journal article·2016-11

Improvements in Fabrication of 3D SU-8 Prisms for Low-Coupling-Loss Interconnections Between Fibers and Waveguides

Minh-Hang Nguyen, Thi-Xuan Chu, Long Nguyen, Hai-Binh Nguyen, Chun-Wei Lee, Fan-Gang Tseng, Te-Chang Chen, Ming-Chang Lee

Journal of Electronic Materials· Volume 45· Issue 11
Publisher page

Abstract

Fabrication of three-dimensional (3D) SU-8 (an epoxy-based negative photoresist from MicroChem) prisms as low-loss couplers for interconnection between optical components, particularly optical fibers and silicon-on-isolator waveguides (SOI WGs), which have mismatched mode sizes, has been investigated. With an interfacial structure formed by a 3D SU-8 prism partly overlaying an SOI WG end with a portion of buried oxide (BOX) removed under the interface, low-loss coupling is ensured and the transmission efficiency can reach 70%. To fabricate these 3D SU-8 prisms, a simple method with two photolithography steps was used for SU-8 hinges and CYTOP (an amorphous fluoropolymer from AGC Chemicals) prism windows, with mild soft and hard bakes, to define the prism profiles with diluted SU-8 filled in the CYTOP prism windows. A buffered oxide etchant is used to remove BOX parts under the interfaces. Some of the fabricated structures were tested, demonstrating the contribution of overlaying SU-8 prisms to the transmission efficiency of optical interconnections between fibers and SOI WGs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photonic and Optical Devices · Photonic Crystals and Applications · Semiconductor Lasers and Optical Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. M.M. Tilleman, A. Kozhekin, R. Cohen, D. Haronian, and I. Nusinsky, IEE Proc. Optoelectron. 152, 145 (2005).10.1049/ip-opt:20041248 ↗
2. H. Yamada, PIERS Online 6, 165 (2010).10.2529/PIERS090906022025 ↗
3. H.P. Hsu, A.F. Milton, and W.K. Burns, Appl. Phys. Lett. 33, 63 (1978).
4. L. Nieradko, C. Gorecki, M. Józwik, and A. Sabac, J. Microlithogr. Microfabr. Microsyst. 5, 023009-1 (2006).
5. R. Yanga, S.A. Soperb, and W. Wanga, Sens. Actuators A Phys. 127, 123 (2006).10.1016/j.sna.2005.11.007 ↗
6. W. Bogaerts, W. Bogaerts, D. Taillaert, B. Luyssaert, P. Dumon, J. Van Campenhout, P. Bienstman, D. Van Thourhout, R. Baets, V. Wiaux, and S. Beckx, Opt. Express 12, 1583 (2004).10.1364/OPEX.12.001583 ↗
7. W.A. Pasmooij, P.A. Mandersloot, and M.K. Smit, J. Lightwave Technol. 1, 175 (1989).10.1109/50.17751 ↗
8. M.H. Nguyen, C.-J. Chang, M.-C. Lee, and F.-G. Tseng, Opt. Express 19, 18956 (2011).10.1364/OE.19.018956 ↗
9. M.-H. Nguyen, T.-H. Nguyen, H.-B. Nguyen, F.-G. Tseng, J.-R. Lai, M.-C. Lee, K.-N. Ku, in Proceedings of International Conference 3M-NANO 2014 (2014).
10. J.J. Kim, S.P. Yang, D.M. Keum, and K.H. Jeong, Opt. Express 22, 22089 (2014).10.1364/OE.22.022089 ↗
11. S. Keller Stephan, G. Blagoi, M. Lillemose, D. Haefliger, and A. Boisen, J. Micromech. Microeng. 18, 125020 (2008).10.1088/0960-1317/18/12/125020 ↗