journal article·2018-12

Morphology of Corrosion of an Al Thin Film Covered by Polymer Epoxy Under a Humidity Condition

Jin-Wook Jang, Seokwon Jeong, Sejin Yoo, Doo-Ho Kang, Chansik Kwon, Sangho An

Journal of Electronic Materials· Volume 47· Issue 12
Publisher page

Abstract

The corrosion morphology of a sputtered Al thin film covered with a polymer epoxy is investigated. After storage under a typical humidity condition of 85%/85°C (humidity/temperature) in the presence of Cl− ions, a uniform Al(OH)3 layer formed on the thin Al film; however, an irregular corrosion morphology was observed when the Al thin film was exposed to a direct acidic environment. This uniform corrosion is not related to structural defects in the Al thin film but rather to the nanopore structure in the polymer epoxy. Nanopores structure not only provides a fast diffusion path for water molecules, but also enables a uniform supply of water molecules to the surface of an Al thin film, which contribute to the uniform corrosion. A possible mechanism is also suggested for the electrical opening of the wirebonding as well as the formation of the uniform corrosion layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Copper Interconnects and Reliability · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. J.R. Davis, Corrosion of Aluminum and Aluminum Alloys, Chap. 1 (Materials Park: ASM International, 1991).
2. G. Harman, Wire Bonding in Microelectronics, Chap. 9 (New York: McGraw Hill, 2010).
3. S.K. Prasad, Advanced Wirebond Interconnection Technology, Chap.4 (New York: Kluwer Academic Publishers, 2004).
4. K.N. Tu, J. Appl. Phys. 94, 5451 (2003).10.1063/1.1611263 ↗
5. J.E. Vinson and J.J. Liou, Proc. IEEE 86, 399 (1998).10.1109/5.659493 ↗
6. J.W. McPherson, Reliability Physics and Engineering, Chap. 11 (New York: Springer, 2010).10.1007/978-1-4419-6348-2 ↗
7. X.J. Fan and E. Suhir, Moisture Sensitivity of Plastic Package of IC Devices, Chap. 2 (New York: Springer, 2010).10.1007/978-1-4419-5719-1 ↗
8. C.L. Soles, F.T. Chang, D.W. Gidley, and A.F. Yee, J. Polym. Sci. B Polym. Phys. 38, 776 (2000).10.1002/(SICI)1099-0488(20000301)38:5<776::AID-POLB15>3.0.CO;2-A ↗
9. M. Pecht, Handbook of Electronic Package Design, Chap. 11 (New York: Marcel Dekker, 1991).
10. J.J. Steppan, J.A. Roth, L.C. Hall, D.A. Jeannotte, and S.P. Carbone, J. Electrochem. Soc. 134, 175 (1991).10.1149/1.2100401 ↗
11. D.A. Jones, Principles and Prevention of Corrosion, Chap. 2 (Upper Saddle River: Prentice Hall, 1996).
12. V. Branzoi, F. Golgovici, and F. Branzoi, Mater. Chem. Phys. 78, 122 (2002).10.1016/S0254-0584(02)00222-5 ↗
13. L. Lantz, S. Hwang, and M. Pecht, Microelectron. Reliab. 42, 1163 (2002).10.1016/S0026-2714(02)00091-4 ↗
14. Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices, IPC/JEDEC J-STD-033B.1, 2007.
15. L.L. Shreir, Corrosion Volume 1. Metal/Environment Reactions (London: The Butterworth, 1976), p. 1:27.
16. I. Barin, Thermochemical Data of Pure Substances, Part I (New York: VCH, 1989), pp. 55–57.
17. K. James, IEEE Trans. Hybrid Packag. PHP13, 419 (1977).10.1109/TPHP.1977.1135223 ↗
18. E. Pollino, Microelectronic Reliability, Integrity Assessment and Assurance, Vol. II (Norwood: Artech House, 1989), p. 93.
19. P. Viswanadham and P. Singh, Failure Mode and Mechanism in Electronic Packages (New York: Chapman & Hall, 1998), p. 188.10.1007/978-1-4615-6029-6 ↗
20. R.R. Tummala, E.J. Rymaszewski, and A.G. Klopfenstein, Microelectronics Packaging Handbook, Semiconductor Packaging, Part II, Chap.10 (New York: Chapman & Hall, 1996).
21. D.G. Yang, K.M.B. Jansen, L.J. Ernst, G.Q. Zhang, H.J.L. Bressers, and J.H.J. Janssen, Microelectron. Reliab. 47, 233 (2007).10.1016/j.microrel.2006.09.031 ↗
22. F.J. Hernández, J.J. Santana, R.M. Souto, S. González, and J. Morales, Int. J. Electrochem. Sci. 6, 6567 (2011).10.1016/S1452-3981(23)19701-X ↗
23. B.B. Wang, Z.Y. Wang, W. Han, and W. Ke, Corros. Sci. 59, 63 (2012).10.1016/j.corsci.2012.02.015 ↗
24. E. McCafferty, Corros. Sci. 45, 1421 (2003).10.1016/S0010-938X(02)00231-7 ↗
25. T.E. Graedel, J. Electrochem. Soc. 136, 204C (1989).10.1149/1.2096869 ↗
26. M. Ohring, The Materials Science of Thin Films, Chap. 5 (Boston: Academic Press, 1992).
27. J.A. Thornton, J. Vac. Sci. Technol. A4, 3059 (1986).10.1116/1.573628 ↗
28. C.P. Hill and A.F. Cantor, Internal Corrosion Control in Water Distribution Systems (M58): AWWA Manual of Practice (American Water Works Association, 2010).
29. B.N. Popov, Corrosion Engineering: Principle and Solved Problems (Amsterdam: Elsevier, 2015).
30. C. Jang, B. Han, and S. Yoon, IEEE Trans. Comp. Pack. Technol. 33, 809 (2010).10.1109/TCAPT.2010.2063430 ↗
31. G.A. Young and J.R. Scully, Acta Mater. 46, 6337 (1998).10.1016/S1359-6454(98)00333-4 ↗
32. P.G. Shewmon, Diffusion in Solids, Chap. 2 (New York: McGraw-Hill Com, 1963).
33. N. Mogi and H. Yasuda, in Proceedings 42nd Electronic Components Technology Conference 18–20 May (1992), p. 1023.
34. C.L. Soles and A.F. Yee, J. Polym. Sci. B Polym. Phys. 38, 792 (2000).10.1002/(SICI)1099-0488(20000301)38:5<792::AID-POLB16>3.0.CO;2-H ↗