Properties of Multiwalled Carbon Nanotube-Reinforced Alumina Composites Produced Following the Sol-Spray Technique
Source abstract
Abstract
Multi-wall carbon nanotube (MWNT)-reinforced alumina composites were prepared by a sol-spray process combined with a vacuum hot press process. The relative densities of all the samples were higher than 97%. Scanning electron microscopy (SEM) results showed that the MWNTs were well-dispersed in the alumina matrix; specifically, most of them were distributed along the grain boundaries in the form of networks, whereas the others were located in the grains. For 0.5 wt.% MWNTs, the Vicker hardness and fracture toughness were 32.1% and 75.6% higher than those of pure alumina, and the average increment of the thermal diffusivity under different test temperatures is ~ 26.2%. When the content of MWNTs is higher than 0.5 wt.%, the composites showed conductor properties. Moreover, the percolation threshold of the prepared composites was 0.37 wt.% with the nonlinear fitting of conductivity data, which indicates that the MWNTs were well dispersed in the alumina matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. S. Iijima, Nature 354, 56 (1991).10.1038/354056a0 ↗
2. C. Ke, C.C. Jia, and W.S. Li, Appl. Phys. A 110, 269 (2013).10.1007/s00339-012-7450-0 ↗
3. K.F. Chan, M. Zaid, M.S. Mamat, S. Liza, and Y. Yaakob, Curr. Comput.-Aided Drug Des. 11, 457 (2021).
4. S.S. Park, M.S. Moorthy, and C.S. Ha, Korean J. Chem. Eng. 31, 1707 (2014).10.1007/s11814-014-0221-1 ↗
5. R.U. Hassan, F. Shahzad, N. Abbas, and S. Hussain, J. Mater. Sci-Mater El. 30, 6304 (2019).
6. J.R. Martinelli, and F.F. Sene, Ceram. Int. 26, 325 (2000).10.1016/S0272-8842(99)00059-0 ↗
7. H.J. Kim, J.H. Kim, K.W. Jun, J.H. Kim, W.C. Seung, O.H. Kwon, J.Y. Park, S.W. Kim, and I.K. Oh, Adv. Energy Mater. 6, 8 (2016).
8. C. Li, T. Liang, W. Lu, C. Tang, X. Hu, M. Cao, and L. Ji, Compos. Sci. Technol. 64, 2089 (2004).10.1016/j.compscitech.2004.03.010 ↗
9. T.-H. Lee, S.-H. Cho, T.-G. Lee, H.T. Kim, I.-K. You, and S. Nahm, J. Am. Ceram. Soc. 101, 7 (2018).
10. D.L. Chung, Carbon 39, 279 (2001).10.1016/S0008-6223(00)00184-6 ↗
11. M.A. Singh, D.K. Sarma, O. Hanzel, J Sedlá?Ek, and ?ajgalík, J. Eur. Ceram. Soc. 37, 3107 (2017). https://doi.org/10.1016/j.jeurceramsoc.2017.03.058.10.1016/j.jeurceramsoc.2017.03.058 ↗
12. C.H. Kuo, and H.M. Huang, J. Therm. Anal. Calorim. 103, 533 (2011).10.1007/s10973-010-1088-y ↗
13. B. Lanfant, Y. Leconte, N. Debski, G. Bonnefont, and F. Bernard, Ceram. Int. 45, 2566 (2019).10.1016/j.ceramint.2018.10.187 ↗
14. A.B. Kaiser, and G.S. Düsberg Roth, Phys. Rev. B 57, 1418 (1998).10.1103/PhysRevB.57.1418 ↗
15. I. Momohjimoh, N. Saheb, M.A. Hussein, T. Laoui, and N. Al-Aqeeli, Ceram. Int. 46, 16008 (2020).10.1016/j.ceramint.2020.03.151 ↗
16. B. Lanfant, Y. Leconte, N. Debski, M. Pinault, M. Mayne, N. Herlin, G. Bonnefont, V. Garnier, Y. Jorand, and G. Fantozzi, TechConnect World, Washington (2014). https://www.hal.univ-lille.fr/LFP-CEA/hal-01095227
17. C. Liu, and J. Ding, Procedia Manuf. 48, 763 (2020).10.1016/j.promfg.2020.05.111 ↗
18. G.D. Zhan, and A.K. Mukherjee, Int. J. Appl. Ceram. Tec. 1, 161 (2010).10.1111/j.1744-7402.2004.tb00166.x ↗
19. N. Saheb, and U. Hayat, Ceram. Int. 43, 5715 (2017).10.1016/j.ceramint.2017.01.112 ↗
20. K. Lee, B.M. Chan, S.B. Park, and S.H. Hong, J. Am. Ceram. Soc. 94, 3774 (2011).10.1111/j.1551-2916.2011.04689.x ↗
21. L. Kumari, T. Zhang, G.H. Du, W.Z. Li, Q.W. Wang, A. Datye, and K.H. Wu, Ceram. Int. 35, 1775 (2009).10.1016/j.ceramint.2008.10.005 ↗
22. M. Estili, and Y. Sakka, Sci. Technol. Adv. Mat. 15, 064902 (2014).10.1088/1468-6996/15/6/064902 ↗
23. S.C. Zhang, W.G. Fahrenholtz, G.E. Hilmas, and E.J. Yadlowsky, J. Eur. Ceram. Soc. 30, 1373 (2010).10.1016/j.jeurceramsoc.2009.12.005 ↗
24. S.M. Barinov, L.V. Fateeva, S.V. Yurashev, B. Ballóková, and E. Rudnayová, Powder Metall. Prog. 2, 4 (2002).
25. J. Lin, G. Fan, Z. Li, X. Kai, Z. Di, Z. Chen, S. Humphries, G. Heness, and W.Y. Yeung, Carbon 49, 1965 (2011).10.1016/j.carbon.2010.12.014 ↗
26. Viana, Bruno, Zych, Eugeniusz, Gao, Yun, Chen, Wei, Peng, and Mingying, A Special Issue on Functional Nanomaterials and Applications (2017). https://doi.org/10.1166/jnan.2014.1214.10.1166/jnan.2014.1214 ↗
27. X. Wang, and A. Atkinson, J. Eur. Ceram. Soc. 35, 3713 (2015).10.1016/j.jeurceramsoc.2015.05.005 ↗
28. P.M. Groffman, J.S. Baron, T. Blett, A.J. Gold, I. Goodman, L.H. Gunderson, B.M. Levinson, M.A. Palmer, H.W. Paerl, and G.D. Peterson, Ecological Thresholds (2006). https://www.xueshu.baidu.com/usercenter/paper/show?paperid=d04d52516983035f936db3a00480fe04&site=xueshu_se.
29. M. Sahimi, Percolation Processes (American Cancer Society, 2003). https://doi.org/10.1002/3527600434.eap581.10.1002/3527600434.eap581 ↗
30. D.J. Bergman, Phys. Rev. Lett. 44, 1285 (1980).10.1103/PhysRevLett.44.1285 ↗
31. N. Cewen, Prog. Mater. Sci. 37, 1 (1993).10.1016/0079-6425(93)90004-5 ↗
32. Y. Ben-Menahem, and M. Hemmo, Probability in Physics (Berlin Heidelberg: Springer, 2012).10.1007/978-3-642-21329-8 ↗