journal article·2025-06Open access

Application of Ion Energy Spectroscopy to Optimize the Pulsed Laser Deposition Parameters for SrTiO3−y Films

Marcus Rose, R. Shipra, Jeonggoo Kim, Shiva Pokhrel, Richard Seabrease, Ryan Paxson, Madison Previti, David Schaefer, Rajeswari Kolagani

Journal of Electronic Materials· Volume 54· Issue 6

Abstract

Abstract Reproducible modulation of subtle property variations in metal oxide thin films by pulsed laser deposition (PLD) involves optimizing a multiparameter process with several coupled deposition parameters. This task can be simplified by utilizing the fact that three of the key deposition parameters—the laser fluence, the target-to-substrate distance, and the ambient gas pressure—influence the film properties through the ion energy distribution in the plasma plume. Thus, mapping the ion energy distribution during film growth in real time serves to generate a signature graph representing a combination of these three deposition parameters. Ion energy spectroscopy (IES) is a recently developed tool that measures the plasma ion energy distribution in real time. Here, we report our research on using IES characterization for the growth of strontium titanate thin films by PLD. We observe that the measured ion energies have a direct correlation with laser fluence and an inverse correlation with the oxygen pressure. Films deposited under lower oxygen pressure show lattice expansion and increased electrical conductivity characteristic of oxygen deficiency that can originate from the oxygen loss due to re-sputtering bombardment by high-energy ions, in addition to the reduction in oxygen incorporation rates. Increasing the laser fluence also has similar effects on the lattice constants, indicating oxygen loss due to re-sputtering. However, the resistivity increases with laser fluence, which may be attributed to the defects induced by ion bombardment. Our results demonstrate the potential of IES analysis for the optimization of metal oxide thin film growth by PLD.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · Semiconductor materials and devices · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Y. Bao and F. Zhang, Electronic engineering of ABO3 perovskite metal oxides based on d 0 electronic-configuration metallic ions toward photocatalytic water splitting under visible light. Small Struct. 3, 2100226 (2022).10.1002/sstr.202100226 ↗
2. M. Arya, S. Kumar, D. Hasina, S. Ojha, A. Arora, V.K. Malik, A. Mitra, T. Som, and S. Dhar, Ta-doped SrTiO3 epitaxial thin film: a promising perovskite for optoelectronics. J. Appl. Phys. 129, 145109 (2021).10.1063/5.0042672 ↗
3. K.A. Mïller, W. Berlinger, and E. Tosatti, Indication for a novel phase in the quantum paraelectric regime of SrTiO3. Zeitschrift Für Physik B Condensed Matter 84, 277 (1991).10.1007/BF01313549 ↗
4. W. Li, J. Shi, K.H. Zhang, and J.L. MacManus-Driscoll, Defects in complex oxide thin films for electronics and energy applications: challenges and opportunities. Mater. Horiz. 7, 2832 (2020).10.1039/D0MH00899K ↗
5. F. Gunkel, D.V. Christensen, Y.Z. Chen, N. Pryds, Oxygen vacancies: The (in)visible friend of oxide electronics. Appl. Phys. Lett. 116 (2020).10.1063/1.5143309 ↗
6. J.F. Schooley, W.R. Hosler, E. Ambler, J.H. Becker, M.L. Cohen, and C.S. Koonce, Dependence of the superconducting transition temperature on carrier concentration in semiconducting SrTiO3. Phys. Rev. Lett. 14, 305 (1965).10.1103/PhysRevLett.14.305 ↗
7. W. Gong, H. Yun, Y.B. Ning, J.E. Greedan, W.R. Datars, and C.V. Stager, Oxygen-deficient SrTiO3−x, x = 0.28, 0.17, and 0.08 Crystal growth, crystal structure, magnetic, and transport properties. J. Solid State Chem. 90, 320 (1991).10.1016/0022-4596(91)90149-C ↗
8. P.P. Balakrishnan, M.J. Veit, U.S. Alaan, M.T. Gray, Y. Suzuki, Metallicity in SrTiO3 substrates induced by pulsed laser deposition. APL Mater. 7 (2019).10.1063/1.5080939 ↗
9. T. Ohnishi, M. Lippmaa, T. Yamamoto, S. Meguro, and H. Koinuma, Improved stoichiometry and misfit control in perovskite thin film formation at a critical fluence by pulsed laser deposition. Appl. Phys. Lett. 87, 241919 (2005).10.1063/1.2146069 ↗
10. N.A. Shepelin, Z.P. Tehrani, N. Ohannessian, C.W. Schneider, D. Pergolesi, and T. Lippert, A practical guide to pulsed laser deposition. Chem. Soc. Rev. 52, 2294 (2023).10.1039/D2CS00938B ↗
11. C. Xu, S. Wicklein, A. Sambri, S. Amoruso, M. Moors, and R. Dittmann, Impact of the interplay between nonstoichiometry and kinetic energy of the plume species on the growth mode of SrTiO3 thin films. J. Phys. D Appl. Phys. 47, 034009 (2013).10.1088/0022-3727/47/3/034009 ↗
12. C. Ma and C. Chen, Chapter 1: pulsed laser deposition for complex oxide thin film and nanostructure, Advanced Nano Deposition Methods. ed. Y. Lin, and X. Chen (Chemical Industry Press, 2016), pp. 1–31.
13. A.N. Khodan, S. Guyard, J.P. Contour, D.G. Crété, E. Jacquet, and K. Bouzehouane, Pulsed Laser Deposition of epitaxial SrTiO3 films: Growth, structure and functional properties. Thin Solid Films 515, 6422 (2007).10.1016/j.tsf.2006.11.099 ↗
14. IES User Guide, Neocera LLC. (2014).
15. P.C. Joshi and S.B. Krupanidhi, Structural and electrical characteristics of SrTiO3 thin films for dynamic random access memory applications. J. Appl. Phys. 73, 7627 (1993).10.1063/1.353960 ↗
16. E.J. Tarsa, E.A. Hachfeld, F.T. Quinlan, J.S. Speck, and M. Eddy, Growth-related stress and surface morphology in homoepitaxial SrTiO3 films. Appl. Phys. Lett. 68, 490 (1996).10.1063/1.116376 ↗