Li6NiNb2O9 Compound with Rock-Salt Crystal Structure and Its Microwave Dielectric Properties
Source abstract
Abstract
A ternary compound of Li6NiNb2O9 with a rock-salt structure was prepared by the conventional mixed oxide route, and after the ceramic preparation processes, its microwave dielectric properties were investigated. Ceramics with a single phase and a rock-salt crystal structure can be obtained under our optimized sintering conditions, and a disordered rock-salt structure for Li6NiNb2O9 compound can be confirmed by the Rietveld method. Relatively dense microstructures can be obtained under the sintering conditions of 1080°C/2.0 h, with microwave dielectric properties of e = 13.5, Q × f = 20,600 GHz (9.4 GHz) and τf = −33.9 ppm/°C. Although decomposition of such phase occurred when high sintering temperature was applied (> 1100°C), the density and microwave dielectric properties of the ceramics showed anomalous increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M.T. Sebastian, Dielectric materials for wireless communication, 1st edn. Elsevier Science, Oxford, 2008, p 1–1010.1016/B978-0-08-045330-9.00001-7 ↗
2. H. Ohsato, H. Ohsato, Ceram. Int., 2012, 38S, p S141.10.1016/j.ceramint.2011.04.068 ↗
3. M.T. Sebastian, R. Ubic, and H. Jantunen, M.T. Sebastian, R. Ubic, and H. Jantunen, Int. Mater. Rev., 2015, 60, p 392.10.1179/1743280415Y.0000000007 ↗
4. H. Ohsato, J. Varghese, and H. Jantunen, Dielectric losses of microwave ceramics based on crystal structure, 1st edn. IntechOpen, London, 2018, p 1–3
5. L.L. Yuan, and J.J. Bian, L.L. Yuan, and J.J. Bian, Ferroelectrics, 2009, 387, p 123.10.1080/00150190902966610 ↗
6. L.X. Pang, and D. Zhou, L.X. Pang, and D. Zhou, J. Am. Ceram. Soc., 2010, 93, p 3614.10.1111/j.1551-2916.2010.04152.x ↗
7. Z.F. Fu, P. Liu, J.L. Ma, X.G. Zhao, and H.W. Zhang, J. Euro. Ceram. Soc., 2016, 36, p 625.10.1016/j.jeurceramsoc.2015.10.040 ↗
8. Z.F. Fu, P. Liu, J.L. Ma, B.C. Guo, X.M. Chen, and H.W. Zhang, Z.F. Fu, P. Liu, J.L. Ma, B.C. Guo, X.M. Chen, and H.W. Zhang, Mater. Res. Bull., 2016, 77, p 78.10.1016/j.materresbull.2016.01.019 ↗
9. J.X. Bi, C.F. Xing, X.S. Jiang, C.H. Yang, and H.T. Wu, J.X. Bi, C.F. Xing, X.S. Jiang, C.H. Yang, and H.T. Wu, Mater. Let., 2016, 184, p 269.10.1016/j.matlet.2016.08.067 ↗
10. Y.X. Mao, H.L. Pan, Y.W. Zhang, Q.Q. Liu, and H.T. Wu, Y.X. Mao, H.L. Pan, Y.W. Zhang, Q.Q. Liu, and H.T. Wu, J. Mater. Sci. Mater. Electron., 2017, 28, p 13278.10.1007/s10854-017-7162-5 ↗
11. L. Cheng, H.L. Pan, M.F. Li, F. Ling, and H.T. Wu, L. Cheng, H.L. Pan, M.F. Li, F. Ling, and H.T. Wu, J. Mater. Sci. Mater. Electron., 2017, 28, p 14901.10.1007/s10854-017-7362-z ↗
12. H. Yang, B. Tang, Z.X. Fang, J. Luo, and S.R. Zhang, H. Yang, B. Tang, Z.X. Fang, J. Luo, and S.R. Zhang, J. Am. Ceram. Soc., 2018, 101, p 2202.10.1111/jace.15456 ↗
13. H.H. Guo, D. Zhou, L.X. Pang, and J.Z. Su, H.H. Guo, D. Zhou, L.X. Pang, and J.Z. Su, J. Materiomics, 2018, 4, p 368.10.1016/j.jmat.2018.09.002 ↗
14. C.J. Pei, C.D. Hou, Y. Li, G.G. Yao, Z.Y. Ren, P. Liu, and H.W. Zhang, C.J. Pei, C.D. Hou, Y. Li, G.G. Yao, Z.Y. Ren, P. Liu, and H.W. Zhang, J. Alloy Compd., 2019, 792, p 46.10.1016/j.jallcom.2019.04.019 ↗
15. H.H. Guo, D. Zhou, C. Du, P.J. Wang, W.F. Liu, L.X. Pang, Q.P. Wang, J.Z. Su, C. Singh, and S. Trukhanov, H.H. Guo, D. Zhou, C. Du, P.J. Wang, W.F. Liu, L.X. Pang, Q.P. Wang, J.Z. Su, C. Singh, and S. Trukhanov, J. Mater. Chem. C, 2020, 8, p 4690.10.1039/D0TC00326C ↗
16. W.E. Courtney, W.E. Courtney, IEEE Trans. Microwave Theory Technol., 1970, 18, p 476.10.1109/TMTT.1970.1127271 ↗
17. M.W. Lufaso, M.W. Lufaso, Chem. Mater., 2004, 16, p 2148.10.1021/cm049831k ↗
18. T. Joseph, and M.T. Sebastian, T. Joseph, and M.T. Sebastian, J. Am. Ceram. Soc., 2010, 93, p 147.10.1111/j.1551-2916.2009.03370.x ↗
19. E.S. Kim, and C.J. Jeon, E.S. Kim, and C.J. Jeon, J. Euro. Ceram. Soc., 2010, 30, p 341.10.1016/j.jeurceramsoc.2009.08.017 ↗
20. E.S. Kim, C.J. Jeon, and P.G. Clem, E.S. Kim, C.J. Jeon, and P.G. Clem, J. Am. Ceram. Soc., 2012, 95, p 2934.10.1111/j.1551-2916.2012.05274.x ↗
21. H. Luo, L. Fang, H.C. Xiang, Y. Tang, and C.C. Li, H. Luo, L. Fang, H.C. Xiang, Y. Tang, and C.C. Li, Ceram. Int., 2017, 43, p 1622.10.1016/j.ceramint.2016.10.107 ↗
22. Y.A. Alsabah, M.S. AlSalhi, A.A. Elbadawi, and E.M. Mustafa, Y.A. Alsabah, M.S. AlSalhi, A.A. Elbadawi, and E.M. Mustafa, J. Alloy Compd., 2017, 701, p 797.10.1016/j.jallcom.2017.01.203 ↗
23. S.Y. Wang, J.D. Chen, Y.J. Zhang, and Y.C. Zhang, S.Y. Wang, J.D. Chen, Y.J. Zhang, and Y.C. Zhang, J. Alloy Compd., 2019, 805, p 852.10.1016/j.jallcom.2019.07.118 ↗
24. L. Sebastian, and J. Gopalakrishnan, L. Sebastian, and J. Gopalakrishnan, J. Solid State Chem., 2003, 172, p 171.10.1016/S0022-4596(03)00010-0 ↗
25. M.V.V.M. Satya Kishore, S. Marinel, V. Pralong, V. Caignaert, S. D’Astorg, and B. Raveau, Mater. Res. Bull., 2006, 41, p 1378.10.1016/j.materresbull.2005.12.003 ↗
26. Y.W. Tseng, J.Y. Chen, Y.C. Kuo, and C.L. Huang, Y.W. Tseng, J.Y. Chen, Y.C. Kuo, and C.L. Huang, J. Alloy Compd., 2011, 509, p L308.10.1016/j.jallcom.2011.06.010 ↗
27. D. Zhou, H. Wang, L.X. Pang, X. Yao, and X.G. Wu, D. Zhou, H. Wang, L.X. Pang, X. Yao, and X.G. Wu, J. Am. Ceram. Soc., 2008, 91, p 4115.10.1111/j.1551-2916.2008.02764.x ↗
28. H.F. Zhou, X.L. Chen, L. Fang, and D.J. Chu, H.F. Zhou, X.L. Chen, L. Fang, and D.J. Chu, Jpn. J. Appl. Phys., 2010, 49, p 111506.10.1143/JJAP.49.111506 ↗