Minimization of the Surface Leakage Currents of High-Resistivity (Cd,Mn)Te Crystal Plates
Source abstract
Abstract
We report a method for minimization of the surface leakage current and reduction of the time-dependent degradation of (Cd,Mn)Te, a material under consideration for semiconductor X-ray and Gamma-ray detector applications. Preliminary characterization of the resistivity of the plates was achieved by use of an EU-ρ-μτ-SCAN. For semi-insulating samples the resistivity was in the range 108–109 Ω-cm. Electrical contacts were made on the lower and upper surfaces of each sample. After protection of the contacts, lateral surfaces were subjected to reaction with a variety of chemical substances. Subsequent chemical treatments of (Cd,Mn)Te single crystal platelets were studied to optimize passivation of the inter-electrode surfaces. The control voltage–current (I–V) characteristics were measured repeatedly at hourly and daily intervals. It was found that chemical etching in 10%Br-MeOH, then 1%Br-MeOH, and finally passivating the surfaces of the crystals with (NH4)2S reduces the surface leakage current.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Semiconductor Detectors and Materials · Nuclear Physics and Applications · Electron and X-Ray Spectroscopy Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (2)
Show source-provided references
1. K. Kim, S. Cho, J. Suh, J. Hong, and S. Kim, IEEE Trans. Nucl. Sci. 56, 858 (2009).10.1109/TNS.2009.2015662 ↗
2. M. Witkowska-Baran, D.M. Kochanowska, A. Mycielski, R. Jakieła, A. Wittlin, W. Knoff, A. Suchocki, P. Nowakowski, and K. Korona, Phys. Status Solidi (2014). doi: 10.1002/pssc.201300746 .