journal article·2019-05

Experimental Analysis of p-n Ge/SiGe-Based Thermoelectric Generators

Ameze Big-Alabo

Journal of Electronic Materials· Volume 48· Issue 5
Publisher page

Abstract

The research work involves the fabrication and testing of a Germanium/ silicon–germanium (Ge/SiGe)-based thermoelectric generator (TEG) module so as to determine its power generating capacity and thermal efficiency. The Ge/SiGe-based material is a nano-fabricated 2-dimensional Ge/SiGe superlattice that can be doped to obtain either p-type or n-type thermoelectric materials. A p-type and n-type Ge/SiGe heterostructures material was used to fabricate the p-n Ge/SiGe-based thermoelectric generators. Two sets of devices with similar design, but differing in dimension, were fabricated for testing purposes. Both devices had a temperature gradient created across the device in order to generate a Seebeck voltage. Two sets of temperature and voltage measurements were taken: one for open-circuit and another for closed-circuit connections. The experimental measurements of the Seebeck voltage were used to investigate the power generating capability and efficiency of the Ge/SiGe-based TEG module. It was observed that the smaller device performed better. This was attributed to the small contact resistance of 1.64 Ω, which was obtained for the smaller device, as compared to the larger contact resistance of 4.688 Ω for the bigger device. This behaviour is in line with theory and thus suggests that making smaller devices down to the micro- and nanoscale level yields better performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. L.F. Llin, A. Samarelli, S. Cecchi, T. Etzelstorfer, G.E. Muller, D. Chrastina, G. Isella, J. Stangl, J.M.R. Weaver, P.S. Dobson, and D.J. Paul, Appl. Phys. Letts. 103, 143507 (2013). https://doi.org/10.1063/1.4824100 .10.1063/1.4824100 ↗
2. A.F. Ioffe, Semiconductor Thermoelements and Thermoelectric Cooling (London: Infosearch, 1957).
3. R.P. Chasmar and R. Strattron, J. Electron. Control 7, 52 (1959).10.1080/00207215908937186 ↗
4. H. Bottner, G. Chen, and R. Venkatasububramanian, Aspects of thin-film super-lattice thermoelectric materials, devices, and applications. MRS Bull. 31, 211 (2006).10.1557/mrs2006.47 ↗
5. A. Odia, PhD dissertation, University of Glasgow (2017).
6. A. Samarelli, L.F. Llin, S. Cecchi, D. Chrastina, G. Isella, T. Etzelstorfer, J. Stangl, E.M. Gubler, J.M.R. Weaver, P. Dobson, and D.J. Paul, J. Electron. Mater. 43, 3838 (2014).10.1007/s11664-014-3233-z ↗
7. A. Odia, L.F. Llin, D.J. Paul, S. Cecchi, G. Isella, in 11th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME) (IEEE, 2015), p. 254.
8. jwnc.gla.ac.uk. Dry Etch. http://www.jwnc.gla.ac.uk/downloads/etching.pdf . Accessed 12 May 2015.
9. jwnc.gla.ac.uk. Dry Etch. http://www.jwnc.gla.ac.uk/etch.html . Accessed 25 May 2015.
10. W. Glatz, E. Schwyter, L. Durrer, and C. Hierold, J. Microelectro-Mech. Syst. 18, 763 (2009).10.1109/JMEMS.2009.2021104 ↗