journal article·2017-03

CdS-Free p-Type Cu2ZnSnSe4/Sputtered n-Type In x Ga1−x N Thin Film Solar Cells

Wei-Liang Chen, Dong-Hau Kuo, Thi Tran Anh Tuan

Journal of Electronic Materials· Volume 46· Issue 3
Publisher page

Abstract

Cu2ZnSnSe4 (CZTSe) films for solar cell devices were fabricated by sputtering with a Cu–Zn–Sn metal target, followed by two-step post-selenization at 500–600°C for 1 h in the presence of single or double compensation discs to supply Se vapor. After that, two kinds of n-type III-nitride bilayers were prepared by radio frequency sputtering for CdS-free CZTSe thin film solar cell devices: In0.15Ga0.85N/GaN/CZTSe and In0.15Ga0.85N/In0.3Ga0.7N/CZTSe. The p-type CZTSe and the n-type InxGa1−xN films were characterized. The properties of CZTSe changed with the selenization temperature and the InxGa1−xN with its indium content. With the CdS-free modeling for a solar cell structure, the In0.15Ga0.85N/In0.3Ga0.7N/CZTSe solar cell device had an improved efficiency of 4.2%, as compared with 1.1% for the conventional design with the n-type conventional ZnO/CdS bilayer. Current density of ∼48 mA/cm2, the maximum open-circuit voltage of 0.34 V, and fill factor of 27.1% are reported. The 3.8-fold increase in conversion efficiency for the CZTSe thin film solar cell devices by replacing n-type ZnO/CdS with the III-nitride bilayer proves that sputtered III-nitride films have their merits.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. H. Katagiri, K. Jimbo, W.S. Maw, K. Oishi, M. Yamazaki, H. Araki, and A. Takeuchi, Thin Solid Films 517, 2455 (2009).10.1016/j.tsf.2008.11.002 ↗
2. K. Jimbo, R. Kimura, T. Kamimura, S. Yamada, W.S. Maw, H. Araki, K. Oishi, and H. Katagiri, Thin Solid Films 515, 5997 (2007).10.1016/j.tsf.2006.12.103 ↗
3. P. Jackson, D. Hariskos, R. Wuerz, O. Kiowski, A. Bauer, T.M. Friedlmeier, and M. Powalla, Phys. Status Solidi-Rapid Res. Lett. 9, 28 (2015).10.1002/pssr.201409520 ↗
4. A. Chirilă, P. Reinhard, F. Pianezzi, P. Bloesch, A.R. Uhl, C. Fella, L. Kranz, D. Keller, C. Gretener, H. Hagendorfer, D. Jaeger, R. Erni, S. Nishiwaki, S. Buecheler, and A.N. Tiwari, Nature Mater. 12, 1107 (2013).10.1038/nmat3789 ↗
5. D.H. Kuo, J.P. Hsu, and A.D. Saragih, Mater. Sci. Eng., B 186, 94 (2014).10.1016/j.mseb.2014.03.014 ↗
6. D.H. Kuo and J.P. Hsu, J. Cryst. Growth 372, 34 (2013).10.1016/j.jcrysgro.2013.03.013 ↗
7. B. Shin, Y. Zhu, N.A. Bojarczuk, S.J. Chey, and S. Guha, Appl. Phys. Lett. 101, 053903 (2012).10.1063/1.4740276 ↗
8. W.L. Chen, D.H. Kuo, and T.T.A. Tuan, J. Electron. Mater. 45, 688 (2016).10.1007/s11664-015-4174-x ↗
9. S. Nakamura, M. Senoh, N. Iwasa, S. Nagahama, T. Yamada, and T. Mukai, Jpn. J. Appl. Phys. 34, 1332 (1995).10.1143/JJAP.34.L1332 ↗
10. S. Nakamura, T. Mukai, and M. Senoh, Appl. Phys. Lett. 64, 1687 (1994).10.1063/1.111832 ↗
11. H. Tokunaga, H. Tan, Y. Inaishi, T. Arai, A. Yamaguchi, and J. Hidaka, J. Cryst. Growth 221, 616 (2000).10.1016/S0022-0248(00)00788-0 ↗
12. C.C. Li, D.H. Kuo, and Y.S. Huang, Mater. Sci. Semicond. Process. 29, 170 (2015).10.1016/j.mssp.2014.02.012 ↗
13. C.C. Li and D.H. Kuo, J. Mater. Sci.-Mater. Electron. 25, 1404 (2014).10.1007/s10854-014-1742-4 ↗
14. C.C. Li and D.H. Kuo, J. Mater. Sci.-Mater. Electron. 25, 1942 (2014).10.1007/s10854-014-1826-1 ↗
15. C.C. Li, D.H. Kuo, P.W. Hsieh, and Y.S. Huang, J. Electron. Mater. 42, 2445 (2013).10.1007/s11664-013-2635-7 ↗