Todorov, D.Y. Chung, and M.G. Kanatzidis, Chem. Mater. 22, 5630 (2010).10.1021/cm102016j ↗