journal article·2020-07

Enhancing the High-Temperature Thermoelectric Performance of Li(CoNi)O2 by Replacement of Ni with Earth-Abundant Mg

Aditya Dutt, Mofasser Mallick, Satish Vitta

Journal of Electronic Materials· Volume 49· Issue 7
Publisher page

Abstract

Oxides are mainly high-temperature thermoelectric materials due to their inherent thermal stability and also because of their low figure of merit at low temperatures, < 500 K. The compound Li1.1Co0.85Ni0.15O2, which was recently reported to exhibit a high figure of merit, has been modified by replacing divalent Ni with Mg, an earth-abundant element, to synthesize Li1.1Co0.85Ni0.15−xMgxO2 compounds with x = 0–0.15. All the compounds have the rhombohedral single phase belonging to the R$$ \bar{3} $$mH space group. The lattice parameters are found to be larger compared with LiCoO2 due to the substitutions. The electrical conductivity of all the compounds increases with increasing temperature, which is a semiconducting behavior, and is found to increase by four orders of magnitude from 0.2 Ω−1 m−1 to 2000 Ω−1 m−1 in the range 300–1100 K. The Seebeck coefficient in this range is positive and is found to be nearly independent of temperature ∼ 300 μV K−1, indicating a saturation behavior. The thermal conductivity decreases with increasing temperature, reaching a value of ∼ 1.5 W m−1 K−1. The high Seebeck coefficient combined with enhanced electrical conductivity and low thermal conductivity results in an increase in the power factor to 0.2 mW m−1 K−2, with a simultaneous increase in the figure of merit zT to 0.16 at 1100 K. These results clearly show that partial replacement of Ni2+ with Mg2+ not only makes the oxide more environmentally friendly, but also increases zT. The enhanced properties are found to be due to oxidation of Co3+ to Co4+ and Ni2+ to Ni3+ due to the addition of Mg.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. X.F. Zheng, C.X. Liu, Y.Y. Yan, and Q. Wang, Renew. Sustain. Energy Rev. 32, 486 (2014).10.1016/j.rser.2013.12.053 ↗
2. W. He, G. Zhang, X. Zhang, J. Ji, G. Li, and X. Zhao, Appl Energ 143, 1 (2015).10.1016/j.apenergy.2014.12.075 ↗
3. S. Chen and Z. Ren, Mater. Today 16, 387 (2013).10.1016/j.mattod.2013.09.015 ↗
4. Y. Shi, C. Sturm, and H. Kleinke, J. Solid State Chem. 270, 273 (2019).10.1016/j.jssc.2018.10.049 ↗
5. M. Christensen, S. Johnsen, and B.B. Iversen, Dalton Trans 39, 978 (2010).10.1039/B916400F ↗
6. Y. Yin, B. Tudu, and A. Tiwari, Vacuum 146, 356 (2017).10.1016/j.vacuum.2017.04.015 ↗
7. T. Reimann and J. Töpfer, J. Alloys Compd. 699, 788 (2017).10.1016/j.jallcom.2016.12.359 ↗
8. R. Kabir, T. Zhang, D. Wang, R. Donelson, R. Tian, T.T. Tan, and S. Li, J. Mater. Sci. 49, 7522 (2014).10.1007/s10853-014-8459-x ↗
9. M. Ohtaki, T. Tsubota, K. Eguchi, and H. Arai, J. Appl. Phys. 79, 1816 (1996).10.1063/1.360976 ↗
10. T. Nagira, M. Ito, S. Katsuyama, K. Majima, and H. Nagai, J. Alloys Compd. 348, 263 (2003).10.1016/S0925-8388(02)00799-5 ↗
11. C. Ruttanapun and S. Maensiri, J. Phys. D Appl. Phys. 48, 49 (2015).10.1088/0022-3727/48/49/495103 ↗
12. S. Shibasaki, W. Kobayashi, and I. Terasaki, Phys. Rev. B 74, 23 (2006).10.1103/PhysRevB.74.235110 ↗
13. K. Tanwar, D.S. Gyan, S. Bhattacharya, S. Vitta, A. Dwivedi, and T. Maiti, Phys. Rev. B 99, 17 (2019).10.1103/PhysRevB.99.174105 ↗
14. N.H. Turner, B.I. Dunlap, and R.J. Colton, Anal. Chem. 56, 373 (1984).10.1021/ac00269a026 ↗
15. B. Andriyevsky, K. Doll, and T. Jacob, Phys. Chem. Chem. Phys. 16, 23412 (2014).10.1039/C4CP03052D ↗
16. S. Laubach, S. Laubach, P.C. Schmidt, D. Ensling, S. Schmid, W. Jaegermann, A. Thissen, K. Nikolowski, and H. Ehrenberg, Phys. Chem. Chem. Phys. 11, 3278 (2009).10.1039/b901200a ↗
17. I. Terasaki, Y. Sasago, and K. Uchinokura, Phys. Rev. B 56, R12685 (1997).10.1103/PhysRevB.56.R12685 ↗
18. N.S. Krasutskaya, A.I. Klyndyuk, L.E. Evseeva, and S.A. Tanaeva, Inorg. Mater. 52, 393 (2016).10.1134/S0020168516030079 ↗
19. M.M. Mallick and S. Vitta, Inorg. Chem. 56, 5827 (2017).10.1021/acs.inorgchem.7b00476 ↗
20. M.W. Gaultois, T.D. Sparks, C.K.H. Borg, R. Seshadri, W.D. Bonificio, and D.R. Clarke, Chem. Mater. 25, 2911 (2013).10.1021/cm400893e ↗
21. Y. Shao-Horn, L. Croguennec, C. Delmas, E.C. Nelson, and M.A. O’Keefe, Nat. Mater. 2, 464 (2003).10.1038/nmat922 ↗
22. N. Yabuuchi, Y. Kawamoto, R. Hara, T. Ishigaki, A. Hoshikawa, M. Yonemura, T. Kamiyama, and S. Komaba, Inorg. Chem. 52, 9131 (2013).10.1021/ic4013922 ↗
23. J. Zheng, G. Teng, C. Xin, Z. Zhuo, J. Liu, Q. Li, Z. Hu, M. Xu, S. Yan, W. Yang, and F. Pan, J. Phys. Chem. Lett. 8, 5537 (2017).10.1021/acs.jpclett.7b02498 ↗
24. P. Ghosh, S. Mahanty, M.W. Raja, R.N. Basu, and H.S. Maiti, J. Mater. Res. 22, 1162 (2007).10.1557/jmr.2007.0157 ↗
25. H. Tukamoto and A.R. West, J. Electrochem. Soc. 144, 3164 (1997).10.1149/1.1837976 ↗
26. A.J.E. Rettie, W.D. Chemelewski, D. Emin, and C.B. Mullins, J. Phys. Chem. Lett. 7, 471 (2016).10.1021/acs.jpclett.5b02143 ↗
27. P.M. Chaikin and G. Beni, Phys. Rev. B 13, 647 (1976).10.1103/PhysRevB.13.647 ↗
28. J.-P. Doumerc, J. Solid State Chem. 109, 419 (1994).10.1006/jssc.1994.1124 ↗
29. W. Koshibae, K. Tsutsui, and S. Maekawa, Phys. Rev. B 62, 6869 (2000).10.1103/PhysRevB.62.6869 ↗