Study of Sn and SnAgCu Solders Wetting Reaction on Ni/Pd/Au Substrates
Source abstract
Abstract
Wetting reactions of pure Sn and Sn-Ag-Cu solder balls on Au(100 A and 1000 A)/Pd(500 A)/Ni substrates were investigated. The (Au, Pd)Sn4 phase formed in the initial interfacial reaction between pure Sn and Au(100 A and 1000 A)/Pd(500 A)/Ni substrates. Then, the initially formed (Au, Pd)Sn4 compound layer either dissolved or spalled into the molten Sn solder with 3 s of reflowing. The exposed Ni under-layer reacted with Sn solder and formed an interfacial Ni3Sn4 compound. We did not observe spalling compound in the Sn-Ag-Cu case, either on the thin Au (100 A) or the thick Au (1000 A) substrates. This implies that the Cu content in the Sn-Ag-Cu solder can efficiently suppress the spalling effect and really stabilize the interfacial layer. Sn-Ag-Cu solder has a better wetting than that of the pure Sn solder, regardless of the Au thickness of the Au/Pd/Ni substrate. For both cases of pure Sn and Sn-Ag-Cu, the initial wetting (<3-s reflowing) on the thin Au (100 A) substrate is better than that of the thick Au (1000 A) substrate. Over 3-s reflowing, the wetting on the thicker Au layer (1000 A) substrate becomes better than the wetting on the thinner Au layer (100 A) substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. R. Ramanauskas, A. Selskis, J. Juodkazyte, and V. Jasulaitiene, Circuit World 39, 3 (2013).10.1108/CW-05-2013-0013 ↗
2. W. Li, 16th International Conference on Electronic Packaging Technology (2015), pp. 538–541.
3. W.H. Wu, C.S. Lin, S.H. Huang, and C.E. Ho, J. Electron. Mater. 39, 11 (2010).
4. S.S. Ha, J. Park, and S.B. Jung, Mater. Trans. 52, 8 (2011).10.2320/matertrans.M2010287 ↗
5. Y. Oda, M. Kiso, S. Kurosaka, A. Okada, K. Kitajima, S. Hashimoto, G. Milad, and D. Gudeczauskas, 41st International Symposium Microelectronics (Providence, RI, Nov 2–6, 2008).
6. Q.V. Bui and S.B. Jung, J. Mater. Sci. Mater. Electron. 25, 1 (2014).
7. M.F. Arenas and V.L. Acoff, J. Electron. Mater. 33, 12 (2004).10.1007/s11664-004-0086-x ↗
8. V. Vuorinen, T. Laurila, H. Yu, and J.K. Kivilahti, J. Appl. Phys. 99, 2 (2006).10.1063/1.2166647 ↗
9. S. Amore, E. Ricci, G. Borzone, and R. Novakovic, Mater. Sci. Eng. A 495, 1 (2008).10.1016/j.msea.2007.10.110 ↗
10. S. Kumar, D. Jung, and J. Jung, J. Mater. Sci. Mater. Electron. 24, 6 (2013).
11. D.A. Shnawah, M.F.M. Sabri, and I.A. Badruddin, Microelectron. Reliab. 52, 1 (2012).10.1016/j.microrel.2011.10.010 ↗
12. Y.T. Chin, P.K. Lam, H.K. Yow, and T.Y. Tou, Microelectron. Reliab. 48, 7 (2008).
13. C.H. Wang, K.T. Li, and C.Y. Lin, Intermetallics 67, 102 (2015).10.1016/j.intermet.2015.08.003 ↗
14. Y.H. Baek, B.M. Chung, Y.S. Choi, J. Choi, and J.Y. Huh, J. Alloys Compd. 579, 75 (2013).10.1016/j.jallcom.2013.05.055 ↗
15. C.Y. Liu, J. Li, G.J. Vandentop, W.J. Choi, and K.N. Tu, J. Electron. Mater. 30, 5 (2001).10.1007/s11664-001-0109-9 ↗
16. Y.T. Lai and C.Y. Liu, J. Electron. Mater. 35, 28 (2006).10.1007/s11664-006-0180-3 ↗
17. C.Y. Liu and K.N. Tu, J. Mater. Res. 13, 1 (1998).
18. P. Fima, T. Gancarz, J. Pstrus, K. Bukat, and J. Sitek, Solder. Surf. Mount Technol. 24, 2 (2012).10.1108/09540911211214640 ↗
19. N. Zhao, X.M. Pan, D.Q. Yu, H.T. MA, and L. Wang, J. Electron. Mater. 38, 6 (2009).