journal article·2015-12

Effects of Bonding Conditions on Bondability Using Zn/Al/Zn Clad Solder

T. Yamaguchi, O. Ikeda, Y. Oda, S. Hata, K. Kuroki, H. Kuroda, A. Hirose

Journal of Electronic Materials· Volume 44· Issue 12
Publisher page

Abstract

Three-layer Zn/Al/Zn clad solders have been developed for high-temperature die attachment. The clad structure is used to improve the wettability and bondability of Zn-Al eutectic solder by preventing Al oxidation. The effects of the bonding conditions on the bondability with Zn/Al/Zn clad solder were investigated. Bonding was achieved in the temperature range from 385°C to 420°C under N2 atmosphere with oxygen concentration below 100 ppm. However, the bonding strength of the joint formed under N2 + 4% H2 atmosphere was almost 0 MPa, and stripe defects and air gaps remained in the bond layer. To improve the bondability under N2 + 4% H2 and expand the application range, a five-layer Cu/Zn/Al/Zn/Cu clad solder was developed in an attempt to prevent the Zn layers from being oxidized by the outer Cu layers. Cross-sectional observation of the Cu/Zn/Al/Zn/Cu clad solder revealed that the surface was covered by a Cu layer, and that Cu5Zn8 layers grew between the Cu and Zn layers. This clad solder exhibited high shear strength of over 80 MPa when formed under N2 + 4% H2 atmosphere, and no stripe defects or air gaps were observed in the bond layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. F. Lang, H. Yamaguchi, H. Ohashi, and H. Sato, J. Electron. Mater. 40, 7 (2011).10.1007/s11664-011-1661-6 ↗
2. Y. Shi, W. Fang, Z. Xia, Y. Lei, F. Guo, and X. Li, J. Mater. Sci. Mater. Electron. 21, 875 (2010).10.1007/s10854-009-0010-5 ↗
3. C.C. Lee and W.W. So, Thin Solid Films 366, 1 (2000).10.1016/S0040-6090(00)00739-2 ↗
4. S.W. Park, J.L. Jo, T. Sugahara, M. Ueshima, H. Iwamoto, and K. Suganuma, 4th Electronics System Integration Technologies Conference (2012).
5. T. Shimizu, H. Ishikawa, I. Ohnuma, and K. Ishida, J. Electron. Mater. 28, 11 (1999).10.1007/s11664-999-0153-4 ↗
6. M. Rettenmayr, P. Lambracht, B. Kempf, and C. Tschudin, J. Electron. Mater. 31, 4 (2002).10.1007/s11664-002-0144-1 ↗
7. Y. Akada, H. Tatsumi, T. Yamaguchi, A. Hirose, T. Morita, and E. Ide, Mater. Trans. JIM 49, 7 (2008).10.2320/matertrans.MF200805 ↗
8. S.W. Yoon, K. Shiozaki, S. Yasuda, and M.D. Glover, APEC (2012).10.4071/HITEC-2012-TA23 ↗
9. K. Suganuma and S. Kim, IEEE Electron Device Lett. 31, 1467 (2010).10.1109/LED.2010.2081338 ↗
10. J.E. Lee, K.S. Kim, K. Suganuma, J. Takenaka, and K. Hagio, Mater. Trans. 46, 11 (2005).
11. J. Pstrus, P. Fima, and T. Gancarz, J. Mater. Eng. Perform. 21, 5 (2012).10.1007/s11665-012-0174-7 ↗
12. T. Gancarz, J. Pstruś, P. Fima, and S. Mosińska, J. Mater. Eng. Perform. 21, 5 (2012).10.1007/s11665-012-0146-y ↗
13. Y. Takaku, L. Felicia, I. Ohnuma, R. Kainuma, and K. Ishida, J. Electron. Mater. 37, 3 (2008).10.1007/s11664-007-0344-9 ↗
14. Y. Takaku, K. Makino, K. Watanabe, I. Ohnuma, R. Kainuma, Y. Yamada, Y. Yagi, I. Nakagawa, T. Atsumi, and K. Ishida, J. Electron. Mater. 38, 1 (2009).10.1007/s11664-008-0528-y ↗
15. S.J. Kim, K.S. Kim, S.S. Kim, C.Y. Kang, and K. Suganuma, Mater. Trans. 49, 7 (2008).10.2320/matertrans.ME200713 ↗
16. A. Haque, Y.S. Won, A.S.M.A. Haseeb, and H.H. Masjuki, Electronic System-Integration Technology Conference (2010).
17. Y. Yamada, Y. Takaku, Y. Yagi, I. Nakagawa, T. Atsumi, M. Shirai, I. Ohnuma, and K. Ishida, Trans. Jpn. Inst. Electron. Packag. 2, 1 (2009).10.5104/jiepeng.2.1 ↗
18. Y. Yamada, Y. Takaku, Y. Yagi, I. Nakagawa, T. Atsumi, M. Shirai, I. Ohnuma, and K. Ishida, Microelectron. Reliab. 47, 12 (2007).10.1016/j.microrel.2007.07.102 ↗
19. S. Tanimoto, K. Matsui, Y. Zushi, S. Sato, Y. Murakami, M. Takamoti, and T. Iseki, J. Microelectron. Electron. Packag. 10, 2 (2012).
20. T. Yamaguchi, O. Ikeda, Y. Oda, S. Hata, K. Kuroki, H. Kuroda, and A. Hirose, J. Electron. Mater. 44, 2 (2015).
21. J. Li, B.W. Fon, S. Krishnan, and B. Knight, Electronic Components and Technology Conference (2013).
22. K. Suganuma, K.S. Kim, S.S. Kim, D.S. Kim, M. Kang, and S.J. Kim, Electronic Components and Technology Conference (2009).
23. The Japan Institute of Metals, Metal Data Book 4th Revision (Maruzen Company, 2004), ISBN 978-4-621-07367-4.