journal article·2017-09Open access

Dry Etching Characteristics of MOVPE-Grown CdTe Epilayers in CH4, H2, Ar ECR Plasmas

K. Yasuda, M. Niraula, N. Araki, M. Miyata, S. Kitagawa, M. Kojima, J. Ozawa, S. Tsubota, T. Yamaguchi, Y. Agata

Journal of Electronic Materials· Volume 46· Issue 9

Abstract

Dry etching characteristics of single crystal (100) CdTe epitaxial layers grown on GaAs substrates were studied using CH4, H2, and Ar as process gases in an electron cyclotron resonance plasma. A smooth and anisotropic etching was obtained with CH4, H2, and Ar. No hydrocarbon polymer was found on the etched surface, which was confirmed by x-ray photoelectron spectroscopy measurement. Etching of the CdTe surface was also possible with H2 and Ar; however, no etching was observed in the absence of H2. Dependence of the etch rate on plasma gas composition and flow rates was studied. Mechanisms of etching with and without CH4 supply were also studied. Etched CdTe layers also showed no deterioration of electrical properties, which was confirmed by photoluminescence measurement at 4.2 K and Hall measurement at 300 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. K. Yasuda, M. Niraula, K. Noda, M. Yokota, H. Ohashi, K. Nakamura, M. Omura, I. Shingu, S. Minoura, R. Tanaka, and Y. Agata, IEEE Electron Device Lett. 27, 890 (2006).10.1109/LED.2006.884723 ↗
2. M. Niraula, K. Yasuda, K. Noda, K. Nakamura, I. Shingu, M. Yokota, M. Omura, S. Minoura, H. Ohashi, R. Tanaka, and Y. Agata, IEEE Trans Nuclear Sci. 54, 817 (2007).10.1109/TNS.2007.896219 ↗
3. M. Niraula, K. Yasuda, A. Watanabe, Y. Kai, H. Ichihashi, W. Yamada, H. Oka, T. Yoneyama, H. Nakashima, T. Nakanishi, K. Matsumoto, D. Katoh, and Y. Agata, IEEE Trans Nuclear Sci. 56, 836 (2009).10.1109/TNS.2008.2010256 ↗
4. M. Niraula, K. Yasuda, S. Namba, T. Kondo, S. Muramatsu, H. Yamashita, Y. Wajima, and Y. Agata, IEEE Electron Devices 59, 3450 (2009).10.1109/TED.2012.2222413 ↗
5. M. Niraula, K. Yasuda, N. Fujimura, T. Tachi, H. Inuzuka, S. Namba, T. Kondo, S. Muramatsu, and Y. Agata, IEEE Trans. Nuclear Sci. 59, 3201 (2014).10.1109/TNS.2012.2215628 ↗
6. K. Yasuda, M. Niraula, K. Nakamura, M. Yokota, I. Shingu, K. Noda, Y. Agata, K. Abe, and O. Eryu, J. Electron. Mater. 36, 837 (2007).10.1007/s11664-007-0105-9 ↗
7. S.J. Pearton and F. Ren, J. Vac. Sci. Technol., B 11, 15 (1993).10.1116/1.586718 ↗
8. R.C. Keller, M. Seelman Eggbert, and H.J. Ritchter, J. Electron. Mater. 24, 1155 (1995).10.1007/BF02653068 ↗
9. J.D. Benson, A.J. Stoltz, A.W. Kalaczyec, M. Martinka, L.A. Almeida, P.R. Boyd, and J.H. Dinan, J. Electron. Mater. 31, 822 (2002).10.1007/s11664-002-0244-y ↗
10. C.R. Eddy Jr, D. Leonhardt, V.A. Shamamian, J.R. Meyer, C.A. Hoffman, and J.E. Butler, J. Electron. Mater. 28, 347 (1999).10.1007/s11664-999-0231-7 ↗
11. R.C. Keller, M. Seelman Eggbert, and H.J. Ritchter, J. Electron. Mater. 25, 1270 (1996).10.1007/BF02655019 ↗
12. R.C. Keller, H. Zimmermann, M. Seelman Eggbert, and H.J. Ritchter, J. Electron. Mater. 26, 542 (1997).10.1007/s11664-997-0191-8 ↗
13. A.J. Stoltz, M. Jaime-Vasquez, J.D. Benson, J.B. Varesi, and M. Martinka, J. Electron. Mater. 35, 1461 (2006).10.1007/s11664-006-0284-9 ↗