journal article·2021-07

Understanding Mixed Flowing Gas Tests: Copper versus Silver

Michael Osterman, Robert Utter

Journal of Electronic Materials· Volume 50· Issue 7
Publisher page

Abstract

Mixed flowing gas (MFG) testing is used to demonstrate the ability of an electronic product or system to survive in a corrosive environment. MFG testing is designed to corrode copper and silver, which are often used as electrical conductors in electronic products. However, MFG tests have failed to identify issues in recent years. These failures have been predominately related to the corrosion of silver. To understand these test escapes, the corrosion of silver and copper corrosion under MFG is examined. For comparison, a flower of sulfur (FoS) test at 75°C was also conducted. The test results show that the rate of copper and silver corrosion is not equivalent but varies depending on the gas concentration, which explains the failure escapes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Vacuum and Plasma Arcs · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. ANSI/ISA-S71.04-2013, ISA Standard–Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants (International Society of Automation, Research Triangle Park, NC, 2013).
2. G.K. Morris, C. Genthe, and R.A. Lukaszewski, in 2019 Annual Reliability and Maintainability Symposium (RAMS), Orlando, FL, USA (2019), pp. 1.
3. H. Rubin, V.C. Pascucci, J. Toran, R. Druckenmiller, M. Lipschutz, P. Conde, V. Vasudevan, J. Gupta, Y-H Oon, and C. Han, in 2019 IEEE Holm Conference on Electrical Contacts, Milwaukee, WI, USA (2019), pp. 324.
4. R. Zhang, J. Zhang, R. Schmidt, J. Gilbert, and B. Guo, Sci. Technol. Built Environ. 26, 4 (2020).
5. J.P. Franey, G.W. Kammlott, and T.E. Graedel, Corros. Sci. 25, 133 (1985).10.1016/0010-938X(85)90104-0 ↗
6. W.H. Abbott, IEEE Trans. Compon. Hybrids Manuf. Technol. 11, 22 (1988).
7. W.H. Abbott, Br. Corros. J. 24, 153 (1989).10.1179/000705989798270207 ↗
8. R. Gore, R. Witska, J.R. Kirby, and J. Chao, in Proceedings of the Thirty Fifth Meeting of the IEEE Holm Conference on Electrical Contacts, Chicago, IL, USA (1989), pp. 123.
9. J.L. Chao and R.R. Gore, Electrical Contacts-1991, in Proceedings of the Thirty-Seventh IEEE HOLM Conference on Electrical Contacts, Chicago, IL, USA (1991), pp. 216.
10. ASTM Designation B827–05, Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests (ASTM International, West Conshohocken, 2020).
11. ASTM Designation B845–97, Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts (ASTM International, West Conshohocken, 2018).
12. EIA-364-65B, Mixed Flowing Gas Test Procedure for Electrical Connectors and Sockets (Electronics Components Industry Association, Herndon, 2009).
13. IEC Standard 68-2-60, Environmental testing - Part 2-60: Tests- Test Ke: Flowing mixed gas corrosion test (International Electrotechnical Commission, Geneva, 2015).
14. W. Wang, A. Choubey, M.H. Azarian, and M. Pecht, J. Electron. Mater. 38, 815 (2009).10.1007/s11664-009-0761-z ↗
15. Y. Zhou and M. Pecht, in 8th International Conference on Reliability, Maintainability and Safety, Chengdu, China, (2009), pp. 1212.
16. S. Zhang, M. Osterman, A. Shrivastava, R. Kang, and M.G. Pecht, IEEE Trans. Dev. Mater. Res. 10, 71 (2010).10.1109/TDMR.2009.2033194 ↗
17. S. Zhang, R. Kang, and M.G. Pecht, IEEE Trans. Dev. Mater. Res. 11, 391 (2011).10.1109/TDMR.2011.2151194 ↗
18. ASTM B809-95, Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”) (ASTM International, West Conshohocken, 2018).
19. G. Vogel, Microelectron. Reliab. 64, 650 (2016).10.1016/j.microrel.2016.07.043 ↗
20. D. Lee, J. Lee, C.C. Chen, and A. Lin, 11th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), Taipei, Taiwan (2016), pp. 159.
21. K.A. Folgner, C.-T. Chu, Z.R. Lingley, H.I. Kim, J.-M. Yang, and J.D. Barrie, Appl. Opt. 56, C75 (2017).10.1364/AO.56.000C75 ↗
22. M.T. Kesim, H. Yu, Y. Sun, M. Aindow, and S.P. Alpay, Corros. Sci. 135, 12 (2018).10.1016/j.corsci.2018.02.010 ↗
23. Y. Salem, Int. J. Cult. Herit. 3, 1 (2018).
24. L. Sjögren, T. Hammam, and Å.K. Rudolphi, 2018 IEEE Holm Conference on Electrical Contacts, Albuquerque, NM (2018), pp. 475.
25. C-T. Chu, D.R. Alaan, J.D. Barrie, and P.D. Fuqua, Optical Interference Coatings Conference (OIC) 2019, OSA Technical Digest (Optical Society of America, 2019), paper MB.5 (2019).
26. K.A. Folgner, C.-T. Chu, S.D. Sitzman, S.C. Stuart, Z.R. Lingley, and J.D. Barrie, Appl. Opt. 59, A187 (2020).10.1364/AO.375891 ↗
27. T.E. Graedel, J.P. Franey, G.J. Gualtieri, G.W. Kammlott, and D.L. Malta, Corros. Sci. 25, 1163 (1985).10.1016/0010-938X(85)90060-5 ↗
28. T.E. Graedel, J. Electrochem. Soc. 139, 1963 (1992).10.1149/1.2221162 ↗
29. D.W. Rice, P. Peterson, E.B. Rigby, P.B.P. Phipps, R.J. Cappell, and R. Tremoureux, J. Electrochem. Soc. 128, 275 (1981).10.1149/1.2127403 ↗
30. H. Fu, P, Singh, A. Kazi, W. Ables, D. Lee, J. Lee, K. Guo, J. Li, S. Lee, and G. Tong, in SMTA Int’l, Rosemont, IL (2015).
31. P. Singh, L. Palmer, H. Fu, D. Lee, J. Lee, K. Guo, J. Li, S. Lee, G. Tong, and C. Xu, in SMTA Int’l, Rosemont, IL (2018).
32. A cost-effective & convenient approach to creep corrosion testing, White Paper, iNEMI, Morrisville, NC (2018).
33. H. Fu, C. Chen, P. Singh, J. Zhang, A. Kurella, X. Chen, X. Jiang, J. Burlingame, and S. Lee, J. SMTA 25, 11 (2012).
34. H. Fu, P. Singh, L, Campbell, J, Zhang, W. Ables, D. Lee, J. Lee, J. Li, S. Zhang, and S. Lee., in Proceedings of IPC APEX EXPO, Las Vegas, USA (2014), pp. 25.
35. P. Singh, M. Cole, T. Kiraly, J.S.K. Tan, R. Rangaraj, G. Woods, and T. Chang, in SMTA Int’l, Rosemont, IL (2016), pp. 931.
36. H. Fu, P. Singh, D. Lee, J. Lee, K. Guo, J. Liu, S. Lee, S Lee, G. Tong, and C. Xu, in Proceedings of IPC APEX EXPO, San Diego, CA (2017).
37. P. Singh, L. Palmer, D. Lee, J. Lee, K. Guo, J. Liu, S. Lee, G. Tong, C. Xu, D. Fleming, and H. Fu, International Conference on Electronics Packaging (ICEP), Yamagata, Japan (2017), pp. 41.
38. P. Singh, L. Palmer, H. Fu, D. Lee, J. Lee, K. Guo, J. Liu, S. Lee, G. Tong, and C. Xu, in SMTA Int’l, Rosemont, IL, USA (2017).
39. P. Singh, L. Palmer, H. Fu, D. Lee, J. Lee, K. Guo, J. Liu, S. Lee, G. Tong, and C. Xu, in Proceedings of IPC APEX EXPO, San Diego, CA (2018).
40. Qualification test development for creep corrosion, Project Report, iNEMI, Morrisville, NC (2018).
41. P. Singh, L. Palmer, H. Fu, D. Lee J. Lee, K. Guo, J. Li, S. Lee, G. Tong, and C. Xu, 2018 Pan Pacific Microelectronics Symposium (Pan Pacific), Waimea, HI (2018), pp. 1.
42. P. Singh, L. Palmer, H. Fu, D. Lee J. Lee, K. Guo, J. Li, S. Lee, G. Tong, and C. Xu, 2019 Pan Pacific Microelectronics Symposium (Pan Pacific), Kauai, HI, USA (2019), pp. 1.
43. D. Lee, C. Chen, J. Lee, L. Yao, C. C. Chen, and A. Lin, 12th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), Taipei (2017), p. 263.
44. B. Yuan, D.A. Fleming, H. Rubin, R. Popowich, R.L. Opila, and C. Xu, in SMTA Int’l, Rosemont, IL (2017).
45. K. Demirkan, G.E. Derkits Jr., D.A. Fleming, J.P. Franey, K. Hannigan, R.L. Opila, J. Punch, W.D. Reents Jr., M. Reid, B. Wright, and C. Xu, J. Electrochem. Soc. 157, c30 (2010).10.1149/1.3258288 ↗
46. K. Hannigan, M. Reid, M.N. Collins, E. Dalton, C. Xu, B. Wright, K. Demirkan, R.L. Opila, W.D. Reents Jr., J.P. Franey, D.A. Fleming, and J. Punch, J. Electron. Mater. 41, 611 (2012).10.1007/s11664-011-1799-2 ↗
47. B. Meyer, Chem. Rev. 76, 367 (1976).10.1021/cr60301a003 ↗
48. L. Greenspan, J. Res. Natl. Bur. Stand. 81A, 89 (1977).10.6028/jres.081A.011 ↗