journal article·2017-11

Effects of Forming Processes on the Microstructure and Solderability of Sn-3.5Ag Eutectic Solder Ribbons as well as the Mechanical Properties of Solder Joints

Shengfa Liu, Zhebing Hu, Jieran Xiong, Guanghua Tan, Wenyong Xiong, Chen Chen, Shangyu Huang

Journal of Electronic Materials· Volume 46· Issue 11
Publisher page

Abstract

Two kinds of Sn-3.5Ag eutectic solder ribbons of 0.13 mm thickness were prepared by a casting–rolling process and a rapid solidification process. The microstructure, phase constitution, melting characteristics, wetting behavior and soldering strength were compared using optical microscopy, scanning electron microscopy, x-ray diffraction, energy dispersive spectroscopy, differential scanning calorimetry and a MTS ceramic testing system. The results show that the microstructure of rapidly solidified solder is finer and more uniform, and the eutectic structure has a higher solid solubility and more homogeneous distribution of Ag in a Sn matrix. The solidus and liquidus temperature decreased, resulting in a 3.3% reduction of pasty range. In addition, the wettability and shear strength of the solder joints increased by 13.2% and 7.9%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. M. Sobhy, A.M. El-Refai, M.M. Mousa, and G. Saad, Mater. Sci. Eng. A 646, 82 (2015).10.1016/j.msea.2015.08.053 ↗
2. G. Chen, F. Wu, C. Liu, V.V. Silberschmidt, and Y.C. Chan, J. Alloys Compd. 656, 500 (2016).10.1016/j.jallcom.2015.09.178 ↗
3. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
4. E.H. Amalu and N.N. Ekere, J. Mater. Process. Technol. 212, 471 (2012).10.1016/j.jmatprotec.2011.10.011 ↗
5. W.R. Osório, D.R. Leiva, L.C. Peixoto, L.R. Garcia, and A. Garcia, J. Alloys Compd. 562, 194 (2013).10.1016/j.jallcom.2013.02.050 ↗
6. K.S. Kim, S.H. Huh, and K. Suganuma, Mater. Sci. Eng. A 333, 106 (2002).10.1016/S0921-5093(01)01828-7 ↗
7. E.J. Lavernia and T.S. Srivatsan, J. Mater. Sci. 45, 287 (2010).10.1007/s10853-009-3995-5 ↗
8. H. Jones, Mater. Sci. Eng. A 304, 11 (2001).10.1016/S0921-5093(00)01552-5 ↗
9. R.M. Shalaby, J. Alloys Compd. 505, 113 (2010).10.1016/j.jallcom.2010.05.179 ↗
10. M. Kamal and E.S. Gouda, Mater. Manuf. Process. 21, 736 (2006).10.1080/10426910600727890 ↗
11. J. Shen, Y.C. Liu, and J.Y. Han, Trans. Nonferrous Met. Soc. China 16, 59 (2006).10.1016/S1003-6326(06)60011-3 ↗
12. I. Dutta, C. Park, and S. Choi, Mater. Sci. Eng. A 379, 401 (2004).10.1016/j.msea.2004.03.023 ↗
13. T. Luo, Z. Chen, A. Hu, and M. Li, Mater. Sci. Eng. A 556, 885 (2012).10.1016/j.msea.2012.07.086 ↗
14. Q.K. Zhang, W.M. Long, X.Q. Yu, Y.Y. Pei, and P.X. Qiao, J. Alloys Compd. 622, 973 (2015).10.1016/j.jallcom.2014.11.030 ↗
15. J. Shen, Y. Liu, Y. Han, and H. Gao, Rare Met. 25, 365 (2006).10.1016/S1001-0521(06)60069-7 ↗
16. H.T. Lee and Y.F. Chen, J. Alloys Compd. 509, 2510 (2011).10.1016/j.jallcom.2010.11.068 ↗
17. U.R. Kattner and W.J. Boettinger, J. Electron. Mater. 23, 603 (1994).10.1007/BF02653345 ↗
18. J. Shen, Y.C. Liu, H.X. Gao, C. Wei, and Y.Q. Yang, J. Electron. Mater. 34, 1591 (2005).10.1007/s11664-005-0170-x ↗
19. M.J. Aziz, J. Appl. Phys. 53, 1158 (1982).10.1063/1.329867 ↗
20. X.Y. Li, F.Q. Zu, W.L. Gao, X. Cui, L.F. Wang, and G.H. Ding, Appl. Surf. Sci. 258, 5677 (2012).10.1016/j.apsusc.2012.02.058 ↗
21. H.T. Ma, J. Wang, L. Qu, N. Zhao, and A. Kunwar, J. Electron. Mater. 42, 2686 (2013).10.1007/s11664-013-2615-y ↗
22. T. Young, Philos. Trans. R. Soc. Lond. 95, 65 (1805).10.1098/rstl.1805.0005 ↗